• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.1
• /
• pp.42-47
• /
• 1999

This paper presents the information transmission between on-board and ground-site in MAGLEV. considering safety and high speed operation and density operation, information transmission between them is necessary. Therefore it is necessary for transmission system to ensure high speed transmission, low error rate, massive information, and reliability of information. To provide above conditions, 1.1km signal line assembly was constructed and Frequency Shift Keying(FSK) modulation and Open System Interconnection(OSI) based high-level data link control(HDLC) protocol are applied. To modulate digital signal for transmission from ground-site to on-board, carrier frequency of 70kHz is used and 90khz is used for transmission from on-board to ground-site. Transmission speed is 2400bps for consideration of train speed, quantity of information, and data error rate. And this paper introduces information monitoring considering user interface and presents the method for an effective data transmission in MAGLEV which is now being tested and intends to provide for an intelligent train operation system in future.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.158-159
• /
• 2011

Energy efficiency in wireless sensor networks (WSNs) is one significant factor that needs to be considered when making any designs or doing any enhancements on the communication protocol stack. In WSNs using traditional geographic routing, when a sensor node receives a data packet that needs to be transmitted to the sink, it will forward the packet to the neighbor node which is closest to the sink. The traditional geographic routing assumes that the link quality is always 100%. This may cause a bad result as per which we waste too many energy for retransmissions between the two nodes. Thus, the problem here is how to select such node as forwarder at most efficiently in the aspect of both energy consumption and the distance toward the destination. The better node we choose, the more energy we can conserve for the whole network. In this paper, we propose a next-hop forwarding selection metric, called Energy Consumption for Transmission (ECT), which can resolve the above problem in the best way.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.136-138
• /
• 2005

무선 브로드캐스트 환경에서는 모바일 클라이언트의 제한된 배터리와 클라이언트에서 서버로의 제한된 상향 대역폭 등의 문제로 기존의 동시성 제어 기법을 그대로 사용할 수 없다. 이런 문제를 해결하고자 많은 동시성 제어 기법들이 연구되어 왔는데, 지금까지 제안된 기법들은 편향된 데이터의 접근 패턴을 반영한 브로드캐스트 환경을 고려하지 못하고 있다. 무선 브로드캐스트 환경에서 서버는 일반적으로 모바일 클라이언트의 접근 패턴을 고려하여 편향된 접근 빈도를 갖는 데이터 아이템을 브로드캐스트 한다. 본 논문에서는 무선 브로드캐스트 환경에서 편향된 데이터 접근 패턴을 고려한 동시성 제어 기법을 제안한다. 제안하는 기법은 브로드캐스트 디스크 모델에서 전체 메이저 브로드캐스트 주기마다. 모바일 트랜잭션을 위한 제어 정보를 보내는 것이 아니라 일정한 마이너 브로드캐스트 주기마다. 제어 정보를 전송한다. 이는 접근 빈도가 놓은 데이터가 갱신된 경우 갱신된 내용을 마이너 그룹마다 반영하므로 읽기 전용 트랜잭션이 접근하는 데이터가 최신 정보임을 보장할 뿐만 아니라 갱신 트랜잭션이 최종 검증을 위해서 상향 통신 대역폭을 이용하는 횟수를 줄이고, 보다. 빠른 재실행을 통해 모바일 트랜잭션의 평균 응답시간을 줄여줄 수 있다. 또한 모바일 트랜잭션의 요청이 편향된 경우, 반복적인 트랜잭션의 중단, 재실행으로 인한 성능 저하를 개선하고자 정적 백오프 기법을 이용하여 모바일 트랜잭션 간 충돌 가능성을 줄여준다. 마지막으로 시뮬레이션을 통해 기존의 기법들에 비해 평균 접근 시간, 상향 통신 대역폭 등의 사용량이 현저히 줄어드는 것을 보임으로써 제안하는 기법의 성능을 검증한다.한 평균 access time을 최소화하는 동시에 클라이언트들의 제한된 에너지 소비를 최소화하는데 목적이 있다. 제안기법에 대한 평가는 수학적 분석을 통해 HIDAF 기법과 기존의 브로드캐스트 기법의 성능을 비교 분석한다.하였으나 사료효율은 증진시켰으며, 후자(사양, 사료)와의 상호작용은 나타나지 않았다. 이상의 결과는 거세비육돈에서 1) androgen과 estrogen은 공히 자발적인 사료섭취와 등지방 침적을 억제하고 IGF-I 분비를 증가시키며, 2) 성선스테로이드호르몬의 이 같은 성장에 미치는 효과의 일부는 IGF-I을 통해 매개될 수도 있을을 시사한다. 약 $70 {\~} 90\%$의 phenoxyethanol이 유상에 존재하였다. 또한, 미생물에 대한 항균력도 phenoxyethanol이 수상에 많이 존재할수록 증가하는 경향을 나타내었다. 따라서, 제형 내 oil tomposition을 변화시킴으로써 phenoxyethanol의 사용량을 줄일 수 있을 뿐만 아니라, 피부 투과를 감소시켜 보다 피부 자극이 적은 저자극 방부시스템 개발이 가능하리라 보여 진다. 첨가하여 제조한 curd yoghurt는 저장성과 관능적인 면에서 우수한 상품적 가치가 인정되는 새로운 기능성 신제품의 개발에 기여할 수 있을 것으로 사료되었다. 여자의 경우 0.8이상이 되어서 심혈관계 질환의 위험 범위에 속하는 수준이었다. 삼두근의 두겹 두께는 남녀 각각 $20.2\pm8.58cm,\;22.2\pm4.40mm$으로 남녀간에 유의한 차이는 없었다. 조사대상자의 식습관 상태는 전체 대상자의 $84.4\%$가 대부분

