• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.1
• /
• pp.13-34
• /
• 2022

Soil moisture data have been collected at 11 agrometeorological stations operated by The Korea Meteorological Administration (KMA). This study aimed to verify the accuracy of soil moisture data of KMA and develop a correction formula to be applied to improve their quality. The soil of the observation field was sampled to analyze its physical properties that affect soil water content. Soil texture was classified to be sandy loam and loamy sand at most sites. The bulk density of the soil samples was about 1.5 g/cm³ on average. The content of silt and clay was also closely related to bulk density and water holding capacity. The EnviroSCAN model, which was used as a reference sensor, was calibrated using the self-manufactured "reference soil moisture observation system". Comparison between the calibrated reference sensor and the field sensor of KMA was conducted at least three times at each of the 11 sites. Overall, the trend of fluctuations over time in the measured values of the two sensors appeared similar. Still, there were sites where the latter had relatively lower soil moisture values than the former. A linear correction formula was derived for each site and depth using the range and average of the observed data for the given period. This correction formula resulted in an improvement in agreement between sensor values at the Suwon site. In addition, the detailed approach was developed to estimate the correction value for the period in which a correction formula was not calculated. In summary, the correction of soil moisture data at a regular time interval, e.g., twice a year, would be recommended for all observation sites to improve the quality of soil moisture observation data.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.145-145
• /
• 2017

농작업 자세 중에서 중량물을 반복적으로 들고 내리는 자세는 요통과 같은 근골격계 질환의 유발행위로 분류된다. 이는 인간공학적 유해요인 평가도구에 의해 위험도 별로 정량화 할 수 있다. 이러한 평가방법은 농작업 자세를 개선하여 근골격계 질환을 예방할 수 있다는 측면에서 매우 중요하다. 그러나 기존의 작업자세 부하 평가방법들은 동적 자세를 평가하는데 있어 어려움이 있을 뿐 만 아니라 평가 과정에서 관찰자의 주관성이 개입 될 수 있다는 한계점을 갖고 있다. 이에 본 연구에서는 중량물을 들고 내리는 동적 자세에서 발생하는 부하를 Energy expenditure를 이용하여 평가할 수 있는 시스템을 개발하는 것이다. Energy expenditure는 체중, 성별 등과 같은 작업자 관련 변수와 중량물의 무게, 들어 올리는 높이, 빈도수 등과 같은 작업환경 관련 변수를 이용하여 최대 산소소비량을 예측하는 방법이다. 본 연구에서 제안하는 작업자 및 작업환경 관련 변수를 자동 측정하는 시스템은 초음파 거리측정 센서와 깔창 형태의 센서를 이용하여 구성하였다. 이를 통해 남성(6명), 여성(6명)을 대상으로 20kg의 중량물을 들고 내리는 동작에서 발생하는 Energy expenditure 값을 산출하였고, 산소소비량 측정 장비를 통해 획득된 최대 산소소비량($VO_2$)과 비교하여 검증하였다. 여성을 대상으로 한 Energy expenditure 값과 최대 산소소비량 간 상관관계는 0.984로 나타났으며, 남성의 경우에는 0.998로 높은 상관관계를 보였다. 이와 같은 에너지 대사율 평가시스템은 연속적이고 반복적인 실제 농작업 자세 부하를 동적인 상태에서 평가할 수 있을 뿐 만 아니라 산소소비량 측정기와 같은 추가적인 장비가 필요하지 않아 현장 적용성이 뛰어 날 것으로 기대된다.

• Journal of Sensor Science and Technology
• /
• v.3 no.2
• /
• pp.65-73
• /
• 1994

TO:F($SnO_{2}:F$) thin films were prepared by RF magnetron sputtering system. The dependence of their structural, electrical, and optical properties on deposition conditions such as substrate temperature, working pressure and power was studied. The optimum conditions of TO:F thin film are $SnF_{2}$ content of 15wt.% in target, RF power of 150W, substrate temperature of $150^{\circ}C$ and working pressure of 2mmTr. The resistivity and transmittance at 550nm in visible spectrum of the TO:F film deposited at optimum condition are $9{\times}10^{-4}{\Omega}{\cdot}cm$ and above 85%, respectively. For the films deposited from the target without $SnF_{2}$ and with 15wt.% $SnF_{2}$, the optical bandgaps calculated from the transmittance curves are 3.84 and 3.9eV, respectively. X-ray diffraction patterns showed that TO and TO:F films had tetragonal rutile structure with (101), (200) direction.

