• Journal of Korean Society of Forest Science
• /
• v.95 no.1
• /
• pp.60-72
• /
• 2006

The aim of this paper is to identify and evaluate relations for forest greening and the firewood substitution for home use after 1945 Liberation of Korea. Korea faced serious forest degradation by the early 1960s due to the enormous firewood consumption, which was about ten million cubic meters annually, for home use. If the trend of firewood consumption was maintained until 1955's, the total forest area in Korea could be thoroughly degraded within 10 years. The firewood substitution for home use had to be solved as soon as possible. For this purpose, energy sector by the Ministry of Commerce and Industry carried out the substitution policy for home using the briquettes which was the only natural resources for energy produced in Korea. Firewood was prohibited being carried in the major cities by forestry sector, the Ministry of Agriculture and Forestry, from 1958. Only 5.2% of household in the cities used the forest products consumed as a fuel in 1970 because these inter-sectoral substitution measures of firewood for home use turned out a success gradually. After the 1970s, firewood consumption for home use was naturally decreased due to rural people's explosive move to cities, who were major consumers of firewood for home use at that time. Firewood for cooking was substituted by LPG gas after 1985 and firewood for house heating was substituted by coal and oil after 1980. Finally, on the basis of the firewood substitution for home use, the forest degradation that lasted over one hundred years was put a period.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.842-846
• /
• 2004

Both traffic congestion and air pollution in the metropolitan area can be greatly relieved by promoting the use of public transportation with zero emission system. Bus and subway are very convenient means for the people moving in the route areas. But they are not enough to satisfy handicapped or old people to have access to them and also do not solve environmental problems completely. New vehicle system, fuel cell track rapid transit, will be introduced as a countermeasure for such problems in the present paper.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.320-325
• /
• 2005

Power of fuel cell tram is supplied by only fuel cell system or hybrid system of fuel cell and battery/super capacity. Fuel cell is operated by hydrogen, which is fed directly from hydrogen tank or by reforming gasoline or methanol into hydrogen. Power system is preferred with hybrid of fuel cell and battery/super capacity since it improves total energy efficiency through interaction of hybrid components and restores energy regenerated by braking. Also, power supply system by fuel cell hybrid should be designed to output optimum energy efficiency depending on driving mode of fuel cell tram.

• Journal of the Korean Institute of Gas
• /
• v.17 no.5
• /
• pp.81-86
• /
• 2013

Accidents of dust explosion has been occurred in various industries as a plastics, pharmaceuticals, timber, grain storage, solid fuels and chemicals. In this study, the silo dust, hammer mill dust and Nyusong dust in the manufacturing process of the particle board to utilize west wood, which were selected for this experiment and were evaluated the characteristics of dust explosion. The explosion characteristics such as a maximum explosion pressure, explosion index, lower explosive limit, and minimum ignition energy in suspended dust of the wood by Siwek 20 L apparatus were measured and evaluated for the experiment. The results of this study can be used the process safety measures to prevent accidents of fire and explosion in the suspended dust of wood.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.360-369
• /
• 2016

In this study, sequential leaching and wet torrefaction were performed to improve the fuel characteristics of empty fruit bunch (EFB). Leaching was carried out at $25{\sim}90^{\circ}C$ for 5~30 min. The highest ash removal efficiency of 55.99% was achieved when leaching was performed at $90^{\circ}C$ for 10 min. The ash removal efficiency was dependent more on leaching temperature than time. Wet torrefaction was carried out at $180{\sim}200^{\circ}C$ for 5~40 min, following the leaching. Most of the inorganic compounds were removed at removal efficiencies of 41.05~63.58% during sequential leaching and wet torrefaction, while silica remained in the biomass. Chloride, calcium, magnesium, and phosphorus showed more than 80% removal efficiencies. The calorific value of EFB increased to 7.96% (4730 kcal/kg) in comparison to the raw material (4390 kcal/kg) when wet torrefaction was performed at $200^{\circ}C$ for 40 min following leaching.

• New & Renewable Energy
• /
• v.10 no.2
• /
• pp.12-18
• /
• 2014

The objective of this work is to produce solid biofuel from sawdust using the HTC (Hydrothermal carbonization) process. The HTC process of feedstock involves the raw material coming into contact with high temperature and pressurized water. The HTC process could produce gaseous, liquefied and solid products, but this study focused on solid product only as an alternative to coal. In this study, sawdust used for a feedstock and its moisture content was under 5%. Water was added with the feedstock to raise moisture content to 80% and also used catalysts. The HTC process was performed at temperature range from 200 to $270^{\circ}C$ and reaction time was 15 to 120 min. Rising temperature resulted in increasing the higher heating value (HHV) of HTC product. In case of adding catalyst, HHV of solid biofuel was higher and reaction occurred at lower temperature and pressure. Also, HTC solid product had been characterized and found to be hydrophobic, increased HHV (over 40%), and pelletized easily compared to raw material.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.1
• /
• pp.1-9
• /
• 2012

