• Journal of IKEEE
• /
• v.1 no.1 s.1
• /
• pp.138-155
• /
• 1997

Wireless optical communication is able to obtain high antenna gain as well as utilize to transmit the high-speed information with large capacity than the RF communication. However, the propagation path (atmosphere) is considered as an attenuator occured turbulence, absorption and scattering. These undesired phenomena diminish the amount of light that is collected at the receiver. To evaluate the effect of the atmospheric turbulance and scattering, this paper perform the ground-to-ground wireless optical LAN experiment by using the (2,1,6) convolutional coder and Viterbi decoder, and analyze numerically the earth-station antenna diameter due to the propagation path condition and upstream/downstream link.

• Journal of Convergence for Information Technology
• /
• v.10 no.2
• /
• pp.32-38
• /
• 2020

In this paper, we analyze the modulation scheme for high speed transmission in visible light communication system, and study non-orthogonal multiplexing, dimming level and transmission power ratio. Conventional visible light communication has a disadvantage in that it is difficult to multi-transmit to increase the transmission speed. Multi-transmission technique is necessary for high-speed transmission at the transmitter. Since general visible light communication has a limitation in multiple transmission, various researches for high-speed transmission have been conducted. In order to solve this problem, this paper proposes a multiple modulation scheme for high-speed visible light communication using non-orthogonal multiplex transmission scheme and a future research direction.

• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.65-68
• /
• 2016

In this paper, visible light wireless communication system according to the climate is studied in the marine environment. The light visibility can be determined by the different weather conditions (clear air, rain, storm, fog) in Kim's atmospheric channel model. By simulating the OOK-NRZ modulation technique, the BER performances are compared in the different weather conditions. In the field test, the error bit is measured in the visible-light communication. The effectiveness of visible light communication in the marine environment is confirmed by comparing the analysis of simulations and field experiments.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.430-431
• /
• 2010

본 논문에서는 가시광 통신을 위한 고효율 대용량 LED 드라이버를 제안한다. 기존 가시광 통신을 위한 LED 드라이버는 LED의 선형 구동방식으로 인한 전력 손실 및 발열이 매우 심각하여 대용량의 조명용 LED에 적용하기에는 현실적인 어려움이 뒤따랐다. 하지만 제안 회로는 LED의 스위칭 방식 구동을 통해 전력 변환 효율 및 발열이 크게 개선되어 대용량의 조명용 LED에 적용할 수 있을 뿐 아니라 효율 저하 없이 최대 10Mbps의 높은 데이터 전송 성능을 가지는 부가적인 무선통신 시스템을 구현할 수 있다. 최종적으로, 제안회로의 우수성을 검증하기 위하여 무선통신 오디오 시스템을 구현하여 고찰된 실험 결과를 제시한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.3
• /
• pp.304-306
• /
• 2016

In this letter, we investigate the performance of coherent free-space optical(FSO) systems under pulsed noise jamming conditions. In particular, we derive the average bit error probability of the coherent FSO systems with the pulsed noise jamming in a closed-form. Also, we derive the optimal fraction of symbol time of the jammer. We confirm the derived average error probability expressions by the exactly matching Monte-Carlo simulation results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.4
• /
• pp.247-256
• /
• 2013

According to the complete standard document for PHY/MAC layer of visible light communication through the IEEE 802.15.7 WG on Sept. 2011, visible light communication lays a good foundation for developing a variety of application services. Thus, visible light communication moves to the advanced research period for developing application services, but most of applications are limited only to PtP service model. However, PtMP communication environment for VLC is required to accommodate more various applications. In this paper, we analyze an effect of key parameters on network performance in the star topology based visible personal area network system. We implement a simulator with considering attributes of PHY and MAC layer which are defined by IEEE 802.15.7 standard documents, and analyze the VLC performance.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.1
• /
• pp.19-23
• /
• 2010

This study is to develop power line communication and short-range wireless communication system using LED. I will create optical receiver and transmitter using LED and optical sensor and connectors for display device and communication in receiver and transmitter were created. Experiment method is to signal and waveform through oscilloscope date from optical sensor after chosen a highly efficient LED. In addition, reception and transmitter of smoothly data using visible light communication program were checked. I will compliment problems through this experiment and constantly study, improve on power loss.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.55-57
• /
• 2022

In this study, a customized semi-passive RFID receiver module was implemented for in-VIVO deep tissue photo-therapy. A novel wireless technique is required due to a limitation of RF communication in body environment, as internal body has a complex structure such as, skin, fat, skeleton, water, and so on. Recently, coherently incoherent beamforming (CIB) based on RFID was introduced and it is able to transmit wireless signal with high reliability under the incoherent condition such as in-VIVO deep tissue. The proposed miniature photo capsule based on RFID consists of miniature controller, ultra small LED array and wireless RFID chip. RF Reader can access with standard RFID protocol (ISO 18000-6c) using UHF RFID antenna, a control command is wirelessly writtern on USER Bank memory. With received control command, therapy LED array dims with mulilevel under timer control. The signal process of designed RFID photo therapy capsule is analyzed and evaluated under the various environments in detailed.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.25-30
• /
• 2021

In this paper, we studied the coding technique for flicker mitigation and BER performance improvement in visible light communication system. In order to increase the transmission speed of visible light communication, a multi-transmission multi-LED transmission system using a plurality of LEDs is being actively studied. However, when data is transmitted through N LEDs in a multi-LED visible light communication system using N LEDs, there is a continuous zero section in which 0 is transmitted simultaneously according to the data sequence, and since the transmission section of 1 is different, flickering Or, a phenomenon in which the dimming level changes occurs. The visible light communication system is a communication system that simultaneously performs communication and lighting functions. Therefore, transmission efficiency of communication and brightness of lighting must be considered at the same time. To solve this problem, we proposed a flicker reduction mapping that can alleviate flicker and dimming level problems, improve error detection and BER performance through coding mapping of each LED data sequence.

• Journal of Industrial Convergence
• /
• v.22 no.2
• /
• pp.55-62
• /
• 2024

Visible light communication, which transmits information using visible light, has advantages such as ultra-high speed, ultra-delay, and ultra-connectivity, so research is being conducted as a way to complement 6G communication. In this paper, a study was conducted to overcome the performance degradation caused by the RGB mixing ratio in visible light communication. In a visible light communication system using LED lighting, the role of lighting is an important function, and when used for communication, the performance difference according to the RGB mixing ratio inevitably occurs. In particular, if the intensity of light is below a certain standard, the problem of deteriorating the performance of the entire system occurs. In this study, when a certain performance or less occurs in the communication system caused by the difference in the mixing ratio among the three RGB channels, the remaining two signals except the LED with the best performance are transmitted to STBC (Space-Time Block Coding) to ensure the quality of communication. A computer simulation was performed to verify the performance of the proposed system, and it can be seen that the performance of the proposed system is improved compared to the existing system.