• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11c
• /
• pp.2215-2218
• /
• 2002

본 논문에서는 핸드폰, PDA 등과 같은 모바일 단말기에 인터넷 서비스를 제공할 수 있는 응용서버인 모바일 응용서버의 설계 및 구현 방법에 대해 제안한다. 제안하는 응용서버는 여러 가지 유형의 모바일 단말기에 공통적으로 서비스할 수 있는 중간 형태의 모바일 응용을 작성하고 이를 요청한 단말기의 특징 및 제약에 따라 적절히 변환된 컨텐츠를 단말기에 보여줌은 물론, 여러 단말기를 이용하여 하나의 세션을 수행할 수 있는 멀티 모달 세션 기능을 지원한다. 응용서버는 크게 세 부분으로 구성된다. 첫째는 모바일 단말기로부터 요청을 받아 모바일 요청(Mobile Request)을 생성하는 모바일 요청 생성부이고, 둘째는 모바일 요청을 받아 특정 응용을 처리하는 모바일 엔진 (Mobile Engine)부이다. 그리고 마지막으로 모바일 단말기 제약 및 무선 통신과 관련된 제약 사항을 해결하기 위한 환경 적응 관련 모듈들이 있다. 이처럼 제안하는 모바일 응용서버는 모바일 환경에서 다양한 단말기를 이용한 서비스를 지원은 물론 멀티 모달 세션을 지원함으로써 보다 다양한 형태의 인터넷 서비스를 효과적으로 제공할 수 있다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11c
• /
• pp.1847-1850
• /
• 2002

최근에 이동통신기술의 발전과 무선인터넷 사용자의 급증 및 휴대 단말기 장치의 성능 향상으로 인하여 사용자의 위치 정보를 활용하여 부가 정보 서비스를 받을 수 있는 위치기반서비스(LBS Location Based Service)에 대한 관심이 급증하고 있다. 위치기반 서비스를 제공하기 위해서는 사용자의 위치정보를 관리하는 이동체 데이터베이스가 필수적으로 요구된다. 친구 찾기 서비스와 같은 초기 단계의 LBS 서비스에서는 현재위치만을 가지고 서비스할 수 있지만, 데이터 마이닝이나 CRM등과 같이 연동된 고급 서비스를 제공하기 위해서는 시시각각 변화는 사용자의 현재 위치정보뿐 아니라 과거위치정보를 관리할 수 있어야 한다. 본 논문에서는 이동체 데이터 베이스의 구성요소 중 대용량의 위치정보를 저장 및 검색하기 위한 분산 관리 시스템을 설계하고자 한다. 분산 관리 시스템은 현재위치 관리 컴포넌트와 과거위치 관리 컴포넌트, 분산위치관리 컴포넌트로 구성된다. 현재 위치 관리 컴포넌트와 과거위치 관리 컴포넌트는 공간색인을 제공하므로 데이터 검색의 성능을 향상시키고, 분산위치 관리 컴포넌트는 대용량의 데이터를 다양한 데이터베이스에 분산 저장 및 검색하므로 과부하를 조절하고 대용량의 위치정보를 효율적으로 관리하고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.231-234
• /
• 2001

OBD-II regulations are already effective in many countries. The California Air Resources Board(CARB) first issued regulations in 1985 for the 1988 model year, known as OBD-I, and required the vehicle's engine management computer to warn the driver by means of a dash-mounted light if a malfunction occurred in either the oxygen sensor, the exhaust gas recirculation(EGR) valve or the evaporative emission system purge solenoid, and to store information on troubles that have no recurrent characteristics. This paper presents two methods of wireless monitoring OBD signal, which is one of the ECU output for self diagnostic measurement. RF module is used to monitor ECU's Self diagnostic signal remotely. Two kinds of measurement systems which are based on micro-controller(80C196KC) for portable detection and PC for sever are considered for receiving the RF signal. Therefore, possibility of real-time monitoring of ECU's self diagnostic signal remotely is verified on this paper.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.85-91
• /
• 2017

This paper concerns the design of a matching module system enabling the RF signal to be harmonized between the new base stations (RRH) and the repeater in the same frequency band of the asynchronous transfer network. This matching system controls the RF Gain Control of the module while monitoring the quality of the quality. Additionally, the RF environment has been adapted accordingly to adjust the RF Gain Control to match the receiver characteristics of the relay. As a result of this study, we improved the quality of the interface between the new base stations and existing relays.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.214-216
• /
• 2001

In this paper, we developed the on-line Diagnostic & Monitoring system of distribution transformers using wireless communication. The Diagnostic system consists of the top oil temperature sensing, ambient temperature sensing. load current sensing, acoustic emission peak-value sensing, acoustic emission pulse counter and wireless communication part. The Monitoring system consists of the communication setting, online monitoring and database construction part. The Diagnostic system send the date acquired from the some sensors of the distribution transformers to the host PC. The Monitoring program of the host PC store the data to database. And the Monitoring system estimates the loss of life from the DB. Thus it could be managed the career and the functional lifetime of the transformer more efficiently than existing methodologies.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.16-18
• /
• 2010

