• Annual Conference of KIPS
• /
• 2015.04a
• /
• pp.64-66
• /
• 2015

본 논문에서는 감시카메라의 에너지 효율성과 영상 감시의 효율성을 높이기 위해서 이벤트 기반으로 작동하는 저에너지 DIY (Do-It-Yourself)감시 카메라 시스템을 제안한다. 본 논문에서 제안하는 감시 카메라는 이벤트 감지 모드에서는 저전력 경량압축 모드로 작동하다가 움직임이 검출된 경우에만 고압축/고해상도 모드로 자동 전환되어 이벤트 발생시점 이후뿐만 아니라 이벤트 발생 3초 전의 영상까지 압축하여 무선으로 서버로 전송한다. 또한, 서버에 저장된 영상은 사후에 추출할 수 있을 뿐 아니라 실시간으로 원격 단말로 스트리밍이 가능하여 원격지에서 이벤트 발생을 보고 받고 필요시에 실시간으로 모니터링 할 수 있도록 시스템을 구성하여 실용성을 강화하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.193-195
• /
• 2009

Bluetooth is a popluar wireless data transmission method with low power consumption. In this paper, we present a open source based player of video stream encoded by H.264 codec, which is transmitted via Bluetooth. An open source JM is used for H.264 decoding and modified for reading H.264 encoded data via Bluetooth. For display of decoded video data, SDL was utilized.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.357-358
• /
• 2019

본 논문에서는 조도센서와 마이크로웨이브센서 기반의 협력제어를 통하여 기존대비 35%P 전력절감이 가능한 에너지 절감형 스마트 LED 조명시스템에 대하여 기술하였다. 제안된 시스템은 센서모듈과 LED조명, 무선전송 모듈이 분리된 형태로 인지기반 조명 제어를 통하여 ESCO 사업에 적합한 에너지 절감형 융합 조명 시스템에 다양하게 활용될 수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.774-776
• /
• 2014

노령층의 증가로 인하여 독거 노인층이 점점 증가하고 있다. 독거 노인은 외부의 침입이나 갑작스런 건강상의 문제로 위험에 처해질 가능성이 매우 높다. 따라서 독거 노인의 의료복지에 대한 관심이 날로 증가하고 있다. 본 연구에서는 독거 노인의 의료 복지에 적용할 수 있는 활동량 모니터링 시스템을 개발하였다. 이 시스템은 저 전력으로 동작하는 지그비 임베드 네트워크와 DTMF(Dual Tone Multi Frequency) 전화 시스템으로 구성되어, U-Health 케어 개념으로 활동량과 혈압 등의 인체 정보를 일상 생활 속에서 병원 및 보호자에게 전송할 수 있다. 또한 본 연구 결과는 미래의 독거 노인 원격진료 시스템에 적용될 수 있다.

• Annual Conference of KIPS
• /
• 2024.10a
• /
• pp.307-308
• /
• 2024

BLE 기술은 저전력과 효율적인 데이터 전송을 제공하지만, 통신 프로토콜의 결함을 악용한 키스트로크 주입 공격과 같은 보안 위협이 존재한다. 본 논문에서는 리눅스 커널의 BlueZ 패키지에서 발생한 CVE-2023-45866 취약점을 중심으로, 해당 공격의 원리와 심각성, 그리고 이를 해결하기 위한 패치를 분석한다. BLE 네트워크의 보안을 강화하기 위해서는 지속적인 연구와 대응이 필요하며, 보안 위협에 대한 대응 방안을 개발하고, 사용자의 보안 의식을 높이는 교육이 필수적임을 강조한다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.129-136
• /
• 2012

Temperature of fresh concrete can be effectively used to predict the strength of concrete being cured and make an informed decision for stripping the molds. A hygrothermograph and thermo-couple sensors that require an extensive wiring have been applied to measure a temperature of concrete at the early stage of the curing process on site. However, these methods have limits to provide the temperature data in real time due to harsh working environment including frequent cutting of wires. Therefore, this study is aiming at developing a device based on wireless sensor network to measure the temperature of concrete being cured in formwork. The result showed that the wireless sensor with probe type thermistor which is developed had the same temperature data compared to the existed wire type thermistor, and we confirmed the temperature history of concrete in real time for 28 days throughout the gateway by wireless network that collects the temperature data measured from specimens in laboratory. Also, the network device for transmission can be easily separated from the probe sensor part and reused consistently. If the wireless sensor network device developed uses in the field, the temperature management of concrete will be systematically conducted from at the early stage of the curing, and especially be effective for cold weather concrete construction. In addition, it will contribute to the establishment of advanced quality control system for concrete and productivity of supervisors on site will be increased in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2337-2342
• /
• 2010