Densified fuels from biomass are widely used in North America and Europe as a regenerable and clean bioenergy. In this study, the fuel characteristics and densification characteristics of Japanese larch and Hyunsasi poplar were studied using a piston-type briquetting machine. The effects of pressure, pressure holding time, species, and particle size on briquette characteristics were studied. At room temperature, the highly densified briquettes of Japanese larch and Hyunsasi poplar can be produced at a compression pressure of 110~170 MPa. The produced briquettes have densities between 0.66 and 0.94 g/$cm^3$ after 28 days of storage at room temperature. The optimum pressure holding time was found to be 12 seconds. There is a linear increase in pressure with increase in density. The densities of briquettes from Japanese larch were higher than those of briquettes from Hyunsasi poplar. Also, the coarser particle size resulted in higher densities in briquettes than the finer particle size.

• Environmental and Resource Economics Review
• /
• v.29 no.4
• /
• pp.469-497
• /
• 2020

More than one-third of the world's population still has no access to clean cooking facilities despite global interest and efforts to expand the accessibility of clean cooking fuels. They use traditional biomass, i.e., crops, animal dung and firewood, as their cooking fuel, and the health and economic damage from it is severe. As many studies have been conducted to understand the choice and transition of cooking fuel in developing countries, characteristics of household head have been addressed as one of the main fuel determinants. However, decision-making in households is not only made by household head and can vary depending on the relative characteristics of household members. Thus, this study analyses the determinants of cooking fuel choice through the samples of Cambodian couples(household head and his/her spouse) considering both characteristics of husbands and wives. As a result, it is confirmed that the effects of characteristics, such as employment, education levels, and frequency of media use, between husbands and wives on cooking fuel choice were different. This study is expected to contribute to the development of more sophisticated policies to increase clean fuel in Cambodia, given that it takes into account the characteristics of spouses who have not previously been dealt with in analyzing the determinants of cooking fuel choice and that it is difficult to find research on Cambodia.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.1
• /
• pp.14-21
• /
• 1991

Steam-exploded woods were delignified by two-stage with a 0.3% NaOH extraction and oxygen-alkali bleaching and were subjected to the enzymatic hydrolysis with cellulase enzyme. Also, an improved almost quantitative recycle process of cellulase enzyme was discussed. In enzyme recovery by affinity method, The first recycling showed relatively high hydrolysis rate of 96.4%. Even at the third recycle, hydrolysis rate was 87.0 percents. In the case of cellulase recovery by ultrafiltration method, first 2 recycling treatments resulted in very high hydrolysis rates, 96.8% and 95.0%, respectively. Even the third recycling showed about 93.6%. Steam-explosion treatment of oak wood followed by 2-stage delignification with alkali and oxygen-alkali produced a excellant substrate for the enzymatic hydrolysis that allowed almost quantitative recycle of cellulase.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.101-101
• /
• 2011

재생 셀룰로스 섬유의 원료로 사용되는 셀룰로스는 면, 마, 목재 등 고등식물의 주성분으로 매년 수십억톤이 광합성에 의하여 생산되어지고 있다. 따라서 석유류와 같은 화석연료의 가격 변동에 영향을 받지 않고 안정적으로 수입되고 있다. 또한, 셀룰로스에는 면이나 마류 등과 같이 간단한 정제 처리에 의해 의류용 섬유로서 사용될 수 있는 것과 목재 섬유와 같이 펄프화하여 종이, 인견섬유, 필름 등으로 사용되어지는 것이 있으며, 셀룰로스 유도체도 제조할 수 있다. 현재까지 개발된 섬유들 중 대표적인 셀룰로스계 재생섬유인 비스코스 레이온(Viscose rayon)은 그 제조 방법이 환경적으로 치명적인 문제를 안고 있으나 고유의 우수한 드레이프성, 흡습성, 독특한 광택, 시원한 촉감 등을 가지고 있어 그 소비는 꾸준한 상황이다. 이러한 Viscose rayon을 대체하기 위하여 친환경적인 공법을 이용하여 개발된 Lyocell 제품이 각광을 받고 있다. 면 셀룰로스 재생섬유는 기존의 Lyocell섬유에 비해 신도는 높고 모듈러스가 낮아 Modal과 같은 촉감을 가지고, 피브릴 발생이 없어 방사공정에서 가교반응이 필요치 않는 것으로 기대된다. 친환경 공법인 Lyocell 공법으로 개발된 면 린터 원료를 이용하여 면 린터 셀룰로스 재생섬유 제조기술을 개발하고자 한다. 따라서 본 연구에서는 면 린터 셀룰로스 재생섬유의 기술적인 신뢰성을 검증하기 위해 면 린터 셀룰로스 재생섬유소재 피브릴화 정도의 표준화 시험법을 연구하고자 한다. 사용원단으로 Tencel A-100, Tencel standard, Modal, Lyocell LF, 면 린터 섬유를 사용하였으며, 세탁, 염색, 알칼리조건 처리에 따른 물성 변화를 알아보았다. 물성 변화는 전자현미경으로 측정하였다.