• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12A
• /
• pp.982-990
• /
• 2009

The IEEE 802.15.4 wireless sensor network is composed of the unique sensor devices to monitor and collect physical or environmental conditions. The interests in a positioning technology, which is one of the environment monitoring technologies, are gradually increased according to the development of the sensor technology and IT infrastructure. Generally, it is difficult for the positioning system using RSSI (Received Signal Strength Indication) based implementation to get accurate position because of obstacles, RF wave's delay and multipath. Therefore, in this paper, we investigate the improved positioning technologies for RSSI-based positioning system. This paper also proposes the enhanced scheme to improve the accuracy of positioning system by applying the Gaussian Filter algorithm, which is widely used for enhancing the performance of image processing system. For the implementation of proposed scheme, we firstly make a look-up tables, which represent the distance between target node and master node and corresponding RSSI value of each target node which are recorded as an average value after investigating the characteristics of attenuation of transmitted signal By applying the pre-determined look-up tables and Gaussian Filtering in the proposed scheme, we analyzed the positioning performance and compared with other conventional RSSI-based positioning algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2411-2418
• /
• 2011

The most typically utilized positioning method in the existing indoor WPS that is a positioning method utilizing distributed wireless network is the finger print. Its positioning is carried out by calculating the difference between the AP information map and WiFi AP signal collected. However, there are problems like low accuracy and high cost when the existing method and the radio map formation are applied to outdoors. In this paper, the characteristics of the existing WPS are surveyed and their problems are examined. In addition, we propose a new WPS using weak signal and a method to construct radio map in order to solve the above problems. And then, the results of experimental test will be analyzed.

• The KIPS Transactions:PartC
• /
• v.12C no.5 s.101
• /
• pp.701-708
• /
• 2005

The mobility prediction algorithm and the channel reservation scheme have been reported as an effective means to provide QoS guarantees and the efficient resource reservation in wireless networks. Among these prediction algorithms, the recently proposed Detailed-ZMHB algorithm makes use of the history of the user's positions within the current cell to predict the next cell, which provides the better prediction accuracy than the others. The handoff prioritizing schemes are proposed to provide improved performance at the expense of an increase in the blocking probability of new calls. In the soft handoff of the CDMA systems, a mobile can communicate via two adjacent cells simultaneously for a while before the actual handoff takes place. In this paper, we propose a new channel reservation scheme making use of the user mobility pattern information in order to reduce the call dropping probability. Our results show that the proposed scheme gives about 67.5-71.1$\%$ lower call dropping probability, compared to the existing scheme.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.56-61
• /
• 2015

In this paper, the 3D positioning of IoT sensors with the Unity engine of android platform based home-hub was proposde for IoT(Internet of Things) users. Especially, the monitoring of IoT sensor and battery status was designed with the clustering of IoT sensor's position. The 3D positioning of RSSI(received signal strength indicator) and angle for new IoT sensor according to clustering method was described with the cooperation of beacon and received arrival signal time. This unity engine based smart hub platform can monitor the working situation of IoT sensors, and apply 3D video with texture for the life-cycling of many IoT sensors simultaneously. rs was described with RSSI(received signal strength indicator) and received angle.

• Journal of IKEEE
• /
• v.13 no.3
• /
• pp.62-71
• /
• 2009

In this study, we developed a wireless CROS(contralateral routing of signal) hearing aid for unilateral impaired people. CROS hearing aid takes sound from an ear with poorer hearing and transmit to another ear with better hearing. Generally, the self-voice delivered through the receiver of CROS hearing aid can be very loud. It is hard to perceive target speech because of loud self-voice. To compensate it, a self-voice suppression algorithm has been developed. we performed SDT(speech discrimination test) for evaluation of the self-voice suppression algorithm. One-syllable words was used as test speech and recorded with self-voice at a 1m distance. As the results, SDT score was improved about 11% when the self-voice suppression algorithm was processed. It is verified that the self-voice suppression algorithm helps speech perception at a time to communicate with others.

