• Korean Journal of Human Ecology
• /
• v.24 no.5
• /
• pp.687-700
• /
• 2015

Lines of non-extension (LoNEs) on torso surface during arm abduction were investigated to provide appropriate location for inserting less-extensible yarns which can be used as seams for design and or clothing pressure variation. As experimental methods, reference points about 3 cm apart were marked on the skin and scanned at 30, $90^{\circ}$ and $135^{\circ}$ arm abduction. Skin deformation was measured by connecting reference points in horizontal, vertical and various angles of diagonal directions. Observation of skin deformation was made within the separated sections of the torso as well as integrated ones to cover the various occasions of design application. LoNEs of front and back torso were provided as mapping lines. Actual compression wear of three types was constructed with different pattern reduction rate at each separated section using LoNEs as boundary cutting lines. Clothing pressure and subjective evaluations of those three compression wear were evaluated by six subjects. LoNEs found in this study were useful as seam lines to differentiate clothing pressure at each part of the body, providing positive wear sensation. It is also expected that LoNEs can be paths for less strechable conductive yarns of IT-integrated upper garments.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2007

This study introduces an elastic parabolic cable element for initial shaping analysis of cable-stayed bridges. First, an elastic catenary cable theory is shortly summarized by deriving the compatibility condition and the tangent stiffness matrices of the elastic catenary cable element. Next, the force-deformation relations and the tangent stiffness matrices of the elastic parabolic cable elements are derived from the assumption that sag configuration under self-weights is small. In addition the equivalent cable tension is defined in the chord-wise direction. Finally, to confirm the accuracy of this element, initial shaping analysis of cable-stayed bridges under dead loads is executed using TCUD in which stay cables are modeled by an elastic parabolic cable and an elastic catenary cable element, respectively. Resultantly it turns that unstrained lengths of stay cables, the equivalent cable tensions, and maximum tensions by the parabolic cable element are nearly the same as those by the catenary cable elements.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.387-387
• /
• 2012

결정 Si 및 비정질 Si 태양전지는 환경친화적이며 안정적인 물질로 전력변환 및 에너지 저장 장치에 중요하기 때문에 연구가 활발하게 진행되고 있다. 고효율 Si 태양전지를 제작하여 상용화하기에는 여러 가지 문제점이 있다. 공기와 비교하여 높은 굴절률을 갖고 있기 때문에 발생하는 반사를 줄이기 위해서 필요한 무반사 코팅층(Anti-reflective coating; ARC)은 주로 SiO2 와 SiNx 와 같은 유전체를 이용하여 사용하지만 이들 ARC 증착은 PECVD와 같은 진공장비를 사용하므로 제작 비용이 높아지는 단점이 있다. 나노선 또는 나노 팁과 같은 sub-wavelength 구조를 표면에 만들어 반사율을 줄이는 작업을 통해 ARC 공정비용을 감소하고 효율을 증진하는 연구가 활발히 진행되고 있다. CdS 양자점을 태양전지 표면에 형성함으로 ARC로 해결할 수 없는 단파장영역에 해당하는 부분을 줄이는 연구가 진행되었으며, 비정질의 경우 원기둥 형태의 태양전지 형태와 더불어 지름 방향으로의 PN 접합 나노로드 배열을 만들어 흡수면을 증가하여 효율을 증가한 연구도 진행되었다. 태양전지 표면의 형태를 V-groove 형태로 형성하여 입사하는 태양전지의 광밀도를 증가하는 이론적 결과도 발표되었다. 본 연구에서는 Si 태양전지의 표면변형에 따른 태양전지의 전력변환효율의 변화를 관찰하기 위하여 태양전지 표면의 texture 지름을 $3{\sim}15{\mu}m$, 간격을 $5{\sim}20{\mu}m$로 변화하고, 태양전지 표면의 나노 패턴을 2~10 nm 로 변화하여 반사율과 전력변환효율을 비교하였다. 나노와 마이크로 패턴은 각각 polystyrene nanosphere 와 photo mask를 이용하여 제작하였으며 PN junction Si 태양전지는 spin on dopant 방식으로 제작하여 성능을 조사하였다.

