• The Research Journal of the Costume Culture
• /
• v.18 no.3
• /
• pp.465-475
• /
• 2010

For this study, 18 kinds of cut and sew or seamless knitted test garment were made. Samples differed from each other by skirt angles($90^{\circ}$, $180^{\circ}$), gauges(7G, 12G, 15G), and grain directions(bias direction, wale direction, and radial direction). After measuring the mechanical properties of various gauges on the seamless knitting machine, I compared shape of the knitted flare skirt through subjective evaluation on appearances. The data analysis methods used in this study were descriptive statistics, one-way ANOVA, Duncan-test, correlation analysis, and regression analysis. The subjective evaluation on appearances of knitted flare skirts showed the following: In case of $90^{\circ}$ skirt, the seamless skirt showed a much higher score in every gauge expect that of the cut and sew 12G, and silhouette of 15G wale direction. In case of the $180^{\circ}$ skirt, the seamless type showed a much higher score in every item over the cut and sew expect the silhouette part of 7G wale direction.

• The Research Journal of the Costume Culture
• /
• v.16 no.3
• /
• pp.425-431
• /
• 2008

The purpose of this study was to observe the changes of skirt length of knitted flare skirts when the seamless test garments were made which had been having full shape while being knitted and to change and amend the challenges in advance when those were knitted. For this study, I made 6 kinds of knitted test garments of wool 100% yarn with seamless knitting machine, which differed from each other by skirt angles ($90^{\circ},\;180^{\circ}$) and gauges (7G, 12G, 15G), and then I measured deflection changes of their length for 2 weeks. Findings and conclusions drawn from this study were as follows: First, the side seam line of full shape hecame somewhat longer than center. Second, 7G and $180^{\circ}$ knitted flare skirt showed the biggest length deflection changes. Third, there was no difference at rear waist deflection changes between front pattern and rear. Fourth, it was difficult to control the tensions of right and left strings as to the knitting directions.

• Science of Emotion and Sensibility
• /
• v.16 no.1
• /
• pp.85-94
• /
• 2013

Recently, researches of piezoelectric energy harvesting were tried and in this study, a piezoelectric energy harvesting clothes was developed. First, piezoelectric energy harvesting zone on the extremities were drawn by 3D motion capturing and as a result, the hip, the elbow, and the knee were determined. A new structure of piezoelectric harvester was developed for appling to clothes. Because it needed to be flexible and sensitive for human body, the 2 layer stacked structure was proposed. A prototype of seamless garment was designed for a harvesting clothes because it needed to be body-tight and not to restrict the movement. High peak-to-peak voltages were acquired from the energy harvesting clothes.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.69-79
• /
• 2019

This study aims to seek knitting methods that can enhance the neck design of seamless knitwear and to find out how to improve the designs by comparing and analyzing the characteristics of the knitting methods used for v-neck pullovers. The investigator analyzed the characteristics of the knitting methods and assessed the wearing sensation by using six different pieces of clothing for the experiment. The results were analyzed based on a variance analysis (ANOVA). Among the items showing significant results, the Duncan-test was used for more intensive research. As a result, while using the basic pattern of knitting methods, Experiment Clothes A ended up binding on the back neckline, and not making the hem of back. Also, the neck was the widest. In the case of the special neck, Experimental Clothes B (1:1), which had the least number of the knitting course in relation to the knitting ratio, the bottom part of the back body had the most wrinkles. According to the result of wearing sensation, the front part, the side part, and the back part showed similar results (p<0.000) in all items. Specifically, the appearance of the Experiment Clothes A (normal) in both the front and rear aspects were evaluated as the best. In the case of the special neck, the Experimental Clothes F was ranked the highest, whereas the Experimental Clothes B (1:1) was ranked the lowest. Based on the results of the study, it seems possible to provide concrete and technical data for the planning of unique and productive designs. With regard to seamless knitwear neck designs, a comparative analysis of the knitting method of v-neck pullovers will be of practical use in the development and manufacturing of the product.

• Journal of Fashion Business
• /
• v.16 no.1
• /
• pp.52-68
• /
• 2012

To achieve the aim of this study, 9 different types of samples were made to examine mechanical property according to structured pattern and type of Machi of pullover armhole of WholeGarment(seamless knitwear). With respect to samples, from which comparisons are made and anaylzed among basic characteristics of material, tensile strength & elongation and residual elongation due to repeated extension of armhole connecting part, the following conclusions could be obtained. It's revealed that the tensile strength of Machi part as being armhole connecting part of samples is more affected by Machi type than pattern structure. Of Machi types, it showed stronger tensile strength in the order of Normal(Normal Machi)< Machi_B(unilateral Machi)

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.4
• /
• pp.113-125
• /
• 2012