There is a vast field of application for RFID(Radio Frequency IDentification) technology. In the case of hospitals, RFID can be used for organizing patient data. Generally, patient data has been handled with medical cards. In order to look up data about a patient, the medical card would have to be found first, within a lot of other medical cards, by hand or with a computer. This is a very inconvenient system. Also, if the card is searched by the name of the patient, fatal medical accidents may occur in cases of mix-ups. If remote RFID Tag monitoring systems are applied in this case, the patient data would be accessible in the hospital. This article will discuss the grafting of RFID systems and wireless data communicating technology. The EM4095 chip, which uses 125KHz carrier waves was used in this study. And a Bluetooth module was added for wireless data communication. The ATMEGA128 microcomputer was used to control the RFID system and wireless module. A LCD monitor was connected to the extension port for nurses to view patient data, and also, the same information was displayed on PC monitors for doctors to see. The circuit was designed to consume minimal amounts of electricity for portability, and to transmit Tag ID's in environments with a lot of noise. The article is concluded with a diagram of the whole system, and performance of each data transmitting section has been analyzed.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.27 no.1
• /
• pp.1-6
• /
• 2017

Recent researches on radio frequency energy harvesting networks(RF-EHNs) with limited energy resource like battery have been focusing on the development of a new scheme that can effectively extend the whole lifetime of a network to semipermanent. In order for considerable increase both in the amount of energy obtained from radio frequency energy harvesting and its charging effectiveness, it is very important to design a network that supports energy harvesting and data transfer simultaneously with the full consideration of various characteristics affecting the performance of a RF-EHN. In this paper, we proposes an interference-based charging aware routing protocol(ICARP) that utilizes interference information and charging time to maximize the amount of energy harvesting and to minimize the end-to-end delay from a source to the given destination node. To accomplish the research objectives, this paper gives a design of ICARP adopting new network metrics such as interference information and charging time to minimize end-to-end delay in energy harvesting wireless networks. The proposed method enables a RF-EHN to reduce the number of packet losses and retransmissions significantly for better energy consumption. Finally, simulation results show that the network performance in the aspects of packet transmission rate and end-to-end delay has enhanced with the comparison of existing routing protocols.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.1
• /
• pp.13-18
• /
• 2014

Sensor nodes are used for monitoring and collecting the environmental data via wireless sensor network. The wireless sensor network with various sensor nodes draws attention as a key technology in ubiquitous computing. Sensor nodes has very small memory capacity and limited power resource. Thus, it is essential to have energy efficient strategy for the sensor nodes. Since the sensor nodes are operating on the same frequency bands with ISM frequency bands, the interference by the devices operating on the ISM band degrades the quality of communication integrity. In this paper, the convolutional code is proposed instead of ARQ for the error control for the sensor network. The proposed convolutional code was implemented and the BER performance is measured. For the fixed transmitting powers of -19.2 dBm and -25dBm, the BER with various communication distances are measured. The packet loss rate and the retransmission rate are calculated from the measured BER. It is shown that the porposed method obtained about 9~12% and 12-19% reduction in retransmission rate for -19.2 dBm and -25 dBm respectively.

• Journal of Korea Multimedia Society
• /
• v.15 no.5
• /
• pp.587-594
• /
• 2012

IEEE 802.15.6 standard technology is proposed for low-power wireless communication in, on and around body, where vital signs such as pulse, blood pressure, ECG, and EEG signals are transmitted as a type of data packet. Especially, these vital signs should be delivered in real time, so that the latency from slave node to hub node can be one of the pivotal performance requirements. However, in the case of IEEE 802.15.6 technology data retransmission caused by transmission failure can be done in the next superframe. In order to overcome this limitation, we propose an adaptive polling algorithm for IEEE 802.15.6 technology. The proposing algorithm makes the hub to look for an appropriate time period in order to make data retransmission within the superframe. Through the performance evaluation, the proposing algorithm achieves a 61% and a 73% latency reduction compared to those of IEEE 802.15.6 technology in the environment of 70% traffic offered load with 10ms and 100ms superframe period. In addition, the proposing algorithm prevents bursty traffic transmission condition caused by mixing retransmission traffic with the traffic reserved for transmission. Through the proposing adaptive polling algorithm, it will be possible to transmit time-sensitive vital signs without severe traffic delay.