• The Journal of the Korea Contents Association
• /
• v.8 no.6
• /
• pp.8-15
• /
• 2008

In this paper, in order to analyze property of frequency response in optical microphone, system was implemented. The capacitance microphone and fiber-optic transmission path type fiber-optic microphone (FOM) have weaknesses in directivity, size, weight, and price. However suggested optical microphone can be constituted by cheap devices, so it has many benefits like small size, light weight, high directivity, etc. Head part of optical microphone which is suggested in this paper is movable back and forth by sound pressure with the attached reflection plate. Operating point is determined by measuring the respond characteristics and choosing the point on which has maximum linearity and sensitivity while changing the distance between optical head and vibrating plate. We measured the output of the O/E transformed signal of the optical microphone while frequency of sound signal is changed using sound measurement/analysis program, Smaart Live and USBPre, which are based on PC, and compared the result from an existing capacitance microphone. The measured Optical microphone showed almost similar output characteristics as those of the compared condenser microphone, and its bandwidth performance was about 300[Hz]-3[kHz] at up to 3 [dB].

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.11
• /
• pp.949-954
• /
• 2016

When a snowplow is operating in the up or down direction, the sensor stops the movement automatically and the wire could be broken from an endless drive in the reverse direction impact or conversely winding wire. In the present study, a new bobbin was designed to ensure the durability of snowplows; in this design, the bobbin plays the role of a clutch during power transfer or idling. This will protect the blade of the snowplow during an impact and maintain close contact of the blade with the road. Therefore, the new technology to eliminate the tension and fatigue of the wire is suggested by winding a chain instead of the wire in the newly designed bobbin. From these, it was developed to extend the life of the snowplow without causing damages to the vehicle.

• Journal of Sensor Science and Technology
• /
• v.12 no.2
• /
• pp.88-94
• /
• 2003

Electromyogram (EMG) is the bioelectric signal induced by motor nerves. Analyzing EMG with the movement produced by muscle contraction, we can provide input commands to a computer as a man-machine interface as well as can evaluate the patient's motional abnormality. In this paper, we developed an integrated miniaturized device which acquires and transmits the surface EMG of an interested muscle. Developed system measures $60{\times}40{\times}25mm$, weighs 100g. Using an amplifier circuitry on the electrodes and the radio frequency transmission, the developed system dispenses with the use of cables among the electrodes, amplifier, and the post processing system (personal computer). The wiring used in conventional systems can be obstacle for natural motion and source of motion artifacts. In results, the developed system improves not only the signal-to-noise ration in dynamic EMG measurement, but also the user convenience. We propose a new human-computer interface as well as a dynamic EMG measurement system as a possible application of the developed system.

• Korean Journal of Optics and Photonics
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2008

Shack-Hartmann sensors are widely employed as a wavefront measuring device in various applications. Adaptive optics is one of the major applications. Since an adaptive optics system should be operated in real-time, high-speed wavefront sensing is essential. In high-speed operation, integration time of an image detector is very short. In this case, noises such as readout noise and photon noise greatly influence the accuracy of wavefront sensing. Therefore a fast and noise-insensitive centroid finding algorithm is required for the real-time wavefront sensing. In this paper, the multi-resolution correlation method is proposed. By employing multi-resolution images, this method greatly reduces the computation time when compared to the fast Fourier transform (FFT) correlation method. The verification is performed through the computational simulation. In this paper, the center of mass method, correlation method and multi-resolution correlation method are employed to compare the measurement accuracy of the centroid finding algorithms. The accuracy of a Shack-Hartmann wavefront sensor using the proposed algorithm is proved to be comparable to that of the conventional correlation method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.53-53
• /
• 2021

