• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.218-222
• /
• 2003

본 연구의 목표는 난연화를 위한 기존 공법의 단점 보완과 환경 친화적인 난연제를 사용한 비 난연 XLPE 케이블의 난연화 방법과 최적의 난연 코팅액 배합에 있다. 전력용, 통신용 둥과 같이 고난연성이 요구되는 경우 기존 컴파운드 방법으로는 난연제를 다량으로 첨가하여 사용하며, base polymer와의 혼합성, 기계적인 물성에도 영향을 끼쳐서는 안 되는 등 여러 가지 요구 조건을 만족시켜야 하는 문제점을 가지고 있다. 각 난연 코팅액에 따른 코팅 표면을 고찰한 결과 모든 코팅의 표면은 깨끗하였으며, 코팅층의 두께는 약 10-20㎛로 일정하게 코팅이 되었다. TBBA/Sb₂O₃, TBBA/Zinc Borate의 무게비(wt%)가 1:0.7 이상부터 난연 효과를 보였다. 또한 Mg(OH)₂/Zinc Borate의 경우는 무게비(wt％)가 1:0.5, 1:0.6에서 난연효과를 보였으나, 1:0.7 이상에서는 난연 효과가 떨어지는 현상을 보였다. Mg(OH)₂/AF100 S/Zinc Borate의 경우는 AF100 S의 첨가량이 증가할수록 난연성이 향상되었다. 난연 코팅액의 열 분해 거동을 비교한 결과, Mg(OH)₂/Zinc Borate의 경우 초기 분해 온도가 유기계 난연제를 사용하였을 경우보다 늦어졌으며, 최종 잔류 탄화물 양도 많이 생성되었다. Mg(OH)₂/AF100 S/Zinc Borate의 경우 난연 효과를 상승을 위해 인계 난연제(AF100 S)를 첨가하였으나. 오히려 초기 분해온도가 빨라졌으며 잔류 탄화물의 양도 적게 나타났다. 그러나 연소 테스트 결과 가장 우수한 난연 효과를 보였다.

• Korean Journal of Biological Psychiatry
• /
• v.4 no.2
• /
• pp.259-264
• /
• 1997

The authors performed this preliminary study to investigate the effect of softening E.C.T. and propofol was compared to pentothal for induction of anaesthesia for E.C.T. on seizure duration. The results were follows ; 1) E.C.T. was performed in 60 psychiatric inpatients who were admitted during the study period. Of them 51.7% were diagnosed as schizophrenia, 21.6% as major depressive disorder, 16.7% as bipolar I disorder, manic and 10% of others. 2) Mean number of E.C.T. was 12.2 times a patient. 3) The most common target symptoms were persecutory delusion in schizophrenia, psychomotor retardation or agitation in major depressive disorder, and violent aggressive behavior in bipolar I disorder, manic. 4) Pre-ECT medication usually used were atropine $0.0093mgkg^{-1}$, pentothal $2.76mgkg^{-1}$ or propofol $1.42mgkg^{-1}$. 5) The duration of seizure, as measured clinically, was reduced with propofol(20.5 sec) in comparison with pentothal (35.7 sec)(p<0.001). This suggests the possibility that additional treatments may be needed for the same clinical effect in psychiatric illness when propofol is used as the induction agent.

• Journal of the Korean Society for Railway
• /
• v.18 no.3
• /
• pp.175-185
• /
• 2015

Generally, in the train area, switch tracks have required high reliability because this system is directly associated with derailment. Especially, switch tracks of Maglev vehicles must be moved in terms of the whole geometric characteristics, in which the bogies are encased in the switch track. For this reason, switch track was constructed with steel lighter than concrete girders. But, the steel switch track was weak because of structural vibration as well as structural deformation. Therefore, it is important to predict the levitation stability when a vehicle passes over flexible switch track. The aims of this paper are to develop a coupled dynamic model to describe the relationship between a Maglev vehicle and switch track and to predict the levitation stability. In order to develop the coupled dynamic model, a three dimensional vehicle model was developed based on multibody dynamics; a switch model was made using the modal superposition method. And, the developed model was verified using comparison measured data.

• 한국사회정책
• /
• v.23 no.2
• /
• pp.113-139
• /
• 2016

This article tries to compare exchange relations between welfare and dictatorship in the East Germany and the North Korea. Unlike capitalist welfare aiming at correcting market results socialist welfare has been proposed to satisfy people's basic needs, but it had operated as instrument of dictatorship. Relation between welfare and dictatorship could be distinguished as hard exchange and soft one in line with social construction of welfare. Welfare-dictatorship relation in East Germany had developed from its formation(1949-1970s), crisis(1980s) and dissolution(1989-1990). There had established hard exchange relation in which the legitimacy of dominance had debted to welfare as social rights. While crisis of the exchange relation had been modest in a form of insufficient supply of consumption goods, it was one of the elements of collapse of dictatorship, leading to the unification with West Germany. The journey of the exchange relation in North Korea can be characterized by its formation(1948-1980), crisis(1990s-2000s), and transformation(2010s). Unlike East Germany, welfare was socially constructed as gift form the ruler to the ruled, which made the combination of welfare and dictatorship loosely coupled. Although economic crisis was severe compared to East German one the rulers have succeeded maintaining dictatorial dominance by creating dual exchange relation. They separated core group and subordinated one supporting the former at the expense of the latter. They blocked out most of the people from soft exchange relation making bad use of muddling-through life style dependent on market activities. This strategy led to a 'dictatorship neutral welfare extinction'. Taking the high degree of institutionalization of newly establishing welfare-dictatorship relation into account, lives of most people are hardly expected to be improved by gift by their rulers even if North Korean economy will recover in the future.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.3
• /
• pp.461-467
• /
• 2016

