• Journal of Korea Water Resources Association
• /
• v.45 no.5
• /
• pp.455-464
• /
• 2012

In this study, a combined unsteady friction model has been developed to simulate the waterhammer phenomenon for the pipeline system. The method of characteristics has been employed as the modeling platform for the integration of the acceleration based model and the frequency dependant model for unsteady friction. Both Zielke's model and Ramos model were also compared with pressure measurements of a pilot plant pipeline system. In order to validate the modeling approach, a pipeline system equipped with the high frequency pressure data acquisition system was fabricated. The time series of pressure, introduced by a sudden valve closure, were obtained for two Reynolds numbers. A trial and error method was used to calibrate parameters for unsteady friction model. The comparison between different unsteady friction contributions in pressure variation provided the comprehensive understanding in the pressure damping mechanism of waterhammer. The proper evaluation of unsteady friction impact is a critical factor for accurate simulation of hydraulic transient.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.368-376
• /
• 2004

The estimation of the diffusion coefficients of the Gaussian plume model and the release rate by assimilation of tracer-gas measurements on Younggwang site was tested. Diffusion coefficients were modified by linear programming of both the measurements and the simulated using the Gaussian plume model. The application of the modified diffusion coefficients improved the prediction ability of the Gaussian plume model on both 3 km and 8 km arc lines. And, the release rate of tracer gas was estimated using least squares method. The optimal source rate was estimated by minimizing the errors between the measured concentrations and the computed ones by the Gaussian plume model. The obtained release rate showed a good agreement with the real release rate of the Younggwang experiment in 24%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.654-658
• /
• 2012

국내에서 수행한 대부분의 제방 침투에 대한 수리모형실험 연구는 제체만을 대상으로 수행되었으며, 투수성 기초지반을 고려한 연구는 찾아보기 어려운 상황이다. 이 연구에서는 개정된 제방설계기준에 따른 1:3의 비탈경사와 투수성 기초지반을 가지는 제방의 침투실험을 수행하였으며, 향후 제방침투 수치모의에 필요한 검보정 자료를 확보할 목적으로 수행하였다. 부산광역시 강서구에 위치한 낙동강 제2하구둑 건설 현장에서 제체의 재료를 채취여 입도분석과 들밀도시험을 통해 제방의 건조단위중량과 다짐도 및 제방의 투수계수는 각각 $1.372g/cm^3$, 93%, 1.35 m/day이며 통일분류법의 SM에 속하는 것으로 확인하였다. 0.45 m, 0.50 m, 0.55 m, 0.60 m의 4가지 수위(각각 Case-1~4) 조건에 대하여 정상상태에 도달할 때까지 실험을 계속한 결과 각각의 실험조건별 침윤선은 대체로 동일한 양상을 보였지만 몇 지점에서 위압수두계 수위의 이상점이 발견되었다. 제방을 해체하면서 원인을 찾아본 결과 머드볼이 형성되어 있음을 확인하였으며, 침투 흐름에 상당한 영향을 미쳤을 것으로 생각된다.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.1
• /
• pp.50-62
• /
• 1994

This paper presents the results of a comparative analysis of the model test results to investigate the effect of bulbous bow installed on a large full form ship to the ship resistance performance. Seven parameters related to the shape of bulbous bow were selected and varied systematically to inquire their effects experimentally. A total number of twenty-three ship models with different bulbous bow were manufactured, and resistance tests. flow visualization test, and wave profile measurement were carried out for each model. For the comparative analysis between the various bulb forms and their model test results, bulbous bow forms are classified into nine groups according to their form characteristics. From the analysis of the trend of the resistance components, it was verified that form resistance has dominant effect on the total resistance of a slow full form ship. The model test and its statistical analysis showed that the direction of streamlines around bulbous bow has close relationship with resistance components. especially with form resistance