본 연구에서는 수심센서가 장착된 고성능 GPS 전자부자를 활용하여 하천 수리량 측정에 대한 방법과, 개발 된 고성능 GPS 전자부자의 성능 검증을 위해서 수리량 측정장비인 Flowtracker 측정데이터와 비교분석을 하고자 하였다. 국내 하천환경에서의 수리량 조사는 필수적인 요소이다. 최근 국내 첨단기술을 활용한 수리량 계측 기술들은 ADCP, ADV, UVM, SIV와 같은 많은 계측 기술들이 있다. 이러한 기술들은 장비가 매우고가이며, 많은 시간과 인력이 필요하고 상황에 따른 한계점들이 존재한다. 이러한 수리량 계측 기술들은 오일러리안 타입 계측 방식의 측정으로 계측 구간이 한정되어 있어 수질 오염사고와 같은 장구간의 지속적인 정보가 필요한 하천상황에 따라 라그랑지안 방식의 계측도 필요하다. 본 연구에서 개발 된 고성능 GPS 전자부자는 IoT 기술이 접목되어 실시간 데이터 활용이 가능하며 실시간 데이터 분석을 통해 라그랑지안 타입의 장구간 계측이 가능하다. 고성능 GPS 전자부자는 외경 197mm 지름 88mm, 무게 700g 이내로 간편하게 소지 및 사용 시 투척이 간단하여 인력 및 현장 접근성에 대한 장점을 가지고 있다. 또한 기존 선행 연구들의 GPS 전자부자들의 경우 홍수 발생 시에 유량 측정에서 어려움이 있었기 때문에 본 연구에서 개발된 고서은 GPS 전자부자의 경우 수심센서의 장착으로 유량까지 산정할 수 있기 때문에 홍수 발생이나, 오염물질 발생으로 인한 접근성이 어려운 하천상황에서 유용하게 사용될 수 있다. 고성능 GPS 전자부자를 활용하여 중·소하천인 경북 김천 및 구미시에 위치한 감천에서 성능 평가를 진행하였으며 Flowtracker 수리량 측정 데이터 대비 오차율이 10% 이내로 들어오는 것을 확인하였다. 이러한 성능 검증을 바탕으로 고성능 GPS 전자부자를 활용한 측정법을 제시하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1239-1244
• /
• 2023

In this study, we developed an IoT-based management system to manage a can/PET crusher. Various sensors such as two load cells, DHT22 temperature and humidity sensor, and fine dust meter were interfaced with ESP32 to construct an IoT device, and a management server was built using Node-RED. The system monitors the weight of pressed cans and shredded PET bottles in real time and sends a text message to the manager when the weight exceeds the predetermined threshold for timely collection. The results of the operational test confirmed that the system provides accurate monitoring and efficient notification functions, and offers the possibility of solving environmental problems by improving the efficiency of waste management such as cans and PET bottles.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.2
• /
• pp.123-128
• /
• 2014

This paper presents the study about MGV(Magnetic guidance vehicle) with up-and-down rotating type differential drive unit. Previous MGV needs the landmarks to get the driving information and additional sensor to recognize the landmarks except for localization sensor. Previous MGV requires at least 2 drive units when common fixed differential drive unit is used because it occurs the problems with driving control and localization error from imbalance of the MGV's weight. To solve such problems, we propose the MGV using up-and-down rotating type differential drive unit. Proposed MGV recognizes the driving information from the pattern which is consisted of both pole of magnet without landmarks and additional sensors, and it control the backward movement using up-and-down rotating type differential drive unit instead of common drive units. Proposed MGV considers KF(Kalman filter) to improve the localization accuracy. To verify the performance of proposed method, we designed MGV for the experiment. As the results, we can confirm the performance of propoesed method to recognize the pattern and to control the backward movement. With respect to localization, proposed method has the less RMSE about 5.6904 mm than previous method.