• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1708-1721
• /
• 2011

Recent outbreak of cattle diseases such as foot-and-mouth disease(FMD) requires constant monitoring of burial sites of mass cull of cattles. However, current monitoring system takes environmental samples from burial sites with period of between one and two weeks, which makes it impossible for non-stop management of hazardous bio-waste. Therefore, in this study, we suggest an improved real-time environmental monitoring system for such bio-hazardous sites based on wireless sensor networks, which makes constant surveillance of the FMD burial sites possible. The system consists mainly several wireless environmental monitoring sensors(i.e dust, Co2, VOC, NH3, H2S, temperature, humidity) nodes and GPS location tracking nodes. Through analysis of the relayed of the environmental monitoring data via gateway, the system makes it possible for constant monitoring and quick response for emergency situation of the burial sites. In order to test the effectiveness of the system, we have installed a set of sensor to gas outlets of the burial sites, then collected and analyzed measured bio-sensing data. We have conducted simulated emergency test runs and was able to detect and monitor the foul smell constantly. With our study, we confirm that the preventive measures and quick response of bio environmental accident are possible with the help of a real-time environmental monitoring system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9B
• /
• pp.876-882
• /
• 2009

In this paper, we propose a sub-cell coverage control algorithm for enhancement of the cell throughput in OFDMA based relay systems. Relay station (RS) is exploited for improved quality of the received signal in cellular communication systems, especially in shadow areas. However, since a RS requires additional radio resource consumption for the link between the base station (BS) and the RS, we have to carefully control the coverage areas if a mobile station (MS) is serviced via the BS or the RS considering the cell throughput. We consider radio resource reuse as well for the sub-cell coverage configuration by applying various reuse patterns between RSs. We also consider a time varying system by adaptively changing the threshold for coverage depending on the MSs' traffic in the cell. We initially determine the sub-cell coverage of the system depending on the ratio of received signal-interference-noise-ratio (SINR) of the MS from the BS and RSs, respectively. Then, the "sub-cell coverage threshold" varies based on the "effective transmitted bits per sub-channel" with time. Simulation result shows that the proposed "time varying coverage control algorithm" leads to throughput improvement compared to the fixed sub-cell coverage configuration.

• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.241-247
• /
• 2016

As a domestic traffic control signal system, either the system with which a traffic signal turns into green at regular intervals or the system with which an amber or a red signal flickers on local roads without heavy traffic at midnight has been utilized. However, when the former system is used for roads with light traffic at midnight, delays and congestion can be incurred. Besides, in case of the latter signal system, the risk of vehicle crash is high. This study proposes a response type of flickering green signal system that rearranges signal system after analyzing beacon messages including sensor data. The proposed system, on a trunk road or a branch road at midnight, makes the signal keep flickering in green; When a vehicle enters the range of RSE, the transfer coverage, it transmits beacon messages regularly and Agent System analyzes the messages and alters the signal. It is a system by which vehicles move following the altered signal system, which will not only ensure smooth flow but also prevent vehicles from crashing on a road with light traffic. As a result of a simulation, traffic throughput and the average waiting time displayed 10 to 30 percent better improvement than existing signal systems, in terms of performance.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.55-63
• /
• 2020

The IoT technology is a field that applies and converges the technologies in the existing industrial environment, instead of new technologies. The IoT technology is releasing various application services converged with other industries such as smart home, healthcare, construction, and automobile, and it is also possible to secure the work efficiency and convenience of users of IoT-based technologies. However, the security threats occurring in the IoT-based technology environment are succeeding to the vulnerability of the existing wireless network environment. And the occurrence of new and variant attacks in the combination with the ICT convergence environment, is causing damages. Thus, in the IoT technology-based environment, it would be necessary to have researches on the safe transmission of messages in the communication environment between user and device, and device and device. This thesis aims to design a safe communication protocol in the IoT-based technology environment. Regarding the suggested communication protocol, this thesis performed the safety analysis on the attack techniques occurring in the IoT technology-based environment. And through the performance evaluation of the existing PKI-based certificate issuance system and the suggested communication protocol, this thesis verified the high efficiency(about 23%) of communication procedure. Also, this thesis verified the reduced figure(about 65%) of the issued quantity of certificate compared to the existing issuance system and the certificate management technique.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.121-133
• /
• 2013

Defect-free transfer service on the Next-generation wireless network extensive roaming mobile node (MN) to provide efficient mobility management has become very important. MIPv6(Mobility IPv6) is one of mobility management scheme proposed by IETF(Internet Engineering Task Force), and IPv6-based mobility management techniques have been developed in various forms. One of each management techniques, IPv6-based mobility management techniques for PMIPv6 (MIPv6) system to improve the performance of a variety of F-PMIPv6 (Fast Handover for Proxy MIPv6) is proposed. However, the F-PMIPv6 is cannot be excellent than PMIPv6 in all scenarios. Therefor, to select a proper mobility management scheme between PMIPv6 and F-PMIPv6 becomes an interesting issue, for its potenrials in enhancing the capacity and scalability of the system. In this paper, we develop an analytical model to analyze the applicability of PMIPv6 and F-PMIPv6. Based on this model, we design an Secure Smart Mobility Support(SSM) scheme that selects the better alternative between PMIPv6 and F-PMIPv6 for a user according to its changing mobility and service characteristics. When F-PMIPv6 is adopted, SSM chooses the best mobility anchor point and regional size to optimize the system performance. Numerical results illustrate the impact of some key parameters on the applicability of PMIPv6 and F-PMIPv6. Finally, SSM has proven even better result than PMIPv6 and F-PMIPv6.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.79-85
• /
• 2016

