• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.914-917
• /
• 2008

This paper was to discuss the case and cause of debonding defect of wood floor board in apartment house by investigating actual survey. Most frequent defect in wood floor board was debonding of floor board. Scratch, gap and crack of floor board were also found in floor board installment work. Causes of debonding of floor board is shrinkage of cement mortar beneath floor board and expansion of floor board. Haste in floor board work did not provide enough time to dry cement mortar fully, which led to continue to dry after the installment of floor board. It caused moisture movement toward wood floor board. Accordingly, Before floor board work, careful consideration on moisture condition of cement mortar and enough curing time to eliminate the effect of moisture are taken into.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.4
• /
• pp.393-404
• /
• 2023

This research evaluates the antibacterial and transparency properties of UV-curable paint augmented with 20wt% copper particles. The transparency assessment indicated that the paint maintained a total luminous transmittance of 90% or above, thereby matching or surpassing the performance of standard UV-curing paints. To further test its antibacterial capabilities, wooden flooring boards were coated with the UV-curable paint laced with 20wt% copper particles, which had been surface-modified with a silane coupling agent. Following the fatigue tests of these treated boards, an impressive bacterial reduction rate of 99.9% was noted after a span of 6 hours, demonstrating the paint's exceptional antibacterial performance.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.165-171
• /
• 2002

This study was to investigate the adhesion properties of fancy veneer and base panels and formaldehyde emission of wood-based floorings bonded with urea-melamine formaldehyde adhesives. We focused on stoichiometric mole ratio of reactive functional groups. The urea-melamine formaldehyde adhesives were made at twelve different formaldehyde/urea-melamine mole ratios. The interlaminated shear strength and formaldehyde emission of wood-based floorings bonded with selected adhesive among these adhesives were examined. The results showed that the bonding properties were high and the formaldehyde emission was low as the adhesive consisted of stoichiometric mole ratio of formaldehyde/urea-melamine. Interlaminated shear strengths of HDF(High Density Fiberboard) flooring were over 14 kgf/cm² at all mole ratios. At the mole ratio of 1.0, HDF flooring showed low value of formaldehyde emission of 953 mg/L. Interlaminated shear strengths of Plywood flooring were high, 14.02 kgf/cm² at mole ratio of 1.4. At the mole ratio of 1.0, Plywood flooring showed low value of formaldehyde emission of 0.26 mg/L.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.171-172
• /
• 2017

There is some recognition that Decoration Wood-based Flooring Board in Korea is a material that inhibits the heat transfer from the substrate to the room. There is a lack of substantial research literature on the surface heat transfer and condition of Decoration Wood-based Flooring Board, which is insufficient to deal with false perceptions. In this study, the purpose of this study is to analyze the surface heat transfer characteristics of Decoration Wood-based Flooring Board and to obtain basic data to cope with recognition.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.4 s.132
• /
• pp.23-29
• /
• 2005

The fancy veneer flooring board is high value-added wooden material. The classification of the flooring boards by the observation with the naked eye causes color difference among fancy veneers. It turned out that this inaccuracy of color difference among fancy veneers increased in case of the identification by metamerism or the flooring construction. Therefore, this study was performed to classify fancy veneers produced from 3 species such as Tilia sp., Betula sp., and Acer sp. which were identified with the naked eye by Light and Dark grade, by using CIELAB. In addition, each specie's threshold on CIERGB was investigated and a range of hue, saturation and intensity by an application of HSI color model were studied. Intensity of the HIS color model could be the best value to be used when color, saturation and intensity of the HSI color model were used for the classification of the flooring board's color. In addition, it seemed that color range of all three criteria lied between $45^{\circ}$ and $55^{\circ}$. In the case of identification by threshold of RGB element, considering only specific color element value is unlikely to lead to accurate classification of fancy veneers of flooring board.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.388-396
• /
• 2009

In our study, the potential of okara as an ingredient of new bio-based adhesives was investigated for the production of fancy-veneered flooring boards. Okara was hydrolyzed by 1% sulfuric acid solution (AC) and 1% sodium hydroxide solution (AK). Phenol formaldehyde (PF) prepolymers were prepared as a cross-linker of okara hydrolyzates. Then, okara-based adhesive resins were formulated with 35% AC, 35% AK and 30% PF prepolymer on solid content basis. The adhesive resins were applied on high-density fiberboards (HDF) with the spread rate of $300g/m^2$. After that, oak fancy veneers are covered on the HDF, and then pressed with the pressure of $7kg/m^2$ at $120^{\circ}C$. The experimental variables were three mole ratios of formaldehyde to phenol (1.8, 2.1, 2.4), three assembly time (0, 10, 20 min), and two press time (90 sec, 120 sec), respectively. The fancy-veneered high-density fiberboards were tested by dry tensile strength, glueline failure by wetting and formaldehyde emission. Tensile strength of the boards exceeded the requirement of KS standard. The formaldehyde emissions were approached at the E0 level specified in KS standard. Based on these results, okara can be used as an ingredient of environmentally friendly adhesive resin systems for the production of flooring boards.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.1
• /
• pp.53-60
• /
• 2018

For test on flooring board laminated with PVC decoration materials in order to replace the current surface materials such as HPL in decoration wood-based flooring board. the Results of comparison and analysis are as follows: For thermal conductivity, flooring board decorated with PVC did not show huge differences when temperature was rising and lowering compared to the flooring materials laminated with the existing HPL surface materials. It seems the most meaningful results for using it as indoor flooring materials. That is, in Korea where there is the culture focusing on ondol heating, use amount of heat energy and efficiency of flooring materials are very important and sensitive issues, involving immediately with household economy of final consumers, and it might be a criteria to judge basic performances required as flooring materials. As a result of the analysis on mandatory durability test items such as abrasion resistance, absorption width expansion rate, impact resistance, surface hardness, and impact absorption for flooring materials, compared to flooring board laminated with general HPL surface decoration materials, decoration wood-based flooring board laminated with PVC surface decoration materials which is higher abrasion resistance with smaller transformation and has better durability and impact absorption of the surface, is available for actual application as indoor flooring board, and for replacing surface decoration materials impregnated with heat-hardened resion such as HPL.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.213-214
• /
• 2019

Oriented strand board(O.S.B) is used in many areas, such as interior and interior finishes of wooden houses, but no cases and studies have been used as flooring materials for flooring boards. In this study, we will examine the quality and performance of the aromatic strands board, which we believe can be substituted for the plywood, and analyze its suitability as a floorboard.

• Journal of the Korea Furniture Society
• /
• v.13 no.1
• /
• pp.27-37
• /
• 2002

This study was investigated with the surface properties such as physical and accelerated tests of wood-based floorings. In physical test, hardness and abrasion resistance values of laminate floorings were higher than those of others. The center line average surface roughness($R_a$) of imported laminate flooring was highest value($1.34{\mu}m$) and that of imported solid wood flooring was lowest value($0.62{\mu}m$). In cold resistance and moist heat resistance, no defects were found on the surface of all flooring (crack, blistering, peeling, and gloss loss etc.) after testing. Wet-cold-dry cycle test showed that plywood flooring appeared some cracks. In accelerated weathering test, color difference increased with increasing Xenon arc light irradiation