• Journal of Internet Computing and Services
• /
• v.11 no.4
• /
• pp.33-39
• /
• 2010

In this paper, a data dissemination protocol that transmits data collected for Wireless Sensor Networks (WSNs) is newly proposed, and the proposed proactive protocol takes into account energy consumption minimized and delay time disseminated. The well-known SPMS (Shortest Path Mined SPIN) forms the shortest path-based routing table obtained by Bellman Ford Algorithm (BFA) and disseminates data using a multi-hop path in order to minimize energy consumption. The mentioned properties of SPMS cause memory burden to create and maintain the routing tables. In addition, whenever BFA is executed, it is necessary to suffer from the energy consumption and traffic occurred. In order to overcome this problem, a proactive dissemination protocol using Residual Energy and Signal Strength, called RESS, is proposed in this paper. Simulation results show that RESS outperforms SPMS up to 84% in terms of the number of traffic messages and the transmitted delay time of RESS is similar to that of SPMS using the shortest path.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.5
• /
• pp.37-43
• /
• 2009

Streaming video service over wireless and mobile communication networks has received significant interests from both academia and industry recently. Specifically, mobile WiMAX (IEEE 802.16e) is capable of providing high data rate and flexible Quality of Service (QoS) mechanisms, supporting mobile streaming very attractive. However, we need to note that streaming videos can be partially deteriorated in their macroblocks and/or slices owing to errors on OFDMA subcarriers, as we consider that compressed video sequence is generally sensitive to the error-prone channel status of the wireless and mobile network. In this paper, we introduce an OFDMA subcarrier-adaptive mobile streaming server based on cross-layer design. This streaming server system is substantially efficient to reduce the deterioration of streaming video transferred on the subcarriers of low power strength without any modifications of the existing schedulers, packet ordering/reassembly, and subcarrier allocation strategies in the base station.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.131-140
• /
• 2013

Due to the limitations of the existing indoor positioning system depending on the radio wave, at present, it is required to introduce a new method in order to improve the accuracy in indoor environment. Recently, bio-inspired technology has become the future core technology. Thus, this study examined the accurate positioning method applying the abilities that animals with homing instinct measure their position by searching geomagnetic field with the use of their biomagnets. In order to confirm the applicability of geomagnetic field, a new source for indoor positioning, this study separated the constituent materials and building structure and designed the structures that can carry the actual magnetic field sensor and the data collection module. Subsequently, this study investigated the applicability of geomagnetic field as a positioning source by establishing the positioning system of Fingerprint method. In performance evaluation of the positioning system, the geomagnetic strength-based positioning system was similar to or approximately 20 percent higher than the wireless LAN-based positioning system in the buildings with the existing wireless LAN. Thus, in the environment without infrastructure for indoor positioning, the geomagnetic, an independent earth resource, can make it possible to realize the indoor positioning.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2685-2690
• /
• 2014

WPS determines position via a two-step process. In the construction phase, a radio map is constituted by collecting radio information signals. Positioning procedure is a step of comparing the radio signal newly acquired with the radio map. If the signals collected and the radio map are different the accuracy decreases. Even though the rate of accuracy is different according to positioning algorithms, accuracy drop is an issue common to all WPS systems. Signal strength fluctuation is caused by the malfunction of the device that receives positioning signals, obstruction and channel interference, etc. In this paper, in order to solve the problem caused by signal strength change, we propose a new radio map construction technique. The proposed method is intended to constitute a strong radio map to changes in the signal strength and updated by collecting the signal strength changes to the radio map. The use of this method is expected to enhance the accuracy of WPS by actively counteracting signal fluctuation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1665-1671
• /
• 2007

Mobile Ad hoc Networks (MANETs) refer to autonomous networks in which wireless data communications are established between multiple nodes in a given coverage area without a base station or centralized administration. Because of node mobility and limited battery life, the network topology may changes frequently. Selecting the most reliable path during route discovery process is important to improve performance in ad-hoc networks. In this study, we proposed an enhanced routing protocol based on AODV by monitoring variation of receiving signal strength. New metric function that consists of node mobility and hops of path is used for routing decision. From extensive experiments by using NS-2, The performance of the proposed routing scheme has been imp개ved by comparison to AODV protocol.