Recently, visible light communication(VLC) is being actively researched as green wireless communication services are drawing attention. Currently, VLC mostly uses LED for transmission and PD(Photo Diode) for receiving. However, this kind of system has limited applications. Therefore, we design and propose in this paper, a LED-to-LED two way VLC system that doesn't use PD(Photo Diode). This system has the following features and contributions. First, this system uses just LED at both transmitter and receiver with analog switch, Second, this system support both one-way communication and two way communication together. One way communication can support multi-hop communication. The performance evaluation of the proposed system is conducted at a place with standard light. We test the success or failure of one way communication by changing distance and baud rate while test the success and failure of two way communication by changing distance. We expect that the proposed LED-to-LED system in this paper can be applied for various application fields.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.138-145
• /
• 2007

Wireless transmission system using the multipath channel is affected ISI due to the delay spread. So we use a decision feedback equalizer which consist of decision part and feedback filter for remove the ISI effectively. In this paper, we propose a improved adaptive decision feedback equalizer to mitigate ISI effectively. The proposed adaptive decision feedback equalizer is construct by using soft decision device and hierarchical feedback filter based on MMSE sub-optimal equalizer using the LMS algorithm. Soft decision device mitigate the error propagation in feedback filter by incorrectly detected decision symbol and feedback filter which is divided two step independently mitigate the ISI by using a adaptive algorithm. As a result this structure shows better performance than conventional decision feedback equalizer by mitigating the error propagation in filter cause incorrectly detecting symbol. and we get the MSE more rapidly by using larger step-size due to reduce the number of feedback filter tap. In computer simulation, we compare the bit error rate performance of proposed decision feedback equalizer with conventional one on the S-V channel model for UWB system.

• The KIPS Transactions:PartC
• /
• v.13C no.3 s.106
• /
• pp.339-344
• /
• 2006

Secure delivery of multicast data can be achieved with the use of a group key for data encryption in mobile ad hoc network (MANET) applications based on the group communication. However, for the support of dynamic group membership, the group key has to be updated for each member joining/leaving and, consequently, a mechanism distributing an updated group key to members is required. The two major categories of the group key distribution mechanisms proposed for wired networks are the naive and the tree-based approaches. The naive approach is based on unicast, so it is not appropriate for large group communication environment. On the other hand, the tree-based approach is scalable in terms of the group size, but requires the reliable multicast mechanism for the group key distribution. In the sense that the reliable multicast mechanism requires a large amount of computing resources from mobile nodes, the tree-based approach is not desirable for the small-sized MANET environment. Therefore, in this paper, we propose a new key distribution protocol, called the proxy-based key management protocol (PROMPT), which is based on the naive approach in the small-sized MANET environment. PROMPT reduces the message overhead of the naive through the first-hop grouping from a source node and the last-hop grouping from proxy nodes using the characteristics of a wireless channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.107-114
• /
• 2008

In wireless access systems, there has been much interest in enhancing the performance of orthogonal frequency division multiplexing OFDM) in a frequency selective fading channel. If the channel is static and is perfectly known to both the transmitter and the receiver, the water-filling technique with adaptive modulation is known to be optimal. However, for OFDM systems, this requires intensive traffic overheads for reporting channel side information on all subcarriers to the transmitter In this paper, we propose an adaptive modulation and coding scheme for bit-interleaved coded OFDM (BIC-OFDM) for downlink packet transmissions with reduced feedback information. To minimize the feedback information, we employ a rate adaptation method based on the OFDM symbol rather than on each subcarrier. To illustrate the performance gap between the optimal water-filling and the proposed scheme, we will compare cutoff rates for both schemes. It is shown that the loss is less than 2dB while the proposed scheme significantly reduces the feedback payloads. Also, the OFDM system in multiuser environment with subcarrier grouping is considered. It is shown that by exploiting multiuser diversity the throughput of the proposed scheme approaches the channel outage capacity as the number of users and the number of subcarrier groups increase.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1A
• /
• pp.33-43
• /
• 2010

Recently, users want to use real-time multimedia services, such as internet, VoIP, etc., using their IEEE 802.11 wireless lan mobile stations. In order to provide such services, a handoff among access points is essential to support the mobility of a node, in such an wide area. However, the legacy handoff methods of IEEE 802.11 technology are easy to lose connections. Also, the recognition of a disconnection and channel re-searching time make the major delay of the next AP to connect. In addition, because IEEE 802.11 decides the selection of an AP depending only on received signal strength, regardless of a node direction, position, etc., it cannot guarantee a stable bandwidth for communication. Therefore, in order to provide a real-time multimedia service, a node must reduce the disconnection time and needs an appropriate algorithm to support a sufficient communication bandwidth. In this paper, we suggest an algorithm which predicts a handoff point of a moving node by using GPS location information, and guarantees a high transmission bandwidth according to the signal strength and the distance. We implemented the suggested algorithm, and confirmed the superiority of our algorithm by reducing around 3.7ms of the layer-2 disconnection time, and guaranteed 24.8% of the communication bandwidth.