• Journal of the Korea Society for Simulation
• /
• v.20 no.4
• /
• pp.31-40
• /
• 2011

Sensor nodes are easily exposed to malicious attackers by physical attacks. The attacker can generate various attacks using compromised nodes in a sensor network. The false report generating application layers injects the network by the compromised node. If a base station has the injected false report, a false alarm also occurs and unnecessary energy of the node is used. In order to defend the attack, a statistical en-route filtering method is proposed to filter the false report that goes to the base station as soon as possible. A path renewal method, which improves the method, is proposed to maintain a detection ability of the statistical en-route filtering method and to consume balanced energy of the node. In this paper, we proposed the secure path cycle method to consume effective energy for a path renewal. To select the secure path cycle, the base station determines through hop counts and the quantity of report transmission by an evaluation function. In addition, three methods, which are statistical en-route filter, path selection method, and path renewal method, are evaluated with our proposed method for efficient energy use. Therefore, the proposed method keeps the secure path and makes the efficiency of energy consumption high.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1431-1439
• /
• 2016

In this paper, we propose a new location service and location-based routing for data dissemination from a source to a mobile group sink in less energy consumption of the sensor node. Unlike the existing protocols, the proposed protocol uses a leader sink instead of a group area as the location information to represent a mobile sink group. The proposed protocol also uses grid leaders on virtual grid structure to support sink mobility in location service. By using a leader sink as a representative and grid leaders for mobility supporting, the proposed protocol can exploit an efficient hierarchical location service and data dissemination method without using flooding. Accordingly, the proposed protocol carries out upper layer location services and data dissemination between a leader sink and a source and lower layer location services and data dissemination between the leader sink and member sinks. Simulation results demonstrate that the proposed protocol achieves energy-efficiency.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.458-465
• /
• 2007

Wireless Sensor Network(WSN) is a special network that collects measured data by sensor nodes in the predefined sensor field and forwards them to the base station in a distance using their own routing scheme. WSN requires routing techniques to maximize energy efficiency because sensor nodes have non-rechargeable and thus limited energy. Characteristics of WSN are various according to applications, many of routing algorithms have been proposed. This paper proposes an algorithm called A-PEGASIS that basically bases on PEGASIS and enhances in two aspects - an elegant chain generation algorithm and periodical update of chains. We compare performance of the previous algorithm of LEACH, PEGASIS, PEDAP and PEDAP-PA with ours through simulation. It confirms that the A-PEGASIS is most superior in terms of average WSN lifetime and high probability of node survival rate during WSN life time.

