• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.6
• /
• pp.111-117
• /
• 2009

In the wideband code division access (WCDMA) systems, a pilot channel is used to determine WCDMA network coverage, cell identification, synchronization, timing acquisition and tracking, user-set handoff, channel estimation, and so on. A wireless repeater, which is deployed in the urban area for the WCDMA system to meet the growing demand on wireless communication services, has the possibility to receive several pilot signals from a large number of base stations, however, cannot distinguish its service base station's signal among them. This pilot interference results in frequent handoffs in the user equipment, which degrades the radio reception, transmission efficiency, quality of service, and channel capacity and increases the unwanted power consumption. In this paper, thus, we propose a pilot pollution interference cancellation scheme using one of the adaptive estimation algorithms, normalized least mean square (NLMS), which is applicable to a wireless repeater. We carried out link-level and network-level computer simulations to evaluate the performance of the proposed scheme in a wireless repeater. The simulation results verify the bit error rate (BER) improvement in the link level and the call drop probability improvement in the network level.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.06a
• /
• pp.256-260
• /
• 2001

본 논문은 광대역 무선통신환경에서 3GPP(3rd Generation Partnership Project)에 기반한 비동기 IMT-2000 시스템의 송수신 시스템을 구성하여 기지국의 수신성능을 분석하였다. 이동국과 기지국간의 Uplink 채널 환경을 고려하였으며, 기지국의 수신신호는 다중경로 페이딩(Multi-path Fading)과 다중접속간섭(Mult Access Interference : MAI)의 영향으로 성능일 열화된다. 이에 대한 대책으로 Array 안테나를 채용하였을 경우와 MRC-Diversity(Maximal Combining Diversity)를 채용하였을 경우의 수신성능을 동일한 환경에서 비교 분석하였으며, 각각의 시스템에 간섭제거기를 직렬로 비교분석하였다. 본 논문에서 적용한 Array 안테나는 수신 신호의 방향에 따라 적응적으로 추적하여 수신 SNR(Singnal-to-Noise power Ratio)을 최대로 형성하여 시스템의 성능을 개선하는 기법이며, 안테나의 방향성(Directivity :D=2.67)을 이용하는 3-element Array 안테나를 채용하였다. 최대비 합성 다이버시티 기법은 다이버시티 기법 중 수신효율이 가장 좋으며 가지수(L=2)를 함수를 사용하였다. 성능분석 결과 다중경로 페이딩과 다중접속간섭 환경에서 최대비 합성 다이버시티 기법이 Array 안테나보다 수신효율이 우수하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.191-196
• /
• 2001

본 논문은 광대역 무선통신환경에서 3GCPP(3.4 Generation Partnership proiect)에 기반한 비동기 IMT-2000 시스템의 송수신 시스템을 구성하여 기지국의 수신성능을 분석하였다. 적용된 시스템은 이동국과 기지국간의 Uplink 채널 환경을 고려하였으며, 기지국의 수신신호는 다중경로 페이딩(Multi-path Fading)과 다중접속간섭(Mult Access Interference : MAI)의 영향으로 성능이 열화되며 이에 대한 대책으로 Array 안테나를 채용하였을 경우와 MRC-Diversity(Maximal Combing Diversity)를 채용하였을 경우의 수신성능을 동일한 환경에서 비교 분석하였다. 본 논문에서 적용한 Array 안테나는 수신 신호의 방향에 파라 적응적으로 추적하여 수신 SNR(Singnal-to-Noise power Ratio)을 최대로 형성하여 시스템의 성능을 개선하는 기법이며, 안테나의 방향성(Directivity : =2.67을 이용하는 3-element Array 안테나를 채용하였다. 최대비 합성 다이버시티 기법은 다이버시티 기법 중 수신효율이 가장 좋으며 가지수(L=2)를 함수로 사용하였다. 성능분석 결과 다중경로 페이딩과 다중접속간섭 환경에서 최대비 합성 다이버시티 기법이 Array 안테나보다 약 Eb/No=4[dB]정도 수신효율이 우수하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.12 s.354
• /
• pp.61-67
• /
• 2006

This paper proposes the algorithm for tracking of the residual phase errors incurred by carrier frequency offset and sampling frequency offset in the orthogonal frequency division multiplexing (OFDM) systems which are suitable for high data rate wireless communications. In the OFDM systems the subcarriers which are orthogonal to each other are modulated by digital data and transmitted simultaneously. The carrier frequency offset causes degradation of signal to noise ratio(SNR) performance and interference between the adjacent subcarriers. The errors in the sampling timing caused by the sampling frequency difference between the transmitter and the receiver sides also cause a major performance degradation in the OFDM systems. The residual error tracking and compensation mechanism is essential in the OFDM system since the carrier and the sampling frequency offset cause the loss of orthogonality resulting in the system performance loss. This paper proposes the scheme where the channel gain and the payload data information are reflected in the residual error tracking process which results in the reduction of the estimation error and the tracking performance improvements under the frequency selective fading wireless channels.

