• Title/Summary/Keyword: 무시

Search Result 2,215, Processing Time 0.03 seconds

A Study on Lateral Movement of Bridge Abutment on Soft Ground (연약지반상 교대의 측방이동에 관한 연구)

  • 홍원표;한중근
    • Geotechnical Engineering
    • /
    • v.10 no.4
    • /
    • pp.53-66
    • /
    • 1994
  • In case of using pile foundation to support bridge abutments on soft ground, the soft ground often causes serious troubles such as lateral movement of the bridge abutments. The foundation piles in soil undergoing lateral movement is one of the typical passive piles. However, Generally, on design of the piles for abutments, the piles have not been considered as a passive piles; sofar:. Because it is difficult to assess the effect of the lateral movement on the desigin and reasonable design method is not established yet. In this study, several abutments, of which lateral movement was taken place, was investigated. Based on the investigation a criterion was presented to assess the lateral movement of the soft soil under backfill for abutment. By use of the criterion, the lateral movement of abutment could be predicted. As the results of thin study, it was anon that the lateral movement of abutment could be occured when the safety factor of slope stability is lese than either 1.5(without the pile effect) or 1.8 (with the pile effect). Especially, excessive lateral movements were occurred when the safety factor of slope stability is less than either 1.0(without the pile effect) or 1.1 (with the pile effect).

  • PDF

Engineering Properties of the Non-Cement Mortar using the Fly ash from Combined Heat Power Plant and Recycled Fine Aggregate (열병합발전소 플라이애시와 순환잔골재를 사용한 무시멘트 모르타르의 공학적 특성)

  • Nam, Han-Kook;Lim, Jeong-Geun;Lee, Sang-Soo
    • Journal of the Korea Institute of Building Construction
    • /
    • v.15 no.6
    • /
    • pp.553-559
    • /
    • 2015
  • In this study, to suggest the application method of recycled fine aggregate, the non-cement mortar was prepared and studied with the binders of blast furnace slag, fly ash, and fly ash from combined heat power plant. As a basic experiment, a series of tests was conducted to determine the potions of the binders and types of activator. When the binder was consisted with 20% of fly ash and 40% of fly ash from combined heat power plant, the highest strength of the mortar was obtained, and as an activator, the combination of sodium hydroxide 2.5%, and calcium hydroxide 7.5% showed the highest strength of the mortar. Therefore, this study focuses on engineering properties of mortar contains fly ash from combined heat power plant and recycled fine aggregate according to replacement ratio of recycled fine aggregate based on the optimum mix from the basic experiment. As a result, the best replacement ratio of recycled fine aggregate is 75%.

Effects of Lime and Phosphate Applications on Growth and Nitrogen Fixation of Alfalfa in Acid Soil (산성토양에서 석회와 인산시용이 Alfalfa의 생장 및 질소고정에 미치는 영향)

  • Jeon, U-Bok;Choe, Gi-Chun;Kim, Jeong-Cheol;Kim, Dong-Hu;Kwang Hyun Kim
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.13 no.4
    • /
    • pp.274-277
    • /
    • 1993
  • We investigated the effects of applications of various levels of lime(0, 250, 500 and 1,000 kg/10a) and phosphate (0, 17 and 34 kg/10a) on growth and nitrogen fixation of alfalfa (Medicago sativa L.). Effects of lime and phosphate applications were significantly different on dry matter (DM) weight of each part and on acetylene reduction activity (ARA) of alfalfa at 9 weeks alter sowing (p<.05). The effect of lime on DM of shoot and root was not significantly different at 14 weeks after sowing (early bloom stage), but that of phosphate on DM was significantly improved as increasing of phosphate levels (p<.01). The effects of lime and phosphate on ARA were significantly increased (p<.05). Application of lime and phosphate decreased total nitrogen (TN) content of each part of alfalfa at 9 weeks after sowing (p<.05). The effects of lime application on TN was higher but that of phosphate application on TN was lower than no application of lime or phosphate at 14 weeks after sowing (p<.05).

  • PDF

초정지역의 지하수 수위강하에 따른 지하수함양율 산출

  • 이주영;정형재;안중기;문상기;이미선
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2002.04a
    • /
    • pp.173-175
    • /
    • 2002
  • 지하수함양은 크게 강우 중에 침투되는 자연함양, 하천 또는 저수지에서 침투되는 지표수 함양, 인위적으로 물을 지하로 침투시키는 인공함양 등이 있는데, 본 연구에서는 강우에 의해 지하로 침투되는 자연함양율을 구하기 위하여 다음 두 가지 방법을 이용하여 지하수함양율을 산출하고자 하였다. 첫 번째 누적강수량과 지하수수위곡선을 이용하는 방법(문상기, 우남칠, 2001)은 강우기간 중 누적강수량을 고려하여 지하수위변화로부터 지하수함양율을 추정하고, 두 번째 무강우기간 동안의 지하수위감수곡선을 이용하는 방법(최병수, 안중기, 1998)은 토양특성, 증발산을 배재한 상태에서 무강우기간의 지하수위감쇠곡선으로부터 함양량을 추정한다. 즉 같은 지역에서 선행강우기간 중 지하수침투가 시작되는 강우량과 어떤 시점에서의 강우기간 중 지하수침투가 시작되는 강우량의 차이가 토양함수조건에 따라 다를 수 있으나 평균개념으로 볼 때 그 차이가 무시될 수 있다고 가정하여 토양특성을 배재하고, 지하수수위가 지표에서 1.0~l.5m이상 되면 지하수로부터의 증발산은 무시될 수 있다고 가정하고 있다. 연구지역은 충청북도 청원군 북일면과 북이면에 위치하며, 지하수위 장기관측은 암반관정과 충적관정을 두 지점에 설치하여 총 4개의 관측정에서 지하수위자동측정기 Orphimedes (기포식수위계, OTT Hydrometrie사 제작)로 1시간 간격으로 지하수위변화를 기록하였다(그림1, 그림2). 강우량은 현장에서 자기우량계(모델명 : HGR-200, SEBA Hydrometrie사 제작)를 설치하여 직접 측정하였고, 자료가 유실된 기간은 청주기상대 자료로 보완하였다. 그러나 본 연구지역은 면적이 32.35$\textrm{km}^2$이고 1998년까지 개발된 기설관정의 개수가 무려 1,547여공으로 단위면적당 관정수는 48여공/$\textrm{km}^2$로 다른 지역에 비해 관정이 밀집되어 있어 지하수연간사용량을 무시할 수 없다. 그림2에서 보는 바와 같이 주변관정들의 양수로 인하여 관측정에서의 지하수위변화가 영향을 받는 것을 알 수 있다. 그러므로 본 연구지역을 대상으로 추정한 함양율은 지하수이용에 따른 지하수위하강에 대한 보정을 할 필요가 있으며 지하수이용실태조사를 추가로 하여 그 이용량만큼을 지하수함양량에 더하여야 할것이다.