• Convergence Security Journal
• /
• v.7 no.2
• /
• pp.107-118
• /
• 2007

Distributed wireless sensor network in various environment have characteristic that is surveillance of environment-element and offering usefully military information but there is shortcoming that have some secure risks. Therefore secure service must be required for this sensor network safety. More safe and effective techniques of node administration are required for safe communication between each node. This paper proposes effective cluster-header and clustering techniques in suitable administration techniques of group-key on sensor network. In this paper, first each node transmit residual electric power and authentication message to BS (Base-Station). BS reflects "Validity Authentication Rate" and residual electric power. And it selects node that is more than these regularity values by cluster header. After BS broadcasts information about cluster header in safety and it transmits making a list of information about cluster member node to cluster header. Also, Every rounds it reflects and accumulates "Validity Authentication Rate" of former round. Finally, BS can select more secure cluster header.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.137-148
• /
• 2012

In this paper, we proposed the location-aware coordinate routing algorithm for improving the performance of routing algorithm by using ZigBee in Smart Grid environment. A distributed address allocation scheme used an existing algorithm that has wasted in address space. The x, y and z coordinate axes from divided address space of 16 bit to solve this problems. However, coordinate routing does not take account of wireless link condition. If wiress link condition is not considered, when the routing table is updated, the nodes with bad link conditions are updated in the routing table and can be chosen as the next hop. This brings out the retransmissions because of received packet's errors. Also, because of these retransmissions, additional power is consumed. In this paper, we propose the location-aware coordinate routing algorithm considering wiress link condition, where reliable data transmission is made and the consumed enegy is minimize. and we compared and connected region and transition region of ZigBee location based routing in the aspect of average number of multi hops, subordinate packet delivery ratio, delay time, and energy consumption of proposed algorithm. It turned out that there were improvements in performances of each items.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.25-36
• /
• 2016

The goal of the SmartGrid is to maximize energy efficiency by exchanging bi-directional real-time power information with the help of ICT(Information and Communication Technology). In this paper, we propose a "JRS-MS" (Joint Routing and Scheduling for Multi-channel SmartGrid) algorithm that uses numerical modeling methods in IEEE 802.11s based STDMA multi-channel SmartGrid NAN networks. The proposed algorithm controls the amount of data transmission adaptively at the link layer and finds a high data-rate path which has the least interference between traffic flows in multi-channel SmartGrid NAN networks. The proposed algorithm improve transmission performance by enhancing network utilization. By comparing the results of performance analysis between the proposed algorithm and the JRS-SG algorithm in the previous paper, we showed that the JRS-MS algorithm can improve transmission performance by maximally utilizing given network resources when the number of flows are increasing in the multi-hop NAN wireless mesh networks.

• Journal of KIISE
• /
• v.42 no.10
• /
• pp.1268-1279
• /
• 2015

In order to manage a large number of devices connected to the Internet of Things (IoT), the Internet Engineering Task Force (IETF) proposed the IPv6 Routing Protocol for Low Power and Lossy Networks (RPL). The route of the RPL network is generated through the use of an Objective Function (OF) that is suitable for the service that is required for the IoT network. Since the route of the RPL network is conventionally simply chosen only by considering the link quality between the nodes, it is sensible to seek an OF that can also provide better Quality of Service (QoS). In previous studies, the end-to-end delay might possibly be sub-optimal because they only deal with problems related to the reduction of energy consumption and not to the link quality on the path to the sink node. In this study, we propose a scheme that reduces the end-to-end delay but also gives full consideration to both the quality on the entire route to the destination and to the expected lifetime of nodes with bottlenecks from heaped traffic. Weighting factors for the proposed scheme are chosen by experiments and the proposed scheme can reduce the end-to-end delay and the energy consumption of previous studies by 20.8% and 10.5%, respectively.