• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.102-107
• /
• 2016

본 연구에서는 동역학적 격자기반 대정준 Monte Carlo (Kinetic Lattice Grand Canonical Monte Carlo, KLGCMC) 모의실험 방법을 이용하여 비정상 몰분율 효과 (Anomalous mole fraction effect)에 대해서 알아보고자 하였다. 이를 위해 양이온 선택성을 가진 이온채널 모델에서 $NH_4{^+}$와 $Rb^+$의 혼합물에 대하여 몰분율의 변화에 따른 이온전도도를 KLGCMC 모의실험을 이용하여 계산하고, 이를 평균장 이론인 Poisson-Nernst-Planck (PNP)의 결과와 비교해 봄으로써 비정상 몰분율 효과에 대하여 심도 있게 이해하고자 하였다. 본 연구 결과로부터 비정상 몰분율 효과는 이온채널의 이온 선택성에 의해서 발생함을 확인할 수 있었다. 즉, 두 종류 이상의 이온들이 채널 내부로 이동할 때, 이온채널의 이온 선택성에 의해서 각 이온들과 채널 간에 서로 상이한 상호작용을 하게 되고, 이로 인해서 이온 혼합물 조성의 변화, 즉 몰분율의 변화에 대해서 이온 전류가 선형적이 아닌 비선형적으로 변하게 됨을 알 수 있었다.

• Land and Housing Review
• /
• v.4 no.1
• /
• pp.119-124
• /
• 2013

Generally, the characteristic of nanofiltration membranes were catagorized into charged membrane, sieve effect, interaction between membarnes and target solutes. This study aims to investigate the effect item of heavy metal separation with view of charge nanofiltration membranes. The experiments of nanofiltration were conducted by nanofiltration set-up with operational pressure of 0.24 MPa at $25^{\circ}C$ by using synthetic wastewater containing 0.1mg/L of Cr, Fe, Cu, Zn, As, Sn, Pb. Nanofiltration membranes rejected heavy metals much better than chloride, sulfate and TOC, of which concentration in synthetic wastewater was higher than that of heavy metals. To consider rejection characteristics of various metals by nanofiltration membranes, separation coefficient, which is the molar conductivity ratio of the metal permeation rate to the chloride ion or TOC permeation rate, was introduced. In spite of different materials and different nominal salt rejection of nanofiltration membrane used, the separation coefficients of metals were nearly the same. These phenomena were observed in the relationship between the molar conductivity and the separation coefficient for heavy metals.

• Membrane Journal
• /
• v.17 no.4
• /
• pp.311-317
• /
• 2007

Proton conducting crosslinked membranes have been prepared by polymer blending, which consist of poly(vinyl alcohol-co-ethylene) (PVA-co-PE) and poly(styrene sulfonic acid-co-maleic acid) (PSSA-co-PMA) at 50 : 50 wt ratio. Two kinds of PSSA-co-PMA copolymer with 3 : 1 and 1 : 1 the molar ratio of PSSA to PMA wereused as a proton conducting source. The ethylene content of PVA-co-PE was also changed as 0, 27 and 44 mol%. The membranes were thermally crosslinked via the esterification reaction between -OH of PVA and -COOH of PMA, as demonstrated by FT-IR spectroscopy (PVA-co-PE)/(PSSA-co-PMA) membranes with 3 : 1 the molar ratio of PSSA to PMA showed higher ion exchange capacity (IEC), lower water uptake and higher proton conductivity than those with 1 : 1 molar ratio. As the PE concentration increased, the IEC values, water uptake and proton conductivities decreased continuously. These properties were elucidated in terms of competitive effect between the concentration of sulfonic acid, hydrophilicity and the crosslinked structure of membranes.

• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.307-312
• /
• 2009

The block-co-polymer type thermosetting polysiloxane coordinated with metal oxide was synthesized to investigate the effect of metal oxide on the dispersity of metal powder in the polysiloxane/metal composite material. The metal powder in the polysiloxane/metal composite materials is better dispersed with metal oxide complex polysiloxane than the case without metal oxide. To understand the effect of quantities of metal oxide on the polysiloxane chain, the various polysiloxanes with different ratios of block unit were synthesized. Electrical conductivity was interpreted by percolation threshold theory to understand the dispersity of dense composite. The behavior of conductivity was in good agreement with theoretical value. The critical value was decreased as the quantities of metal oxide are increased. As a result, as the metal oxide increased on the polymer chain, the dispersity of metal filler was increased.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.979-984
• /
• 1998

