• Journal of the Korean Wood Science and Technology
• /
• 제13권3호
• /
• pp.49-53
• /
• 1985

The effects of pre-treatments, the hot water extraction of wood meal and the addition of chemical ($CaCl_2$) to wood-cement water system on the properties of wood-cement composite such as modulus of rupture (MOR), modulus of elasticity (MOE), water sorption ratio and swelling ratio of resulting boards were studied in this experiment. The wood meals through 0.83mm(20 mesh) and retained on 0.42mm(35 mesh) screen were prepared from Pinus densiflora S. at Z. and Larix leptolepsis G. For hot water extraction, 500 grams of wood meal for each species were heated to boiling with 1,500ml of distilled water in 2-liter beaker for 6 hours. Every 2 hours, the wood meals were washed with boiling distil1ed water and reheated to boiling again. After 6 hours boiling, the boiled wood particles were collected by pouring this particles on 200 mesh screen. The collected particles then washed twice with hot distilled water and dried for 24 hours in an oven at $109{\pm}20^{\circ}C$. A mixture of 663.4 grams of cement with 331.7 grams of wood meal based on oven-dry weight were dry-mixed in a plastic vessel. The mixture was kneaded with 497.6ml of distilled water in the ratio of 1.5ml of water to a gram of wood meal. To add calcium chloride to the mixture as an accelerator, $CaCl_2$ 4% solution by weight per volume, was added to pine-or larch-cement board in the ratio of 3% to cement weight. To set wood-cement board, this mixture was clamped at 30cm ${\times}$ 30cm, in thickness of 1.5cm for 3 days at room temperature, declamped and then placed at open condition for 17 days. The target density was 1.0. The four specimens sized to 5cm in width and 28cm in length were used for MOR and MOE test for each treatment. After MOR test, the tested specimens were cut to the size of 5cm ${\times}$ 5cm for water sorption and swelling test. The twenty specimens used to measure the water sorption ratio (soaking 24 hours) and ten of these were used for swelling ratio measurement The results obtained were as follows: 1) Larch was not suitable for wood-cement boards because larch-cement board developed no strength, but pine showed 97.9kg/$cm^2$ by hot water extraction. 2) To increase MOR, hot water extraction was more effective than the addition of $CaCl_2$ in pine and larch because the $CaCl_2$ addition was seemed to speed up the ratio of cement hydration without reacting with the wood substances. 3) The water sorption ratio was lowered by the addition of $CaCl_2$ to wood-cement system because the chemical additive accelerated the rate of cement hydration. 4) In pine-cement board, the swelling ratio from 0.37 to 0.42 percent was observed in length and the swelling ratio from 0.88 to 2.0 percent in thickness. As a rule, the swelling ratio of wood-cement board was very low and the swelling ratio in thickness was higher than in length.

• Journal of the Korean Wood Science and Technology
• /
• 제38권6호
• /
• pp.507-517
• /
• 2010

2006 IPCC 가이드라인에서 제안한 HWP 탄소계정 방법을 이용하여 HWP 내 탄소 저장량을 추정하였고 우리나라 국가 온실가스 인벤토리와 산림 부문에 미칠 영향을 분석하였다. 사용 중에 있는 제재목, 목질보드류, 기타 산업용 목재, 종이 및 판지를 대상으로 하여 목제품 내 탄소저장량의 변화량을 추정하였다. 1970년부터 2008년 동안 사용 중에 있는 목제품 내 이산화탄소 저장량의 연간 변화량은 접근법에 따라 -9,023 Gg $CO_2$/yr에서 4,052 Gg $CO_2$/yr으로 추정되었다. 우리나라는 목제품의 순수입국이기 때문에 탄소 축적 변화 접근법이 가장 유리한 결과를 보였다. 그러나 각 접근법이 목제품의 벌채량 및 교역량, 바이오에너지로의 목재 이용과 재활용에 미치 는 영향은 상이하게 나타나고 있다. 따라서 계정 방법에 대한 우리나라 입장을 결정할 때 국가 온실가스 인벤토리에 대한 영향뿐 아니라 미래에 추진할 산림정책 방향도 고려하여 야기될 수 있는 부정적인 영향을 최소화하는 방법을 선택해야 한다.

• Journal of the Korean Wood Science and Technology
• /
• 제42권3호
• /
• pp.309-317
• /
• 2014

수확된 목제품(Harvested Wood Products, HWP)이란 제재목, 합판, 파티클보드 또는 목구조재, 건축내장재, 가구, 종이제품 등과 같이 나무를 원료로 사용하여 가공한 제품을 말한다. HWP는 수명을 다하여 폐기될 때까지 산림에서 생장하면서 저장했던 탄소를 장기간 제품 내에 저장하고 있기 때문에 대기 중의 이산화탄소 농도를 안정화시키는 효과를 발휘한다. 이러한 이유로, 탄소계정 시 목제품의 탄소저장효과를 인정해야 한다는 의견들이 지속적으로 제기되어왔다. 2011년 11월 더반에서 열린 17차 기후변화협약 당사국총회(COP)에서는 자국산 목재 만을 대상으로 하는 생산접근법을 HWP의 탄소계정방법으로 결정하였다. 이에 본 연구는 향후 국가 간 논의 및 협상에 대응하고자 국산 HWP 탄소계정에 필요한 인자인 반감기를 결정하기 위하여, 외국의 반감기 결정사례를 조사하고 국산 HWP 반감기 결정을 위해 필요한 요소를 분석하였다.