In order to install the floating transport type wind-turbine foundation, water pumping is used to sink the foundation. During this process, its mass and center of gravity, and buoyancy center become continuously changed so that the dynamic stability of the floating foundation become unstable. Dynamic stability analysis of the floating foundation is a complex problem since it should take into account not only the environmental wave, wind, and current loads but also its weight change effect simultaneously considering six-degree-of-freedom motion. In this study, advanced numerical method based on the coupled computational fluid dynamics (CFD) and multi-body dynamics (MBD) approach has been applied to the dynamic stability analysis of the floating foundation. The sloshing effect of foundation internal water is also considered and the floating dynamic characteristics are numerically investigated in detail.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.6
• /
• pp.61-68
• /
• 2007

The hole for the insertion of the pin in the shank is exist at ball joint connection of the space frame. It brings about the brittle fracture caused by stress concentration. Consequently it cannot expect the deformation performance or energy absorption performance from ball joint connection. In this study we developed a new connection details which will increase the plastic deformation performance at ball joint connection and can absorb the error in construction, which expect the plastic deformation performance at the reduced shank without brittle fracture at the screw of bolt and pin. Also it's capacity is verified by the performance in numerical analysis and test. We confirmed bolt's plastic deformantion performance through controled shank and pin's area.

• Korean Security Journal
• /
• no.53
• /
• pp.11-33
• /
• 2017

Terrorism has existed in the entire human history and has become a significant topic in criminology while prior studies has focused on North Korea as the perpetrator, and this prevents an in-depth discussion of the international trends of terrorism. As soft targets are the main target of new terrorism and because we never ignore the significance of the consequences, there are needs for more studies on the topic. This study conducted a case study of major terrorism attacks and surveyed professionals in the field via an AHP analysis in order to find the characteristics of terrorism and its potential patterns in South Korea. As a result, we found that North Korea or the left-wing may utilize homemade bomb, motor vehicle or drone for the purpose of attacking multi-use facilities in South Korea. For policy implications, we insist developing a better CPTED approach on those facilities, improving professionalism of cyber-watchdog via more training and education, stricter control on drone permit, and operation of counseling centers for preventing radicalization.

• Journal of the Korea Concrete Institute
• /
• v.22 no.1
• /
• pp.11-18
• /
• 2010

In this study, a procedure of performance-based design for the seismic retrofit of reinforced concrete columns strengthened by steel jackets has been presented. In order to predict the target displacement of retrofitted columns, a nonlinear analysis of reinforced concrete columns retrofitted with steel jackets has been developed based on a segmental model with the fiber cross-sectional approach. The seismic displacement level of retrofitted columns is estimated both by the direct displacement-based design method and by the displacement coefficient method. In examples of seismic retrofitted columns, the current seismic retrofit procedure gives good results in improvements of displacement levels and displacement ductilities of retrofitted columns.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.4
• /
• pp.49-57
• /
• 2010

This study is the research appling the representative Displacement-Based Design which is the basic concept of Direct Displacement Based Design proposed by Chopra and Goel to original Reinforced Concrete structure and determining the thickness of retrofit Steel Jacket about the Maximum design ground acceleration, and developing the more improved Algorithm as well as program by the Retrofit Design method and Nonlinear analysis by the Performance design method before and after reinforcement appling the determined retrofit thickness. To predict the target displacement of retrofitted columns, a nonlinear analysis model of reinforced concrete columns has been developed to be based on the nonlinear fiber cross-sectional and segmental analysis model, and the seismic displacement level of retrofitted columns is estimated by two procedures, the direct displacement-based design method and the displacement coefficient method. In examples of seismic retrofit design, the current seismic improved design method gives good results in improvements of displacement levels and displacement ductilities of retrofitted columns.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.425-430
• /
• 2019

Zinc coatings are widely used because of their environmental friendliness and high performance. In general, the coating temperature is a major factor in determining the coating layer thickness and coating quality. In the case of a zinc coating, a uniform and appropriate coating temperature is required. In this study, a thermal flow simulation of the air flow was performed to analyze the temperature distribution of a zinc spray coating room in a natural convection state. Using SolidWorks, modeling was performed for two spray coating rooms, a preheating room, and a drying room, and a thermal flow coupled analysis was performed using ANSYS-FLUENT. As a result of the analysis, the temperature distribution characteristics in the spray coating rooms were determined. It was found that the present temperature was below the target temperature of $25^{\circ}C$. Simulations were conducted for two different boundary conditions (one with a heater added and another with the open part closed). The simulation results show that the method of closing the open part is better than adding the heater.