• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8A
• /
• pp.820-827
• /
• 2010

In these days, video applications for special purposes such as video conference systems among multiple users and video surveillance systems require multiple video connections and QoS guarantee. The video systems employ IEEE 802.11 Wireless LAN devices to support broadband wireless interfaces and easy internet accesses for cheaper prices. However, according to the current IEEE 802.11e HCCA standard, if more than three video sessions are established in WSTA services, some of them must share the TXOP because the available number of TSIDs for video transmission is two. In order to resolve the problem, we devised a method which can establish up to 15 video sessions by slightly modifying the frame structure while maintaining the compatibility with current standard. Our method is implemented on the NCTUns 4.0 network simulator, and evaluated not only numerically in terms of throughput, delay, and PSNR, but also experimentally in the sense of real video clips that are used as input to our simulation. The results showed that our method sufficiently guarantees the transmission bandwidth requested by each video session.

• Journal of Digital Contents Society
• /
• v.18 no.2
• /
• pp.365-371
• /
• 2017

IEEE 802.11 Wireless Local Area Network (WLAN) adopts Power Saving Mode(PSM) to save the power. Unlike existing PSM, this paper proposes a new scheme for the power saving of the Mobile Host(MH) when a MH performs the data transmission after the competition-based DCF(Distributed Coordination Function) and competition free-based PCF(Point Coordination Function). In this paper, The proposed scheme estimates the distance between the MH with the authority of data transmission and the Access Point(AP) and then adaptively controls the power of the MH considering the distance. Through the simulation result, we find that the proposed scheme consumes the smaller transmission power and has the similar success rate of packet transmission when it is compared to the existing scheme which uses the same power without the consideration of the distance.

• KIISE Transactions on Computing Practices
• /
• v.22 no.8
• /
• pp.381-386
• /
• 2016

Recently full-duplex communication in wireless networks is enabled by the advancement of self-interference cancellation technology. Full-duplex radio is a promising technology for next-generation wireless local area networks (WLAN) because it can simultaneously transmit and receive signals within the same frequency band. Since legacy medium access control (MAC) protocols are designed based on half-duplex communication, they are not suitable for full-duplex communication. In this paper, we discuss considerations of full-duplex communication and propose a novel full-duplex MAC protocol. We conducted a simulation to measure the throughput of our MAC protocol. Through the simulation results, we can verify that significant throughput gains of the proposed full-duplex MAC protocol, thus comparing the basic full-duplex MAC protocol.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.915-920
• /
• 2015

Recently, many companies try to offer various services using drones. Especially, the drone delivery system is a good example. However, the drone delivery service has some problems since the heavy parcels flies over the people walking down streets, so many things must be considered such as dropping mails by collision of drones. To resolve the problem, in this paper, a inter-drone network communication will be used to design the topology and to simulate in the Opnet simulator for the performance evaluation. Additionally, the topology with random mobility of trajectory of drones is also designed and simulated for the result.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.222-225
• /
• 2003

IP-based mobility management is a core technology in the next generation network environment. MIPv6 is introduced to support for mobility in global network, and HMIPv6 is being considered as a local mobility management protocol to reduce signaling overhead for mobility management in the global network. Also, the paging technology is introduced to IP-based network to reduce signaling overhead and power consumption for mobility management. In this paper, we propose P-HMIPv6 which enables IP paging service in HMIPv6 to reduce signaling overhead for local mobility management in MAP domain of HMIPv6.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.873-877
• /
• 2008

There were many exposed problems in previous authentication method on LAN. Especially Open System Authentication Method, Shared Key Method, Mac Based Authentication Method are very hard to use in wireless network that needs security. So now, many researches have been performed about $802.1{\times}$ and user authentication method applying PKI. But certificate verification protocol has been used abolished list called CRL since it's first usage of PKI, there were still has a problem about distribution point. In this paper, I applied CVS to use CA direct not to use CRL and OSCP server in order to improve this problems.