This study, as one on the neck design of seamless knitwears, set out to make experimental clothes applying various knitting methods to the hem of round neck, seek the knitting methods of finishing touches on the ending part of round neck to enhance function and aesthetic appreciation through measuring tensile strength and assessing wearing sensation, and provide basic data that would be of practical help to developing the design of seamless knitwears and mass production in the national knit industry. The ending part of neck of the seamless knitwear is not only the last stage in making knitwear but also affects the function and appearance of the clothes. The investigator, thus made six different pieces of experimental clothes according to the finishing methods of knitting on the neck, then measured tensile strength and put them to the test by a group of experts for the assessment of wearing sensation. The results were analyzed based on variance analysis(ANOVA), and the items with similar results were put to the Duncan test for intergroup comparison. According to the analysis results of measuring tensile strength, Experimental Clothes B received the highest evaluation, Experimental Clothes E the lowest. Also Experimental Clothes B was ranked the highest in almost every evaluation criteria, whereas Experimental Clothes E was ranked the lowest in the assessment of wearing sensation.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.4
• /
• pp.57-71
• /
• 2021

The purpose of the study is to derive an appropriate knitting method that can increase the appearance, wearability, and functionality through empirical research on the sleeve height knitting ratio of seamless knit wear. The study was conducted by producing seven types of experiment clothes according to knitting ratio to examine the characteristics according to the body armhole and sleeve height ratio. Specifically, after fit evaluatins, variance analysis (ANOVA) was performed to analyze the results of the evaluation, and the evaluated contents were converted into data. Among them, the items with significant results were intensively studied using the Duncan-test. The result showed that the height and the width of the sleeves vary depending on the knitting ratio. Test sweater A was the highest at 16cm, followed by test sweater B, test sweater C, test sweater D, test sweater E, test sweater F, and test sweater G at 4cm. The 1:1 ratio of test sweater A, was the highest, which is knitted in the same course as the body. The larger the difference in the ratio of body and sleeve, the lower the height of the sleeves. As a result of the appearance sensory evaluation, a significant difference was confirmed in the result values (p<0.001) from all items on the front, side, and rear. Specifically, the appearance of the test sweater B(2:4:2) on the front and test sweater C(2:4:3) on the side and rear side was the best. When the sleeves height is properly set, the ratio of the arm line to fit the design with a natural curve is analyzed as a very important factor. The results of this study are expected to be of practical use in product development and production that can increase the feeling when wearing and design satisfaction.

• Proceedings of the Costume Culture Conference
• /
• 2004.04a
• /
• pp.53-55
• /
• 2004

우리나라 니트 산업은 노동력, 자본, 범용 적인 차용기술, 원자재 등의 생산요소에서 원가절감을 통한 경쟁력의 이점을 추구하던 시기는 이미 지나 최근에는 중국의 중저가품 위주의 니트 제품들이 대량 유입되는 추세를 보이고 있다. 생산현장의 인력부족과 인건비 상승, 고유 기술 개발 미흡, 국제 원자재 의존성 등의 이유로 이미 대 선진국 수출에서 비가격 부문의 경쟁력을 상실한 국내 니트 업계는 선진국들의 니트 제품과의 가격 경쟁력까지 상실해 가고 있는 것이 현실이다. (중략)

• Fashion & Textile Research Journal
• /
• v.23 no.1
• /
• pp.129-141
• /
• 2021

This study investigated fabrics, washing and cares, design, pattern, subsidiary materials, and sewing methods with a focus on the functional outers using moisture-permeable waterproof fabric as a shell; in addition, each element was analyzed for differences depending on fabric type. The characteristics of 34 outers were investigated through labels, online product introductions, visual inspection, observations from two experts with more than 30 years experience and wear tests. Moisture-permeable waterproof fabrics used for the outer were classified into two types; in addition, the shell of the high-density fabric and the 2 & 3-layer fabrics had different characteristics. Various fabrics, detailed designs, and three-dimensional patterns suitable for each part of the human body were used to improve functionality. In addition, various subsidiary materials and sewing methods were used to form an organic relationship. The same washing and cares, patterns and subsidiary materials were used regardless of fabric type; however, the fabric type influenced the detailed design and sewing. The outers with high-density fabric had a loose fit, short placket, e-banded cuffs, lock-stitch, and lock-stitch+binding. However, the outer with 2 & 3 layer fabric had a slim fit, hood width adjustment, zippered pockets, cuffs with tab, seamless adhesive sewing such as laminating, lock-stitch+ seam-sealing, and welding.

• Fashion & Textile Research Journal
• /
• v.11 no.3
• /
• pp.488-495
• /
• 2009

The purpose of this study is to experiment and develop seamless-effect knitwear design using tubular-jacquard structure in order to find a new method of manufacturing knitwear and to suggest a new design. The study is based on changing the point of view about using the practical technique like the tubular jacquard which has been used mainly for expressing patterns. The result of experimenting this, a piece of fabric is able to being worn as a piece of garment. As for using circular structure of tubular jacquard, a body can be fitted into the big space between front and back part of fabric and seams can be made of small patterns of jacquard fabric. The silhouette, the drape and the result of the garment of this experiment are different from the ordinary outfit. Therefore, the study to find a new way of design and manufacturing should go on to suggest a different form and method.