• The Journal of the Korea Contents Association
• /
• v.15 no.2
• /
• pp.11-20
• /
• 2015

In this paper, we develop an intelligent mobile surveillance system based on binary CDMA for the unmanned automatic tracking and surveillance. That is, we implement a intelligent surveillance system using the binary CDMA wireless communication technology which is applied the merit of CDMA and TDMA on it complexly. This system is able to monitor the site of the accident on network in real time and process the various situations by implementing the security surveillance system. This system pursues an object by the 360-degree using camera, expands image using a PTZ(Pan/Tilt/Zoom) camera zooming function, identifies the mobile objects image within a screen and transfers the identified image to the remote site. Finally, we show the efficiency of the implemented system through the simulation of the controlled situations, such as tracking coverage on objects, object expansion, object detection number, monitoring the remote transferred image, number of frame per second by the image output signal etc..

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.9
• /
• pp.1060-1068
• /
• 2016

The range-free localization using connectivity information has problems of mobile tracking. This paper proposes two Bayesian filter-based mobile tracking algorithms considering a propagation scenario. Kalman and Markov Chain Monte Carlo (MCMC) particle filters are applied according to linearity of two measurement models. Measurement models of the Kalman and MCMC particle filter-based algorithms respectively are defined as connectivity between mobiles, information fusion of connectivity information and received signal strength (RSS) from neighbors within one-hop. To perform the accurate simulation, we consider a real indoor map of shopping mall and degree of radio irregularity (DOI) model. According to obstacles between mobiles, we assume two types of DOIs. We show the superiority of the proposed algorithm over existing range-free algorithms through MATLAB simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10A
• /
• pp.1512-1520
• /
• 2000

The wireless communication network is evolving toward IMT-2000 for providing various multimedia services. In order to accomplish this ultimate goal the effective schemes are required which can dynamically utilize the limited wireless resources based on different traffic characteristics of various services. This paper proposes a novel bandwidth allocation and call admission control scheme to transmit multimedia traffic based on the bandwidth reservation procedure using direction estimation in the IMT-2000 This scheme estimates the position of mobiles based on the mliticriteria decision making in which uncertain parameters such as RSS(Received Signal Strength), the distance between mobile and base station the moving direction and the previous location are participated in the decision process using aggregation function in fuzzy set theory. Its effectiveness is investigated by simulation.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.1143-1151
• /
• 2019

In this paper, we propose a wireless transmission scheme that maximizes transmission efficiency per frequency bandwidth in a single carrier modulation scheme. The proposed scheme employs a decision directed channel tracking technique to remove both pilot signal and the guard interval signal between symbols in frames. It performs a raised cosine pulse shaping function with an roll-off factor of 0.05. In addition, 2×2 multiple input and multiple output using two polarized antennas is applied and both equalization and signal separation are performed in the frequency domain. The wireless modem with this technology confirms that the transmission speed of up to 63.3Mbps is achieved under the 5MHz frequency bandwidth

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.473-476
• /
• 2007

Location determination of mobile user via RSSI approach has received ample attention from researchers lately. However, it remains a challenging issue due to the complexities of RSSI signal propagation characteristics, which are easily exacerbated by the mobility of user. Hence, a segmentation-based linear spline interpolation method is proposed to cater for the dynamic fluctuation pattern of radio signal in complex environment. This optimization algorithm is proposed in addition to the current radiolocation's (CC2431, Chipcon, Norway) algorithm, which runs on IEEE802.15.4 standard. The enhancement algorithm involves four phases. First phase consists of calibration model in which RSSI values at different static locations are collected and processed to obtain the mean and standard deviation value for the predefined distance. RSSI smoothing algorithm is proposed to minimize the dynamic fluctuation of radio signal received from each reference node when the user is moving. Distances are computed using the segmentation formula obtain in the first phase. In situation where RSSI value falls in more than one segment, the ambiguity of distance is solved by probability approach. The distance probability distribution function(pdf) for each distances are computed and distance with the highest pdf at a particular RSSI is the estimated distance. Finally, with the distances obtained from each reference node, an iterative trilateration algorithm is used for position estimation. Experiment results obtained position the proposed algorithm as a viable alternative for location tracking.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.627-633
• /
• 2020

Assembly process data can be gathered in real time in a manufacturing execution system (MES) server using proximity sensors, barcodes, RFID, ZigBee, Bluetooth, wireless sensor networks, etc. Although this is suitable for identifying process flow and checking production progress, it is difficult to trace the location of individual workers in real time for missing work or trajectories within the work area. To overcome this, the location and trajectory of the working tool can be analyzed in real time through a position tracking system of an operator's working tool. It can instruct the operator to perform a consistent working process. Productivity and quality improvement can be achieved by an alarming or blocking operator with possible assembly defects during the assembly process in real time. To this end, we developed a real-time tool position-tracking sensor system based on Ultra Wide Band (UWB) trilateration using a Kalman filter to eliminate mechanical vibration and radio communication noise.