• Journal of Conservation Science
• /
• v.37 no.3
• /
• pp.220-231
• /
• 2021

The use of digital copies of film-based analog images and the introduction of digital radiographic imaging systems using image plates gradually replace the non-destructive radiationirradiation method of Cultural Heritage. The quality of images obtained from this technique is affected by conditions such as tube voltage, tube current, and exposure time, type of image acquisition medium, distance of the artifacts from the image acquisition medium, and thickness of artifacts. In this study, we evaluated the grayscale image obtained using GE's Computed Radiograhpy (CR) imaging system, the transmission characteristics of the X-ray source for each tree type (pine, chestnut, sawtooth oak, ginkgo) used in wooden Cultural Heritage, and the signal-to-noise ratio (SNR) and contrast. The GE's CR imaging were analyzed using the Duplex wire image quality indicator, line-pair gauges.

• Journal of Korean Society of Forest Science
• /
• v.82 no.2
• /
• pp.176-187
• /
• 1993

Based on the analysis of ecomorphological characters for 84 tree and shrub species, climax indices were estimated so as to interpret the position of the successional sere for the species in the natural deciduous forest. Nineteen ecomorphological characters, considered to be associated with successional gradient in the forest, were selected for the study. One of 2 to 4 steps per character for each species was given on a standardized scale of increasing climaxness, and the index was computed by percent of the sum of the scoring values for total score. Calculated mean value of 54.2 for all indices. Carpinus laxiflora had the highest index value of 83.3, and Populus davidiana recorded the lowest of 18.8. The most climax group, greater than 70 of the index, contained only 9 species, intermediate group, between 40 to 70 of the index, had 58 species, and the most pioneer group, less than 40 of the index comprised 17 species. The result has noticed that the large number of species would take advantage of most diverse resource and niche in the intermediate stage of the sere in the forest. The three components, i.e., light absorption, reproduction, and wood quality were used as axes for a 3-dimensional projection of the relative position for 44 species by principal component analysis. Along the similar ecomorphological characters, four recognized species group were classified by cluster analysis. The distribution pattern of plant families on the index gradient showed that the Betulaceae and Aceraceae had the widest seral amplitude, and the Salicaceae was a family typified as pioneer. There were no families specializing entirely with climax niche.

• Conservation Science in Museum
• /
• v.17
• /
• pp.43-54
• /
• 2016

This study examines wood materials used in the inscription sword with ring pommel discovered at Geumgwanchong Tomb in Gyeongju: one set inscribed with the name "King Isaji"(K618) and another inscribed with the phrase "the Sword of King Isaji"(M336). The scabbards of both swords are made of Juglandaceae(Juglandaceae Juglans spp). Two separate wood pieces were joined together to create the hilt and the scabbard of the sword engraved with the name "King Isaji." The hilt of the sword with the inscription "the Sword of King Isaji" was also made by joining two wood pieces.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.1
• /
• pp.56-63
• /
• 1999

Machinability of three Korean domestic bamboo species, Phyllostachys pubescens Mazel, Phyllostachys nigra var. henonis Stapf. and Phyllostachys bambusoides S. et Z., was studied to investigate the possibility of utilization of Korean domestic bamboo species as raw material for industry. Splitting force reached a maximum within the first inch of knife travel and diminished thereafter. Parallel-sided wedge-type knife with sharpness angle of 15 degree required the lowest maximum splitting force. Roughnesses of surfaces developed during planing and sawing of bamboo were lower than those of Pinus radiata D. Don and quality of ripped surface was better than that of cross-cut surface on bamboo. 62.5 hours were required to dry 12mm-thick Phyllostachys pubescens Mazel from moisture content of 60% to moisture content of 10% at $70^{\circ}C$.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.292-297
• /
• 2010

Sound absorption capability and anatomical features of kagikazura (Uncaria rhynchophylla) and larch (lalix kaemferi) wood were estimated. Sound absorption coefficients had been measured by the two microphone transfer function method and anatomical features of kagikazura wood examined by SEM observation. The sound absorption coefficients of Uncaria rhynchophylla was higher than lalix kaemferi. Especially, in the frequency range of 1 to 4KHz, sound absorption coefficients of kagikazura was about 2~3 times higher than those of lalix kaemferi. Abundant and big vessel observed on the cross sectional surface of kagikazura wood and simple perforation plate observed on the longitudinal surface. It was surmised that the abundant big vessel element and simple perforation plate behaved as a sound absorbing pore.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.119-127
• /
• 2013