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.694-698
• /
• 2010

하천의 만곡부에서는 유량에 따라 흐름특성이 달라지고, 하도의 변화가 끊임없이 일어난다. 만곡부의 흐름변화 현상을 파악하기위해 정형화된 하도를 가정하여 개수로 실험을 하거나 수치모형을 이용하여 연구하고 있다. 하지만 실제 자연 하천에 적용한 사례는 많지 않은 실정이다. 본 연구에서는 만곡 자연하천에 대한 흐름특성을 분석하기위해 2차원 수치모의 모형인 CCHE2D 모형을 이용하여 평창강 본류 청령포 만곡부를 모의하였다. 평창강의 계획빈도인 50년, 100년 및 200년 빈도별 확률 홍수량을 적용하여 대상하천을 분석하였다. 모의 결과 유속분포는 만곡부 외측보다 내측에서 유속이 빠르게 나타나며, 최대 유속선은 최단거리에 근접하는 것을 볼 수 있었다. 만곡부 외측에서는 흐름분리가 발생하였으며 와류의 발생을 볼 수 있었다. 또한 홍수시 청령포의 요곡사주부분이 침수되어 침식을 예상할 수 있었다. 본 연구에서는 기존의 개수로 실험 연구와 비교하여 만곡부에 적용 시 불안정한 해석과 계산 결과를 산정하는 2차원 수치모형의 실제 하천에 적용성을 검증하였고, 평창강의 빈도별 홍수량을 모의하여 비교 분석함으로써 홍수시 사행하천의 흐름특성과 침식에 대한 기초자료를 제시하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.1
• /
• pp.63-68
• /
• 2006

Time series of waterline changes during a flood/ebb cycle can be utilized for supplementary data for measuring bottom topography. The waterlines extracted from consecutive images are substituted for depth contours using water level data. The distances between contours are quantified through a rectification image process. This technique is applied to the Keunpoolan beach in the Daeijak Island near Incheon. A camera monitoring technique supported by natural water level changes produces bottom topography with high precision. It is also less time consuming and more economical. The technique also can be utilized effectively to the physical modeling f3r measuring bottom changes in the three dimensional basin.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.2
• /
• pp.175-185
• /
• 2008

One of the concerns that arise during navigation in ice-covered waters is the magnitude of ice loads encountered by ships. However, the accurate estimation of ice loads still remains as a rather difficult task in the design of icebreaking vessels. This paper focuses on the development of simple ice load prediction formulas for the icebreaking cargo vessels. The maximum ice loads are expected from unbroken ice sheet and these loads are most likely to be concentrated at the bow area. Published ice load data for icebreaking vessels, from the model tests and also from full-scale sea trials, are collected and then several ice load prediction formulas are compared with these data. Finally, based on collected data, a semi-empirical ice load prediction formula is recommended for the icebreaking cargo vessels.

• Journal of Korean Society of Transportation
• /
• v.31 no.1
• /
• pp.77-86
• /
• 2013

This paper focuses on the development of analytical models for estimating the changes in saturation flow rates (SFR) at the stop-lines of a signalized intersection due to the existence of nearby work-zones, and thereby calculating the prevailing capacity values for specific lane groups. Major changes were incorporated in the logics of previous models and significant revisions have been made to secure the accuracy and simplicity. Furthermore, much attention was paid to model validation by making comparisons to both extensive simulation results and empirical data from various sites. It was found that SFRs are highly sensitive to the location of work-zones, the distance to each work-zone from the stop-line of a concerned approach, the number of lanes open and closed, and the effective green time. Using such geometric and operating conditions that constitute work-zone environment, the proposed models successfully estimated SFR values with a miniscule margin of error.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.3
• /
• pp.11-20
• /
• 2000

The flow characteristics around the stern region of two VLCCs with the same forebody and slightly different afterbody are investigated along with propulsive performance of the ship. The local mean flow measurements and the resistance and self-propulsion tests are carried out in the towing tank for the two VLCC hull forms. The measured results clearly show the formation of bilge vortices and their effect on propulsive efficiency. The comparisons are made for the two VLCC hull forms and the relation between stern framelines and bilge vortex strength is explored. Experimental data can provide a good test case to validate the accuracy of numerical methods and turbulence model of CFD codes for ship flow calculation.

• Journal of Navigation and Port Research
• /
• v.40 no.6
• /
• pp.353-360
• /
• 2016

The International Maritime Organization (IMO) has issued international standards for ship maneuverability and stability. These have been established to improve marine safety and influence the direction of research. The previous literature has been researched, but there are few studies on the relationship between ship maneuverability and stability. This study carried out a fundamental experiment to quantitatively evaluate that relationship. Radius of turn and maximum heel angle depending on changing were analyzed through a turning test using a free running model ship. The test results show the change tendency of decreasing turn radius and increasng maximum heel angle according to a GM decrease. A rough estimate equation is proposed to predict the change tendency on radius of turn and angle of maximum heel as GM decreases. Many ships can suddenly experience reduced GM due to unexpected reasons during sailing. The results in this study can be used as fundamental data to estimate a ship's tactical turn diameter and variable heel angle for steering as GM decreases.