유비쿼터스 컴퓨팅 환경에서 다양한 위치 기반 서비스(LBS)를 위해 객체 식별은 필수적인 기술이다. 객체 식별을 위해서 영상 분석 식별, 무선 신호(RF: Radio Frequency) 식별, MIT Cricket 시스템의 RF 신호와 초음파를 활용한 객체 식별 등의 시스템들이 제안되었다. 그 중 가장 널리 이용되는 Cricket 시스템은 RF 신호에 객체의 식별 정보를 포함시켜 초음파 신호와 동시에 송신하고, 수신단에서 RF 신호의 정보를 통해 객체를 식별하는 방식을 이용한다. 하지만 유비쿼터스 컴퓨팅 환경에서 이용되는 단말 노드의 소형의 특성을 유지하기위해 다수의 장치 모듈을 내장하기 힘들다. 본 논문에서는 신호의 정확도가 높은 초음파를 활용하여 RF 통신모듈 없이 신호 중첩 분석으로 통해 다중 객체를 인식하기 위한 기술을 제안한다. 본 논문에서 제안하는 알고리즘의 가능성을 시뮬레이션을 통해 입증하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.86-93
• /
• 2004

This paper presents the remote measurement of the ECU signals adopted with KWP 2000 protocol using the wireless communication technique of bluetooth. The bluetooth technology will be the most promising network paradigm which can open the new area in the information technology. Especially, bluetooth module is able to link all the electrical products and personal computers to cellular phone or PDA. This research has a try to design a wireless measurement model of ECU signal based on the car telemery system using bluetooth device. In order to measure the ECU signals, we designed the interface circuits which is able to communicate between the ECU system and the terminal circuits according to the ISO, SAE regulation of communication protocol standard. A microprocessor S3c341 OX is used for the system control and communication of ECU signals. The embedded system software is programmed to measure the ECU signals using the ARM compiler and ANCI C based on Micro/OS-II kernel to communicate between two bluetooth modules using bluetooth stack. The remote measurement of ECU signals using the bluetooth was designed and implemented to evaluate the performance of wireless network to the transmit measurement data. The possibility for the remote measurement of the self diagnosis signals of ECU adopted with KWP2000 protocol verified through the developed systems and algorithms in embedded system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.5
• /
• pp.442-446
• /
• 2015

As electricity consumption is increasing rapidly these days, an urgent. need exists to minimize consumption through smart and intelligent ways in order to prevent a future energy crisis. For this purpose, development of an intelligent peak power management system should be required. As the number of appliances and consumer electrical devices increase, power consumption in unit business tends to grow. Generally, electricity consumption can be minimized using a peak power management system capable of. effectively controlling the load power by continuously monitoring the power. In this work, a peak power management system which consists of arduino microprocessor equipped with ethernet and Zigbee shield is presented. To verify the feasibility of the proposed scheme, laboratory-scale experiments are carried out.

• Journal of KIISE:Information Networking
• /
• v.32 no.1
• /
• pp.29-33
• /
• 2005

It is not future story that host mobility in wireless network. We already have many devices which can access network among moving our locations. Internet protocol is extended to support not only host mobility but also network mobility. But nesting mobile networks and mobile hosts, there is a problem that routing path of packet becomes complex. By sequential tunneling on outgoing packet at mobile router and toward mobile network at correspondent node, it can be setting up direct path in nested mobile network environment. In this paper, we propose a method for delivering packet through optimized path by sequential tunneling. And evaluate this method by equations and simulations.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.2
• /
• pp.97-104
• /
• 2005

Usually, propagation attenuation of millimeter wave occurs by rainfall, snowfall, temperature, effect of pressure of air. In 60GHz wave band wireless communication network, temperature change becomes big factor of propagation loss department. Also, temperature change causes disturbance of 60GHz frequency at transceiver. In this study, we used 60GHz transceiver and found propagation loss of wireless path and operating frequency disturbance characteristics. In transceiver that there is no temperature compensated device, operating frequency of TX changed by 60.865GHz at temperature of $-5^{\circ}C$, and appeared by 60.730GHz when is $50^{\circ}C$. Therefore, operating frequency change width by temperature change are about 100MHz, greatly. But, in transceiver that there is temperature compensated device, operating frequency of TX changed by 60.830GHz at temperature of $-5^{\circ}C$, and appeared by 60.710GHz when is $50^{\circ}C$. Therefore, operating frequency change width by temperature change are about 20MHz. According to these result, we constructed between buildings examination wireless site for point to point wireless communication using 60GHz band transceivers who have do temperature compensated device, and investigated data transmission characteristics about ambient temperature change. Therefore, if use transceiver that have temperature compensated device, may overcome the wireless transmission error in 60GHz band wireless communication LAN networks despite of ambient temperature change.