• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.91-97
• /
• 2004

In this paper, we conducted basic study on the reliability management that is a key factor to develop highly-reliable launch vehicles, and proposed the strategy for reliability management that can be applied to the KSLV program. Based on the analysis of international launch vehicles data, this paper also presented the reliability target that is essential for Korea's entering into the international commercial market.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.5
• /
• pp.507-512
• /
• 2011

This study is concerned with the reliability analysis and its based design of midship section against the ultimate bending strength. Eight bulk carriers and seven oil tankers over 100m length are chosen for the present study. Target reliability indices for the two ship types have been derived based on the results reliability analysis of the present ship models. Reliability-based structural design codes are proposed for use in design of midship section of bulk carriers and oil tankers. The design codes proposed in this study have been successfully applied to re-design of midship section of the present ship types. It has been found that the proposed codes can provide more uniform structural design results.

• Journal of the Korean Society for Railway
• /
• v.11 no.4
• /
• pp.390-397
• /
• 2008

Quantitative RAM (Reliability, Availability, Maintainability) is the one of the important indicator that shows the quality of rolling stock. It is usually required in the domestic and abroad purchase specification of rolling stock. And achieving and demonstrating the quantitative RAM goals is also required. In this study, the method to set up these goals will be proposed in the aspects of service and logistic reliability, operational, achievement or inherent availability and maintainability. And we apply this proposed method to the real operation data.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.458-464
• /
• 2020

Calibration of load-resistance factors for the limit state design of perforated caisson breakwaters are presented. Reliability analysis of 12 breakwaters in nationwide ports was conducted. Then, partial safety factors and load-resistance factors were sequentially calculated according to target reliability index. Load resistance factors were optimized to give one set of factor for limit state design of breakwater. The breakwaters were redesigned by using the optimal load resistance factor and verified whether reliability indices larger than the target value. Finally, some load-resistance factors were proposed by changing target reliability index.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.12
• /
• pp.1193-1200
• /
• 2008

The procedure of design for reliability which consists of reliability analysis and Failure Modes and Effects Analysis(FMEA) is established and reliability assesment is performed for the nano-satellite air-launching rocket, Mirinae II. By means of using the reliability analysis result, the feasibility to insert the Mirinae II to the target orbit for given mission time under operating environment is assessed. During the reliability analysis process, the system is categorized by Work Breakdown Structure(WBS), and reliability structure is defined by both Reliability Block Diagram(RBD) and schematics of the system. FMEA is used to determine the risk priority number of components and parts. The target reliability is satisfied by changing the design of components and parts with high-risk, hence the design for reliability to put the satellite in to the target orbit safely has been performed.

• Proceedings of the Korean Reliability Society Conference
• /
• 2002.06a
• /
• pp.211-216
• /
• 2002

실제적인 문제에서 신뢰성 기반 최적 설계(RBDO)를 구현하기 위해서는 유한요소 모델을 해석하기 위한 상용 프로그램과 설계한 것에 대한 신뢰성을 산정할 수 있는 프로그램을 통합하고 최적화 알고리듬을 적용하여야 최적화를 수행하여야만 한다. 또한 최적화 과정에서 최적상태에서 제약조건이 비활성 영역에서 놓이게 되는 것을 방지하기 위해서 제약조건 최적화 문제를 비제약 조건 최적화 문제로 바꾸어 주는 장애 함수를 사용하여 최적화를 수행하였다. 그리고 이 방법론을 기존의 신뢰성기반 최적화 방법론, 즉 신뢰도지수 접근방법과 목표성능치 접근방법과의 비교를 하였다.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2753-2755
• /
• 2001

소프트웨어 신뢰도에서 지금까지 여러 연구자들이 적용한 가정사항은 프로그램의 고장율이 잔여결함의 미지수에 대한 일정한 배수라고 한 것이다. 이는 모든 결함이 프로그램의 고장율에 동일한 양으로 기여한다는 것을 의미한다. 우리는 이 가정에 대해서 대안을 제시한다. 제안된 모델은 잔여결함을 중시하는 전의 것에 비하여 고장수정을 조기에 수행할 수 있게 함으로써 신뢰성 향상에 커다란 효과가 있다. 이 결함들이 전체적인 고장율에 가장 큰 공헌을 하기 때문에 그들 자신이 일찍이 나타나서 곧 수정될 수 있다는 장점이 있다. 모델은 취급하기가 쉬워서 다양한 신뢰도 척도를 계산할 수 있다. 목표 신뢰도를 얻기 위한 전체 수행시간과 목표 신뢰도를 얻기 위한 총 결함의 수를 예측할 수 있다.

• Journal of the military operations research society of Korea
• /
• v.35 no.3
• /
• pp.31-45
• /
• 2009

Reliability should be done from the initial stage of development to secure performance and safety of system. To establish and achieve target reliability of a system, reliability should be allocated into the subsystems. In the acquisition and development of a system, frequent failures will cause a negative effect on performing mission and occurs increasing operating cost. This study reviewed and evaluated the existing reliability allocation models using operation and maintenance costs to find the correlation between reliability allocation models and its operating cost. A target system reliability on the diesel engine to be developed for naval vessels is allocated into its subsystem based on the existing reliability allocation models. A selection methodology for reliability allocation models was made to minimize operating cost by using simulation based on the given operating diesel engine data for naval vessels.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.513-520
• /
• 2001

신규개발장비에 대하여 사용자가 제시한 RAM-D 요구조건을 만족하기 위한 하부 체계의 RAM-D 설계목표 설정 절차 및 방법에 대하여 기동무기체계의 대표적 장비인 전차를 대상으로 연구하여 RAM-D 요소별 할당 모델을 개발하였다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1997.11a
• /
• pp.185-190
• /
• 1997

1991년 7월, 미국원자력규제위원회(USNRC)에서 발표한 미국 정비규정1은 5년간의 준비 기간을 거쳐 1996년 7월에 모든 미국 원자력발전소 (이하 "원전"이라 칭함)에 적용되기 시 작하였다. 정비규정의 일부 내용을 간추려 보면 다음과 같다. "모든 원전은 산업체 경험을 고려하여 주요 구조물, 계통, 그리고 기기(Structure, System, Component: SSC)에 대한 성능목표(Performance goal)를 수립해야하고 수립된 목표에 대해 SSC의 상태 또는 성능을 감시(monitoring)해야만 한다. SSC의 성능 또는 상태가 목표와 다를 때는 적절한 보완 조치 가 취해져야 한다". (중략)