• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.391-398
• /
• 2005

The outbound containers in a container terminal are classified into a few groups by their weights and stocked separately in a yard for easy and efficient handling. In order to maintain the balance of a ship during loading, containers of heavier weight groups should be fetched out of a yard and loaded onto the ship before those of lighter weight groups. However, the weight information used to determine the weight group is usually imprecise. Therefore stacks will actually be filled with mixture of different weight groups and rehandlings are unavoidable during loading operation. This paper presents a method for estimating the number of rehandlings caused by imprecise information and a scheme for generating a simple but efficient slot assignment rule. Experiments have shown that a rule generated by the proposed method can reduce the number of rehandlings by about 20%compared to the traditional slot assignment method which stacks only the containers of the same weight group in a single stack.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.05a
• /
• pp.59-64
• /
• 2006

In this study, the risk of SRRs was assessed upon the scale of the damage of marine accidents. For the risk assessment, inner-outer dependence methods and special knowledge-based fuzzy logic were introduced. Also, in order to calculate the importance of assessment value in this study, a max min composition method was used for fuzzy logic based on the principle of fuzzy extension and the centroid of gravity method was used for non-fuzzy formation. In order to produce the importance of assessment items, the inner-outer dependence methods were used for assessment items, and markov analysis method was used for the importance of the final comprehensive assessment. As a result, the risk of SRR of Tongyoung and Yeosu was proven relatively higher, thus, it needs to have more rescue ships and rescue devices for relieving the risk in the future.

• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.909-915
• /
• 2004

This paper suggests an evaluation of risk level for damage of marine accidents in SRRs. Qualitative analyses in words is sometimes priorior to quantative analyses in numeric symbols. This paper introduces a concept of fuzzy theory with the plenty of related literature riview and AHP in the Korean SRRs of RCC and RSC. The methodology of this paper is $max{\cdot}min$ composition of fuzzy extensive principle, defuzzifiation is centroid of gravity methods. At the result, the evaluation of risk level is especially over Serious for marine accident of Busan SRRs. This paper recommends that many Rescue Vessels and Equipments need to the reduction of risk level about those.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.11a
• /
• pp.83-88
• /
• 2004

This paper suggests on evaluation of risk level for damage of marine accidents in SRRs. This paper intoduces a concept of fuzzy logic with the plenty of related literature riview, fuzzy measure t-seminormed fuzzy integral and in the Korean. SRRs of RCC and RSC. The methodology of this paper is max$\cdot$min composition of fuzzy extensive principle, defuzzifiation is centroid of gravity methods. And final evaluation value using t-seminormed fuzzy integral. At the result, the evaluation of risk level is especially over Serious for marine accident of Mokpo, Tongyoung, Busan SRRs. This paper recommends tint many Rescue Vessels and Equipments need to the reduction of risk level about those.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.3 s.26
• /
• pp.219-224
• /
• 2006

In this study, the risk of SRRs was assessed upon the scale of the damage of marine accidents. For the risk assessment, inner-outer dependence methods and special knowledge-based fuzzy logic were introduced. Also, in order to calculate the importance of assessment value in this study, a max-min composition method was used for fuzzy logic based on the principle of fuzzy extension and the centroid of gravity method was used for non-fuzzy formation. In order to produce the importance of assessment items, the inner-outer dependence methods were used for assessment items, and markov analysis method was used for the importance of the final comprehensive assessment. As a result, the risk of SRR of Tongyoung, Mokpo and Yeosu was proven relatively higher, thus, it needs to have more rescue ships and rescue devices for relieving the risk in the future.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.19-19
• /
• 2009