In cases of wooden structure and wooden house installed on the outside, metal goods used for basic connection are usually screw bolts, strainless nails and general iron nails. As metal connections on wood are directly exposed to exterior environment, friction resistibility of nails on metal connections declines and continual defects on this are generated and maintenance for it is required. However, experiments and analyses for preparing basic data for improvement of the problems have been not conducted so far and wooden structures with defects are abandoned. Accordingly, by analyzing friction resistibility of connections by each kind of woods and metal goods, the study aims to suggest to use metal goods appropriately by kinds of woods and manufacture conditions with analysis on characteristics of resistibility of extracting nails for solving such problems and to secure basic data for establishing maintenance, repair and reinforcement plans.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.511-526
• /
• 2018

Effects of heat treatment on the characteristics of Royal paulownia (Paulownia tometosa) wood were investigated. The results were compared with those of Suwon silver poplar (Populus tementiglandulosa) and Korean red pine (Pinus densiflora) woods. The wood samples of the three species were treated at $160^{\circ}C$, $180^{\circ}C$, $200^{\circ}C$ and $220^{\circ}C$ in an electric furnace for 2 hours. The changes of color, density, mass loss, and relative crystallinity were investigated before and after heat treatment. The lightness ($L^*$) decreased rapidly from $200^{\circ}C$ in all species. There were no change in red-green chromaticity($a^*$) and yellow-blue chromaticity($b^*$) of Royal paulownia and poplar woods with increasing temperature. Whereas, yellow-blue chromaticity($b^*$) of Korean red pine wood decreased sharply from $200^{\circ}C$. Royal paulownia wood showed appreciable color change(${\Delta}E^*$) after heat treatment above $180^{\circ}C$. Poplar and pine woods, however, presented significant color change from $160^{\circ}C$. Color change of the three wood species increased rapidly with increasing temperature. Mass loss of the three wood species by heat treatment was the highest in the Royal paulownia wood and the lowest in the pine wood. Mass loss and relative crystallinity increased and density decreased slightly with increasing temperature. Consequently, it is revealed that Royal paulownia wood showed considerable differences in the temperature of color change, weight loss and change of relative crystallinity compared to the other wood species.

• Journal of Conservation Science
• /
• v.30 no.4
• /
• pp.329-334
• /
• 2014

A scientific analysis of ancient textiles provides significant data to understand weaving techniques and culture of textiles in each region and charateristics of materials used at that time. In addition, species identification of waterlogged wooden objects is a scientific analysis method that allow us to verify information of relation of foreign species trade and exchange, of preferable species through kinds of wooden products, and of forest environment as well as method setting of conservation. As a result of a species analysis about historical textiles and a wooden comb in a bronze bowl that were excavated from Hapgang-ri, Dong-Myun, Yungi-gun, Chungcheongnam-do, Textile1 and Textile3 are identified as Urticacese Boehmeri nivea ; ramie, Textie2 is identified as Malvaceae Gossypium herbaceum, and a wooden comb is identified as Betulaceae Betula spp. It is expected that this result will help to make further comparative studies, identifying species of textiles and trees of ancient times.

• Journal of Korean Society of Forest Science
• /
• v.94 no.6
• /
• pp.387-396
• /
• 2005

Having employed the transitional probability model based on Markov chain, the study was carried out to examine successional trends for community types in the natural deciduous forest of Mt. Jumbong. The species composition of oncoming generation in overstory was estimated from that of mid-story, and the species composition in mid-story was based upon that of understory. Successional trend for each community was predicted from the reorganized probability matrix of tree replacement by the square of climax index, which was evaluated by the factors of light absorption, reproduction, and wood quality. As the result of analysis, following table shows the oncoming generation of steady state and dominant species in overstory and mid-story by community types. Even though Acer pseudo-sieboldianum and Carpinus cordata could hardly reach the canopy layer due to the intrinsic growth form, these species were predicted to maintain high compositional ratio so as to play an important ecological role in the study forest ecosystem.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.73-81
• /
• 2004

To develope of the inexpensive anti-stain chemicals, it was conducted to investigate the inhibitory effectiveness of mycelial growth and anti-mold effectiveness against test fungi causing surface mold of wood, iron corrosivity and hygroscopicity of six fluoride-based chemicals made from industrial by- product.Among the six chemicals. RNF-3 and RNF-4 were the most effective with respect to a mycelial growth control and anti-mold effectiveness. For the wood treatment with these chemicals, the optimum concentration was about 2% and there was no difference in the effectiveness of chemicals between wood species. The wood treated with synthesized chemicals showed a relatively high iron corrosion rate for corrosive F component whereas, in the treatment with RNF-3 and RNF-4, there was no difference from the untreated wood when the concentration was less than 2%. The hygroscopic property of wood was not effected by treatment of these chemicals. To prove the feasibility for practical using of RNF-3 and RNF-4 chemicals, it is necessary to test of anti-mold effectiveness in the sawmill by field test.