• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.746-754
• /
• 2016

Smart healthcare systems, a convergent industry based on information and communications technologies (ICT), has emerged from personal health management to remote medical treatment as a distinguished industry. The smart healthcare environment provides technology to deliver vital information, such as pulse rate, body temperature, health status, and so on, from wearable devices to the hospital network where the physician is located. However, since it deals with the patient's personal medical information, there is a security issue for personal information management, and the system may be vulnerable to cyber-attacks in wireless networks. Therefore, this study focuses on a key-development and device-management system to generate keys in the smart environment to safely manage devices. The protocol is designed to provide safe communications with the generated key and to manage the devices, as well as the generated key. The security level is analyzed against attack methods that may occur in a healthcare environment, and it was compared with existing key methods and coding capabilities. In the performance evaluation, we analyze the security against attacks occurring in a smart healthcare environment, and the security and efficiency of the existing key encryption method, and we confirmed an improvement of about 15%, compared to the existing cipher systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.267-273
• /
• 2012

The short-range communication module was developed in this paper which is suitable for the point-to-multipoint circumstances of 40 terminals communicating frequently in about 50 meters. The media access control layer of this communication module using asynchronous time-division multiplexing provides a fast and robust performance even in the worst case of simultaneous transmission events, and low packet error rate was measured a in LOS (Line-of-sight) circumstance by adding the function of acknowledge response to media access control layer. The difference test was carried out in order to measure the performance of point-to-multipoint communication. Two communication modules are respectively measured and graphed in 10 branches to 40 branches. The communication module developed in this paper showed a faster performance than the commercial Zigbee module in the specific case presented in this paper. Especially, in over 20 branches showed wide differences of the transmission speed. This results is caused by more network overhead of Zigbee whose wider applications needs the network layer and applicaiton layer besides media access control layer. Also, the asynchronous time-division multiplexing proposed in this paper are more suitable than CSMA-CA of Zigbee module when a lot of module ought to be frequently communicated in small area.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.3-11
• /
• 2016

In the environment of Internet of Things (IoT), IoT devices are limited by physical components such as power supply and memory, and also limited to their network performance in bandwidth, wireless channel, throughput, payload, etc. Despite these limitations, resources of IoT devices are shared with other IoT devices. Especially, remote management of the information of devices and patients are very important for the IoT healthcare service, moreover, providing the interoperability between the healthcare device and healthcare platform is essential. To meet these requirements, format of the message and the expressions for the data information and data transmission need to comply with suitable international standards for the IoT environment. However, the ISO/IEEE 11073 PHD (Personal Healthcare Device) standards, the existing international standards for the transmission of health informatics, does not consider the IoT environment, and therefore it is difficult to be applied for the IoT healthcare service. For this matter, we have designed and implemented the IoT healthcare system by applying the oneM2M, standards for the Internet of Things, and ISO/IEEE 11073 DIM (Domain Information Model), standards for the transmission of health informatics. For the implementation, the OM2M platform, which is based on the oneM2M standards, has been used. To evaluate the efficiency of transfer syntaxes between the healthcare device and OM2M platform, we have implemented comparative performance evaluation between HTTP and CoAP, and also between XML and JSON by comparing the packet size and number of packets in one transaction.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.5
• /
• pp.38-48
• /
• 2007

In ubiquitous environment, sensor networks that sense and transmit surrounding data without human intervention will become more important. If sensors are installed for detecting vehicles and measuring their speed in the road and that real-time information is given to drivers, it will be very effective for enhancing safety and controlling traffic in the road. In this paper, we proposed a new reliable and real-time sensor MAC protocol between AP and sensor nodes in order to provide real-time traffic flow information based on ubiquitous sensor networks. The proposed MAC allocates one TDMA slot for each sensor node on the IEEE 802.15.4 based channel structure, introduces relayed communication for distant sensors, and adopts a frame structure that supports retransmission for the case of errors. In addition, the proposed MAC synchronizes with AP by using beacon and adopts a hybrid tracking mode that supports economic power consumption according to various traffic situations, We implemented a simulator for the proposed MAC by using sim++ and evaluated various performances. The simulation results show that the proposed MAC reduces the power consumption and reveals excellent performance in real-time application systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.179-187
• /
• 2014

The underlay protocol is a cognitive radio method in which secondary or cognitive users use the same frequency without affecting the quality of service (QoS) for the primary users. In addition, because of the broadcast characteristics of the wireless environment, some nodes, which are called eavesdropper nodes, want to illegally receive information that is intended for other communication links. Hence, Physical Layer Security is applied considering the achievable secrecy rate (ASR) to prevent this from happening. In this paper, a performance analysis of the amplify-and-forward scheme under an interference constraint and Physical Layer Security is investigated in the cooperative communication mode. In this model, the relays use an amplify-and- forward method to help transmit signals from a source to a destination. The best relay is chosen using an opportunistic relay selection method, which is based on the end-to-end ASR. The system performance is evaluated in terms of the outage probability of the ASR. The lower and upper bounds of this probability, based on the global statistical channel state information (CSI), are derived in closed form. Our simulation results show that the system performance improves when the distances from the relays to the eavesdropper are larger than the distances from the relays to the destination, and the cognitive network is far enough from the primary user.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.85-90
• /
• 2017