• Korean Journal of Agricultural Science
• /
• v.25 no.2
• /
• pp.260-270
• /
• 1998

The field tests were performed to suggest the rational method for stability evaluation of soft clay. The behavior of settlement-displacement obtained by field monitoring system was to compare and analyze the results of the observationed method, and to investigate the complex behavior of soft clay with filling height. The results of this study are summarized as follows. 1. The horizontal displacement was suddenly increased when physical properties of soft clay showed maximum values and the part of the turning point. The values of these properties were available to the fundamental data for stability evaluation. The shear deformation appeared that difference of the horizontal displacement was maximum values. 2. Although the stability of embankment by step filling showed the unstable part over the failure standard line, the embankment was confirmed stable. So the evaluation of the stability of embankment is reasonable to use the inclination of curve than failure standard line. 3. The horizontal displacement and relative settlement were increased as same ratio at improvement ground. Estimation of shear deformation using Terzaghi's modified bearing capacity should consider the relations of embankment load and undrained shear strength at nonimprovement ground, and minimum safety factor is recommended to use larger than 1.2. 4. Excess pore water pressure was increased with increasing of filling height and decreased with maintain the filling height. The embankment was unstable when filling height was exceed the evaluation standard line, and the behavior of excess pore water pressure and horizontal displacement could use as a standard of judgement of the filling velocity control because their behavior were agree with each other.

• Journal of the Korean Geographical Society
• /
• v.42 no.4
• /
• pp.488-505
• /
• 2007

The purposes of this research are twofold; 1) to verify spatial differences of tectonic movement using the spatial distribution of earthquakes, and 2) to infer mechanisms that generate spatial accumulation patterns of earthquakes in the Korean Peninsula. The first part of this sequential paper (Park, 2007) argues that the Korean Peninsula consists of four geostructural regions in which tectonic deformation and consequent geomorphological development patterns are different from each other Since this conclusion has been made by terrain analyses alone, it is necessary to verify this suggestion using other independent geophysical data. Because earthquakes are results of movement and deformation of land masses moving in different directions, the distribution of earthquake epicenters may be used to identify the direction and rates of land mass movement. This paper first analysed the spatial distribution of earthquakes using spatial statistics, and then results were compared with the spatial arrangement of geostructural regions. The spatial distribution of earthquakes in the Korean Peninsula can be summarized as the followings; firstly, the intensity of earthquakes shows only weak spatial dependency, and shows large difference even at adjacent regions. Secondly, the epicenter distribution has a clear spatial accumulation pattern, even though the intensity of earthquake shows a random pattern. Thirdly, the high density area of earthquakes shows a clear 'L' shape, passing through Pyeongannam-do, centered at Pyeongyang, and Hwanghae-do, Seosan and Pohang. The correlation coefficient between the density of earthquakes and distance from geostructral region boundaries is much higher than those between the density of fault lines and distance from tectonic division boundaries. Since fault lines and tectonic divisions in the Korean Peninsula are the results of long-term geological development, there is an apparent scale discrepancy to find significant correlations with earthquakes. This result verifies the research hypothesis that the Korean Peninsula is divided into four geostructral regions in which each has its own moving direction and spatial deformation characteristics. The existence of geostructural regions is also supported by the movement parrerns of land masses estimated from the GPS measurements. This conclusion is expected to provide a new perspective to understand the geomorphological developments and the earthquake occurrences in the Korean Peninsula.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.3
• /
• pp.625-639
• /
• 2018

This study is about the reinforcing type of reinforcement method which is reinforced in tunnel portal of tunnel with bad ground condition. Generally, it is known that the horizontal reinforcement method is more effective than the conventional reinforcement method. However, as a limitation of the tunnel construction technology, it is being constructed by the superposition reinforcement method. In recent years, high-strength large-diameter steel pipes and horizontally oriented longitudes (L = 30.0~50.0 m) construction technology have been developed. Therefore, it is required to study reinforcement method of tunnel portal reinforcement method. Therefore, 3-D numerical analysis (Midas GTS NX 3D) was performed by setting the reinforcement method (No reinforcement type, overlap reinforcement type and horizontal reinforcement type) and ground condition as parameters. As a result, it was considered that the reinforcement effect was the largest as the horizontal reinforcement type of the reinforcement method was the smallest in the displacement and the support material stress. Based on the results of the numerical analysis, horizontal steel pipe grouting was applied to the actual tunnel site. The displacement of the tunnel portal and the stress of the support material occurred within the allowable values and were considered to ensure sufficient stability.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1140-1145
• /
• 1998