The conducting composites were prepared by blending of polyaniline(PANI) as conducting polymer and nylon6,6 as matrix in m-cresol. The PANI was protonated with alkylbenzenesulfonic acid such as camphorsulfonic acid(CSA) or dodecylbenzenesulfonic acid(DBSA). The miscibility of the composites was improved and the electrical conductivity was increased by adding dioctylphthalate(DOP). The electrical conductivity of the composites depending on the amount of protonating agent and PANI complex and the morphology were investigated. When it was protonated with DBSA having long alkyl chain and the content of PANI complex was 25 wt%, the electrical conductivity of the compsosite was increased up to 1.02 S/cm.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.287-292
• /
• 1999

The conducting composites were prepared by solution blending of polyaniline (PANI) as a conducting polymer and polycarbonate (PC) as a matrix in chloroform. Also the composites film was prepared by solution casting method. The PANI was protonated with alkylbenzenesulfonic acids, such as camphorsulfonic acid (CSA) or dodecylbenzenesulfonic acid (DBSA). The electrical conductivity of composites prepared by solution casting was enhanced compared with that of compression molding. The electrical conductivity, tensile strength and morphology were observed as a function of the amount of protonating agent as well as PANI complex content. In general, as the PANI complex content was increased, the electrical conductivity increased. In the case of the composite film containing 25 wt % of PANI complex doped with DBSA, the electrical conductivity exhibited 3.18 S/cm.

• Journal of the Korean Chemical Society
• /
• v.49 no.6
• /
• pp.560-566
• /
• 2005

Sintered ceramic samples of pure and some copper doped layered sodium lithium tri-titanate ($Na_{1.9}Li_{0.1}Ti_{3-X}Cu_XO_{7-X}$) materials with different dopant molar percentages (0.0$Cu^{2+}$ at $Ti^{4+}$ sites in the lattice is proposed in this paper. Furthermore, three distinct regions have been identified in log(${\sigma}_{d.c.}T$) versus 1000/T plots. The lowest temperature region is attributed to electronic hopping conduction(polaron) for all copper doped derivatives and ionic conduction for lithium substituted $Na_2Ti_3O_7$.The mechanism of conduction in the intermediate region is associated interlayer ionic conduction and in the highest temperature region is associated modified interlayer ionic conduction.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.427-434
• /
• 2012

Waterborne polyurethane dispersions (PUD) were synthesized from poly (carbonate diol), isophrone diisocyanate and dimethylol propionic acid at different NCO/OH molar ratios. Subsequently, the PUD was mixed with different types of alkali metal salts ($LiClO_4$, $NaClO_4$, and $KClO_4$) to prepare antistatic waterborne polyurethane coating solutions. Effects of the types and amounts of alkali metal salts were investigated on the surface resistances of the resulting coating films. The surface resistances of coating films were decreased with increasing the amounts of alkali metal salts added in the PUD. The coating films prepared with the same amount of alkali metal salts showed increased ionic conductivity with the order of $LiClO_4$ > $NaClO_4$ > $KClO_4$. Also, the surface resistances of coating films were increased with increasing the molar ratios of NCO/OH in the PUD.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.923-928
• /
• 1999

Polycarbonate(PC)/polypyrrole(PPy) conducting composites were prepared by precipitation polymerization. $FeCl_3$, pyrrole and chloroform were used as oxidant, monomer, and solvent, respectively. The electrical conductivity was increased with increasing the amount of PPy, while the mechanical property was decreased. When the PPy content was 25 wt %, the electrical conductivity of the composites was increased up to 0.23 S/cm. The electrical conductivity, the stability of conductivity in air and mechanical properties of the composites of different PPy content were investigated and the morphology of the composite films was observed.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.281-286
• /
• 1999

The conducting composites were prepared by blending polypyrrole (PPy) as a conducting polymer and nylon6,6 as a matrix. In chemical polymerization of PPy, the oxidizing agent was $FeCl_3$ and dopant was alkylbenzenesulfonic acid, such as camphorsulfonic acid (CSA) or dodecylbenzene sulfonic acid (DBSA). The electrical conductivity and mechanical properties were measured for the amount of dopant and PPy complex, and these morphology observed. When it was doped with DBSA having long alkyl chain and added the PPy complex of 25 wt %, the electrical conductivity was increased up to 0.64 S/cm.