• Journal of Korea Multimedia Society
• /
• v.10 no.1
• /
• pp.66-73
• /
• 2007

SDR technology is a fundamental wireless access technology that combines and accommodates multiple wireless communication standards in one transceiver system through just modifying software using modular communication platforms without any hardware modifications for RF and IF signal processing on the basis of high performance DSP devices. Various communication systems that are designed under diverse and complex network environments require the communication platforms on the basis of SDR supporting reorganization to guarantee simple and fast communication interfaces among the respective wireless networks. This paper introduces a main idea on the implementation of platform on the basis of SDR and a communication platform is designed for experiments that is composed of a DSP board with TMS320C6713 CPU, a FPGA board processing IF signals, and a module with RF transceiver processing wireless LAN frequency bandwidth. Various modulation schemes(BPSK, QPSK, and 16QAM) used in communication systems are applied and tested on the designed platform and the test results shows that it is possible to design a reconfigurable communication terminal platform.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.333-338
• /
• 2019

Cultural contents are the most important factor in high speed and high quality data communication. High-quality content includes VR and AR technology, and a variety of high-quality content can be streamed over wireless mobile phones via smartphones. In addition, network and wired/wireless communication are inevitably required in an Internet of Things (IoT) environment in which things are connected to a wireless Internet. IoT is used in various network technologies such as 4G, 5G mobile communication, WIFI wireless LAN, Bluetooth and so on. It is a technology that can use the connection between things anytime, anywhere, and can be achieved in a wireless mobile communication environment. Therefore, in this paper, we study data error compensation estimation method which can reduce data error based on mobile communication channel environment analysis so that high quality contents can be serviced even in high speed mobile environment.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.685-687
• /
• 2004

본 논문에서는 이동 인터넷 환경에서 핸드오프 시, 링크 계층 (L2) 정보를 이용하며 새로 발견한 모바일 에이전트와의 등록 절차를 L2 핸드오프 완료 후 곧바로 수행하는 로우-레이턴시 (Low-Latency) 핸드오프 방안을 제안하고 이를 구현한다. 제안한 방법은 기존 연구들에 비해 추가적인 L2 핸드오프 지연 및 별도 네트워크 구성요소를 필요로 하지 않으며 보다 일반적이고 현실적인 네트워크 환경에서 적용될 수 있는 방안이다. 실험 결과는 제안된 방법이 인프라스트럭처 (infrastructure) 모드로 설정된 무선 랜에서 모바일 IP의 핸드오프 지연을 크게 개선하여 이동 인터넷 환경의 실시간 멀티미디어 서비스에 적합함을 보여준다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.390-392
• /
• 2015

IEEE 802.11 DCF(Distributed Coordination Function) 프로토콜은 이진 지수 백오프 방식을 사용한다. 단말은 데이터 전송 전에 충돌을 피하기 위해 일정한 시간동안 채널 휴지(Idle)를 기다린다. 데이터 전송이 성공하면 경쟁 윈도우 값을 두 배로 증가시키고 실패하면 최소 값으로 초기화 한다. 이를 통해 DCF는 충돌을 회피하지만 단말의 수가 증가함에 따라 충돌율은 증가하고 전체 네트워크 성능은 저하된다. 본 논문에서는 이 문제를 해결하기 위해 예약 방식을 통한 데이터 전송 방법을 제안한다. 제안된 방법에서 채널 시간을 예약 구간과 경쟁 구간으로 나눈다. 기본적으로 경쟁 구간에서 단말들은 DCF와 마찬가지로 경쟁 방식을 통해 데이터를 전송할 때 예약 구간에 대한 채널 예약을 AP에게 요청한다. 또한 예약 구간에서 데이터를 전송한 단말은 다음 예약 구간에서의 예약을 요청한다. AP는 채널 예약을 수행한다. 채널 예약에 성공한 단말은 예약 구간에서 비경쟁 방법으로 데이터 패킷을 전송한다. 따라서 DCF의 충돌율을 낮추고 전체적인 네트워크 성능을 향상시킨다.