  • PDF

Evaluation of Flexural Behavior of Reinforced Concrete Beams Using Alkali Activated Slag Concrete (알칼리 활성 슬래그 콘크리트를 사용한 철근 콘크리트 보의 휨거동 평가)

  • Lee, Kwang-Myong;Seo, Jung-In
    • Journal of the Korea Concrete Institute
    • /
    • v.27 no.3
    • /
    • pp.311-317
    • /
    • 2015
  • Cement zero concrete produced by alkali-activators and industrial by-products such as slag instead of cement, enables to solve the environmental pollution problems provoked by the exhaustion of natural resources and energy as well as the discharge of carbon dioxide. However, researches on the cement zero concrete are still limited to material studies and thus, study on the structural behavior of relevant members is essential to use the cement zero concrete as structural materials. This paper aims to evaluate experimentally and analytically the flexural behavior of RC beams using 50 MPa alkali activated slag concrete. To achieve such a goal, flexural tests on three types of RC beam specimens were conducted. A nonlinear analysis model is proposed using the modulus of elasticity and stress-strain relationship of alkali activated slag concrete. The analysis results obtained by the proposed model agree well with the experimental results, which could verify the validity of the proposed model.

Shear Behavior of RC Beams Using Alkali Activated Slag Concrete (알칼리 활성 슬래그 콘크리트를 사용한 RC 보의 전단거동)

  • Choi, Sung;Lee, Kwang-Myong;Yoo, Sung-Won
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.3 no.1
    • /
    • pp.58-63
    • /
    • 2015
  • Several researches on cement zero concrete using alkali-activators have been conducted to investigate its fundamental material properties such as slump, strength and durability, however, research on the structural behavior of relevant members involving the elastic modulus, stress-strain relationship is essential for the application of this cement zero concrete to structural members. In this paper the shear behavior of reinforced concrete beams using 50 MPa-alkali activated slag concrete was experimentally evaluated. To achieve such a goal, six reinforced concrete beam specimens were fabricated and their shear behaviors were observed. The maximum difference between test results and analysis results in crack shear stress for beam specimens without stirrups is 31%, while that for beam specimens with stirrup is 15%. Furthermore, it is also found that the shear strength of alkali activated slag concrete is by 22~57% greater than the nominal shear strength calculated by design code, implying that shear design equations would provide conservative results on the safety side.

Nonignorable Nonresponse Imputation and Rotation Group Bias Estimation on the Rotation Sample Survey (무시할 수 없는 무응답을 가지고 있는 교체표본조사에서의 무응답 대체와 교체그룹 편향 추정)

  • Choi, Bo-Seung;Kim, Dae-Young;Kim, Kee-Whan;Park, You-Sung
    • The Korean Journal of Applied Statistics
    • /
    • v.21 no.3
    • /
    • pp.361-375
    • /
    • 2008
  • We propose proper methods to impute the item nonresponse in 4-8-4 rotation sample survey. We consider nonignorable nonresponse mechanism that can happen when survey deals with sensitive question (e.g. income, labor force). We utilize modeling imputation method based on Bayesian approach to avoid a boundary solution problem. We also estimate a interview time bias using imputed data and calculate cell expectation and marginal probability on fixed time after removing estimated bias. We compare the mean squared errors and bias between maximum likelihood method and Bayesian methods using simulation studies.

A Study on the Quality Properties of Alkali-activated cement free Mortar using Industrial by-products (산업부산물을 사용한 알칼리 활성 무시멘트 모르타르의 품질특성에 관한 연구)

  • Kwon, Yong-Hun;Kwon, Yeong-Ho;Lee, Dong-Gyu
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.1 no.1
    • /
    • pp.58-66
    • /
    • 2013
  • This study investigated quality properties of alkali activated cement free mortar using industrial by-product such as cement kiln dust(CKD), silica fume(SF) and quartz sand powder(SP) to compare with previous research about blast furnace slag(BS) and fly ash(FA). The results were as following. All materials were effective to increase compressive strength, however they showed different tendency on flowability. CKD and SP increased flowability, but on the other hand SF did not because it's blain was great difference with other materials. Flowability and compressive strength were related with grading distributions of binders because CKD, SP and SF which had small particle size filled up BS and FA. Application of industrial by-products with various grading distributions could be effective for the high early strength and flowability of alkali activated cement free mortar using BS.