최근, 유한한 에너지 자원의 한계와 지구 온난화 등으로 세계의 제조 산업은 새로운 국면을 맞이하고 있으며, 특히, 자동차 산업은 화석연료를 주 에너지원으로 사용한다는 점과 이 연료를 연소시킬 때 발생하는 이산화탄소가 지구 온난화의 주된 원인이 될 수 있다는 점에서 상기 문제들을 해결하기 위한 다양한 방법에 주목하고 있다. 그 중에서 자동차의 생산기술 측면에서 볼 때, 가장 중요한 이슈는 차체 경량화다. 자동차 차체는 자동차를 구성하고 있는 여러 가지 부품 중에서 약 40% 정도의 무게 비율을 차지하고 있기 때문에, 차체 경량화는 연비향상과 이산화탄소 배출가스 감소와 직접적인 관계를 가지고 있다. 다양한 차체 경량화 방법 중에서 가장 쉽게 접근할 수 있는 방법이 경량소재 적용에 의한 경량화 방법이다. 현재, 탄소섬유 강화 플라스틱과 같이 무게 절감 비율을 최대화 할 수 있는 소재들도 개발되어 일부 적용되고 있지만, 일반적으로 차체 경량화 소재로 가장 널리 사용되고 있는 소재는 알루미늄 합금이며, 이에 대한 차체 적용 비율이 점차로 높아지는 추세에 있다. 이에, 본 연구에서는 알루미늄 합금이 차체에 적용되었을 때의 장단점을 살펴보고, 알루미늄 합금을 적용한 차체 생산과정에서 유의해야 될 사항들과 이를 바탕으로 하는 생산성 극대화 방안에 대하여 고찰하였다. 먼저, 기존의 알루미늄 저항 점 용접공법의 단점을 최소화하고 대량생산 체계에 적합하도록 개발된 새로운 개념의 저항 점 용접 시스템에 대해 그 성능과 양산성을 검증하였다. 구리 전극과 알루미늄 피용접물 사이에 프로세스 테이프를 삽입하여 용접하는 이 시스템은 열전도성이 큰 알루미늄 용접부에서 저전류의 조건에서도 효과적으로 균일한 발열현상이 발생하게 하였으며, 전극 팁 드레싱 없이 모든 용접점이 항상 동일한 조건에서 용접이 이루어질 수 있도록 하였다. 용접 조건 설정에 있어서도 용접전류가 통전되는 순간에 전극 가압력을 자유로이 변형시켜 용접부 크랙 발생을 최소화할 수 있음을 확인하였다. 알루미늄의 또 다른 대표적인 접합방법인 아크용접에 있어서는 용접 입열량을 조절하여 용접변형을 최소화 할 수 있는 아크용접 시스템에 대해 양산성과 적용 타당성을 검토하였다. 와이어 송급 방향을 자유자재로 바꿀 수 있는 이 시스템의 특성에 의해 스패터를 최소화하면서 용융금속이 효과적으로 모재에 금속이행 될 수 있음을 확인하였으며, 판재, 압출재, 및 다이캐스팅재 등 다양한 차체 소재에 대한 용접 가능성 및 미그-레이저 하이브리드 용접과의 비교분석을 통하여 차체 박판 용접에서도 최소의 열변형으로 효과적으로 사용될 수 있음을 보였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3142-3150
• /
• 2013

Present research deals with an optimal design of the C-type frame of a desktop pressing machine to minimize its deformation which plays an important role in accuracy of the machine. Deformation pattern of the frame is analyzed by the finite element method. Design parameters are defined for the frame to derive an optimal design. Displacement and weight sensitivities of the parameters are analyzed using the method of the parametric study. On the basis of the response curves for the parameters, optimal designs of the frame are proposed. Effectiveness of the optimal design is verified by analyses in the viewpoint of the deformation and weight of the frame. Deformation of the optimized frame without increase of the weight is 87.5 % of the original frame.

• The KIPS Transactions:PartC
• /
• v.12C no.7 s.103
• /
• pp.1025-1030
• /
• 2005

Cooperative communications among users in multiple access wireless environments is an efficient way to obtain the powerful benefits of multi-antenna systems without the demand for physical arrays. This paper proposes a solution to optimize the weights of partnering users' signals for the minimum error probability at the output of maximum likelihood (ML) detector under the transmit power constraints by taking advantage of channel state information (CSI) feedback from the receiver to the transmitter. Simulation programs are also established to evaluate the performance of the system under flat Rayleigh fading channel plus AWGN (Additive White Gaussian Noise).

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.149-157
• /
• 2003

The HEPA filter waste (Hexahedron, $610{\times}610{\times}292mm$, 20kg), which is used for the ventilation system in the nuclear industries, has relatively large volume to compare with it's weight. Due to the large volume of HEPA filter waste, it needs the large storage and/or disposal space and managing cost during the long period of storage and management. Many countries use the compactor to reduce the volume of HEPA filter waste. On this paper we introduce the new type compactor developed by KAERI with the characteristical comparison to the Japan's and U.S.A's compactors.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.5
• /
• pp.49-57
• /
• 2020

Conventional electric motors are not suitable for aircraft because of their large size and weight. High-temperature superconducting (HTS) motors have high current density, high magnetic field density, and low loss, so they can significantly reduce the size and weight compared to general electric motors. This paper presents the conceptual design and analysis results of HTS motors for electric propulsion in future aircraft. A 2.5 MW HTS motor with a rotational speed of 7,200 RPM was designed and the specific power (kW/kg) was analyzed. The operating temperature of the field coil of the HTS motor is 20K in consideration of LH2 cooling. The stator winding were connected in a multi-phase configuration and Litz wires were used to minimize eddy current losses. As a result, it was confirmed that the specific power of the motor is about 18.67 kW/kg, which is much higher than that of the conventional electric motor.