Low density polyethylene (LDPE) films incorporated with 1% antimicrobial agents of Rheum palmatum extract, Coptis chinensis extract, and Ag-substituted inorganic zirconium matrix, were applied to modified atmosphere packaging of 200 g fresh strawberries. Plain LDPE film package, PVC wrap and perforative pinhole package of the film impregnated with 1% Rheum palmatum extract were also constructed for comparative purpose. All the packages were stored for 13 days at $5^{\circ}C$ and measured in package atmosphere, microbial count and quality attributes of the strawberry fruits. The antimicrobial LDPE films retarded the growth in total aerobic bacteria, lactic acid bacteria and yeast on the fruits, and resulted in significantly lower decay. The degrees of reduced microbial growth and fruit decay in the antimicrobial film packages were more pronounced, when applied by hermetical sealing to produce the modified atmospheres of low $O_2$ (<4.0%) and $CO_2$ concentrations with $6.3{\sim}9.0%$. The hermetically sealed packages of antimicrobial LDPE films also showed better retention of fruit firmness and did not give any negative effect on the physical and chemical qualities of strawberries.

• Journal of Food Hygiene and Safety
• /
• v.13 no.2
• /
• pp.106-111
• /
• 1998

This study has been focused on both estrogenic and proliferating activity of genistein (GEN) and bisphenol A (BPA). GEN and BPA enhance the proliferation of estrogen-dependent MCF-7 human breast cancer cells at concentrations as low as 100 nM of GEN and 8 ng/ml of BP A achieving similar effect to that of estradiol at 1 nM. Expression of the estrogen responsive gene, pS2 was also induced in MCF-7 cells by treatment with genistein at dose as low as 1 nM and BPA at dose as low as 4 ng/ml. Using 21 day-old ovariectomized nude mice, we examined end-bud formation and mammary gland development after treatment with bisphenol A or genistein. Compared with untreated control, mammary gland development and end-bud formation were significantly increased in mice fed genistein or bisphenol A (p<0.05). Taken together, it is concluded that GEN and BP A can act as an estrogen agonist resulting in cell proliferation and induction of the estrogen responsive pS2 gene in MCF-7 cells in vitro and in athymic mice in vivo, respectively. Therefore, it is suggested that GEN and BP A might modulate human endocrine system and these compounds might be considered as a endocrine modulator at the low levels of doses.

• Radiation Oncology Journal
• /
• v.28 no.3
• /
• pp.166-176
• /
• 2010

Purpose: To determine the appropriate prostate planning target volume (PTV) margins for 3-dimensitional (3D) conformal radiotherapy (CRT) and intensity-modulated radiation therapy (IMRT) patients treated with an endorectal balloon (ERB) under our institutional treatment condition. Materials and Methods: Patients were treated in the supine position. An ERB was inserted into the rectum with 70 cc air prior to planning a CT scan and then each treatment fraction. Electronic portal images (EPIs) and digital reconstructed radiographs (DRR) of planning CT images were used to evaluate inter-fractional patient's setup and ERB errors. To register both image sets, we developed an in-house program written in visual $C^{++}$. A new method to determine prostate PTV margins with an ERB was developed by using the common method. Results: The mean value of patient setup errors was within 1 mm in all directions. The ERB inter-fractional errors in the superior-inferior (SI) and anterior-posterior (AP) directions were larger than in the left-right (LR) direction. The calculated 1D symmetric PTV margins were 3.0 mm, 8.2 mm, and 8.5 mm for 3D CRT and 4.1 mm, 7.9 mm, and 10.3 mm for IMRT in LR, SI, and AP, respectively according to the new method including ERB random errors. Conclusion: The ERB random error contributes to the deformation of the prostate, which affects the original treatment planning. Thus, a new PTV margin method includes dose blurring effects of ERB. The correction of ERB systematic error is a prerequisite since the new method only accounts for ERB random error.

• The Korean Journal of Pesticide Science
• /
• v.17 no.1
• /
• pp.65-71
• /
• 2013

The modified QuEChERS method was evaluated for rapid determination of pesticide residues in spinach by gas chromatography-nitrogen phosphorous detector (NPD) and electron capture detector (ECD). Fifty GC-amenable pesticides which were most frequently detected in monitoring were selected in the current study. Matrix-matched calibration was performed. The detector response for all pesticides was linear with determination coefficients higher than 0.995. LODs for most compounds ranged between 0.001 and 0.1 ug/g, and about 90% of the compounds had LODs of less than 0.05 ug/g. LOQs ranged from 0.001 to 0.32 ug/g, which were well below the MRLs permitted for most of pesticides. In the majority of cases, the recoveries (80-120%) and relative standard deviations (RSDs) (less than 20%) were within acceptable levels except for dichlorvos, propamocarb, chlorothalonil, dichlofluanid, cyhalothrin and fenvalerate. Also, this method which is applied to routine samples showed good results when comparing with traditional multi-residue method.