Indoor location-based services have been developed based on the Internet of Things technologies which measure and analyze users who are moving in their daily lives. These various indoor positioning technologies require separate hardware and have several disadvantages, such as a communication protocol which becomes complicated. Based on the fact that a reduction in signal strength occurs according to the distance due to the physical characteristics of the transmitted signal, RSSI technology that uses the received signal strength of the wireless signal used in this paper measures the strength of the transmitted signal and the intensity of the attenuated received signal and then calculates the distance between a transmitter and a receiver, which requires no separate costs and makes to implement simple measurements. It was applied calculating the value for the average RSSI and the RSSI filtering feedback. Filtering is used to reduce the error of the RSSI values that are measured at long distance.It was confirmed that the RSSI values through the average filtering and the RSSI values measured by setting the coefficient value of the feedback filtering to 0.5 were ranged from -61 dBm to - 52.5 dBm, which shows irregular and high values decrease slightly as much as about -2 dBm to -6 dBm as compared to general measurements.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.8
• /
• pp.9-18
• /
• 2004

The IEEE 802.11 Distributed Coordination Function(DCF) protocol provides a contention-based distribution channel access mechanism for stations to share the wireless medium. However, the performance of the DCF drops dramatically in terms of throughput, delay and delay jitter as the number of active stations becomes large. In this paper, we propose a simple and effective scheme, called DCF/VG(Distributed Coordination Function with Virtual Group), for improving the performance of the IEEE 802.11 DCF mechanism. In this scheme, each station independently decides the virtual group cycle using the information provided by the carrier sensing mechanism. The virtual group cycle consists of one or more virtual groups and a virtual group includes an idle period and a busy period. Each station operates in only one out of several virtual groups of the virtual group cycle and does not operate in the others. In other words, each station decreases its backoff counter and tries to transmit a packet only in its virtual group like the IEEE 802.11 DCF. Performance of the proposed scheme is investigated by numerical analysis and simulation. Numerical and simulation results show that the proposed scheme is very effective and has high throughput and low delay and jitter under a wide range of contention level.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.144-155
• /
• 2013

This paper presents a low-cost remote power-quality-failure monitoring system (RPMS) using Android App and TI MCU (micro-controller unit), which is appliable to a micro-grid. The designed RPMS testbed consists of smart nodes, a server, and Android APPs. Especially, the C2000-series MCU-based RPMS smart node that is low-cost compared to existing monitoring systems has both a signal processing function for power signal processing and a data transmission function for power-quality monitoring data transmission. The signal processing function implements both a wavelet-based power failure detection algorithm including sag, swell, and interruption, and a FFT-based power failure detection algorithm including harmonics such that reliable and real-time power quality monitoring is guaranteed. The data transmission function implements a low-complexity RPMS transmission protocol and defines a simple data format (msg_Diag) for power monitoring message transmission. We may watch the monitoring data in real time both at a server and Android phone Apps connected to the WiFi network (or WAN). We use RS-232 (or Bluetooth) as the wired (or wireless) communication media between a server and nodes. We program the RPMS power-quality-failure monitoring algorithm using C language in the CCS (Code Composer Studio) 3.3 environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.752-757
• /
• 2016

Machine to Machine (M2M) communications is communications between a business application and devices via a communication network without any direct human interaction. The aim of our research is to connect any M2M device with an M2M AS (Application server) through an IMS (IP Multimedia Subsystem) Network Core using a M2M Gateway, in order to develop an M2M Horizontal Services Platform over IMS. An IP Multimedia Subsystem (IMS) is an architectural framework defined by the wireless standards body of the 3rd Generation Partnership Project (3GPP) for delivering IP multimedia services to mobile users. This paper shows the design and implementation of a Horizontal M2M Network Services Platform over an IP Multimedia Subsystem (IMS) using the Message Session Relay Protocol (MSRP). We summarize the protocols and architectures that formed the basis for the creation of our architecture. We provide a detailed description of our architecture design, describing the call flow of the proposed architecture and the entities operating in each process. We also describe the design and implementation process detailing the different tools used, explaining the selection of each component and its importance; also how we designed and implemented the M2M gateway, M2M Application Server, Open IMS Core, business application and M2M devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5B
• /
• pp.475-488
• /
• 2003

To prevent performance degradation of TCP due to packet losses in the smooth handoff by the route optimization extension of Mobile IP protocol, a buffering of packets at a base station is needed. A buffering of packets at a base station recovers those packets dropped during handoff by forwarding buffered packets at the old base station to the mobile user. But, when the mobile user moves to a congested base station in a new foreign subnetwork, those buffered packets forwarded by the old base station are dropped and TCP transmission performance of a mobile user in the congested base station degrades due to increased congestion by those forwarded burst packets. In this paper, considering the general case that a mobile user moves to a congested base station, we analyze the influence of packet buffering on TCP performance according to handoff arrival distribution for Drop-tail and RED (Random Early Detection) buffer management schemes. Simulation results show that RED scheme can reduce the congestion increased by those forwarded burst packets comparing Drop-Tail, but RED scheme cannot avoid Global Synchronization due to forwarded burst packets by the old base station and new buffer management scheme to avoid it is needed in Mobile IP based networks.