• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.338-338
• /
• 2017

하천기본계획, 생태하천 복원사업, 또는 하천재해예방 사업 등에 의해 수행되는 하천정비사업은 홍수재해예방, 생태하천 복구 등 여러 목적에 의해 시행되고 있다. 특히 최근 이루어지는 하천정비사업은 공원, 캠핑장, 주차장 등 시민들에게 다양한 편의시설을 제공하기 위한 친수공간으로 조성되고 있다. 이러한 하천구역 내의 친수공간 조성은 홍수주의보 및 홍수경보에 대응하는 유량에 비해 상대적으로 적은 유량에도 침수피해가 발생함으로써 중소규모의 유량에 대한 홍수위험도도 함께 증가시켰다. 친수공간 및 교량하부도로 등 저수위에 대한 홍수취약구간의 홍수정보를 취득하기 위해서는 해당 위험지점의 수위관측을 통해 위험상황을 실시간으로 모니터링 하는 것이 홍수피해에 대비하고 대응하기 위한 가장 확실한 방법이다. 하지만, 예산과 인력 등의 문제로 인해 모든 지점에 대해 수위관측을 실시하여 홍수예보시스템에 의해 홍수예측정보를 제공하기에는 현실적으로 한계가 있다. 따라서 친수공간에서의 홍수피해를 최소화하기 위해, 각 친수공간의 지형정보가 인근의 홍수예보지점 또는 수위관측소 지점과 어떠한 연관성을 갖는지 분석할 필요가 있다. 본 연구에서는 1차원 수리해석 모형을 통해 원거리에 위치한 수위관측 및 홍수정보를 이용하여 하천구역내 위치한 친수공간에 대한 침수위험도를 분석하기 위한 방법론을 제시하고자 하였다. 즉, 원거리에 위치한 수위관측소의 수위 및 유량 정보를 활용하여 수위관측이 이루어지 않는 지점의 침수정보를 예측하기 위한 방법론을 제시하고자 한다. 낙동강 하류부에 대해 제시한 방법론에 의해 목표로 하는 친수공간에 대한 유량별 수위에 대한 침수도표를 작성하였다. 본 방법론과 이에 의해 작성된 친수공간의 침수도표는 취약구간에 대한 각 수위별 침수정보를 제공하기 위한 기초자료로 활용될 수 있을 것으로 판단된다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.1
• /
• pp.15-22
• /
• 2011

In this research, static load test is performed to verify the arch effect and structural performance of CFTA(Concrete-Filled and Tied steel tubular Arch) girder, and FE(Finite Element) analysis is performed to investigate validity of the test result. CFTA girder is designed to maximize the benefit of each material, such as steel plate, filled concrete and PS tendon. Static load test is performed based on the frame-analysis result of 12m sample miniature model. The result of static load test is that structural performance and safety of CFTA girder are confirmed and there is different deflection mode with other structural form result from arch effect. FE analysis with ABAQUS is also performed to show the validity of the truck collision safety and static load test.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.3
• /
• pp.21-28
• /
• 2022

The TMD has a simple structure than other vibration control devices and shows excellent control performance for the simple harmonic vibration generated in the structure. However, the vibration control range is narrower than other control devices, making it vulnerable to vibration cycles caused by unexpected external loads. The ETMD developed in this study consisted of Mass with electromagnets. Therefore when supplying a current, the magnetic field is formed to increase the friction force with the friction plate, thereby instantaneously controlling the behavior of the Mass. The experiment was conducted to compare the control performance of the control device by installing the ETMD developed for control performance evaluation in the center of the model simple beam bridge to forced excitation at 3.02 Hz where the maximum bending displacement occurs. As a result of the experiment, ETMD exhibited excellent control performance with a maximum bending displacement attenuation rate of 57.51%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.6-6
• /
• 2022

최근 수재해에 대응하기 위한 물관리 환경은 기후변화에 따른 홍수 피해 심화와 댐과 하천 시설의 노후화 점증, 하천관리일원화 등 정책적 변화, 그리고 포스트코로나 디지털 혁신 등 복합적 대전환 시대 진입에 따라 복잡다단한 양상을 보이고 있다. 디지털 트윈은 디지털 대전환(digital transformation) 시대 다양한 산업 영역에서 지능화와 생산성 향상을 목적으로 도입되고 있다. 본 국가 시범사업에서는 170 km에 달하는 섬진강 유역 전체를 대상으로 홍수에 대응하기 위한 디지털 트윈 플랫폼(K-Twin SJ)을 구축하고 있다. 본 플랫폼은 국가 인프라 지능정보화 사업의 일환으로 시작되었으며, 공간정보와 시설물 모델링, 홍수 분석 등 수재해에 대응하기 위한 수자원 분야의 다학제적인 강소기업들과 K-water에서 컨소시엄을 구성하여 추진하고 있다. 본 사업의 내용은 섬진강 댐-하천 유역에 대하여 고정밀도 3D 공간정보화, 실시간 물관리 데이터 연계, 홍수 분석 시뮬레이션, AI 댐 운영 최적화, AI 사면 정보 생성, 하천 제방 안전성 평가, AI 지능형 CCTV 영상분석, 간이 침수피해 예측, 드론 제약사항 조사 체계 개발을 포함하고 있다. 물관리 데이터와 하천 시설정보를 트윈 플랫폼 상에서 위치기반으로 시각화 표출하기 위해서는 유역의 공간정보를 3차원으로 구축하는 과정이 필수적이다. 따라서 GIS 기반의 섬진강 하천 중심 공간정보 구축을 위해 유역의 국가 정사영상과 5m 수치표고모형(DEM)은 최신성과를 협조 받아 적용하였으며, 홍수 분석을 위한 하천 중심 공간정보는 신규 헬기에 LiDAR 매핑을 수행하여 0.5m 급 DEM을 신규 구축하였다. 또한 하천 시설물 중 섬진강댐과 79개 주요 하천 횡단 교량과 3개 보 시설을 지상기준점 측량과 드론 매핑, 패턴 방식의 경량화 작업을 통해 트윈에 탑재할 수 있는 시설물 3D 객체 모델을 제작하였다. 홍수 분석을 위해서는 섬진강 유역에 대해 K-Drum, K-River, K-Flood 모델을 구축하였으며, AI 하천 수위 예측 학습 모델을 개발하였다. 섬진강 디지털 트윈 유역 물관리 플랫폼을 통해 데이터 기반의 똑똑한 물관리를 구현하고자 한다.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.1
• /
• pp.33-45
• /
• 2006

Cable-stayed bridges are more inherently vulnerable to wind during the erection stages than when they are already being used. Even if a bridge that is already being used is aerodynamically stable, it is prone to having aerodynamic instabilities within the design wind speed during construction. Therefore, when the bridge's designers deliberate on the method they will use in constructing the bridge, they must likewise come up with a suitable plan to ensure the stability of the bridge during its erection (e.g., conducting a wind-tunnel investigation). This paper describes the aeroelastic full-bridge model tests that were conducted to investigate the aerodynamic behavior of the bridge during erection, with emphasis on aerodynamic stability and the mitigation of the buffeting response through temporary stabilization. The aerodynamic performance of a cable -stayed bridge with a main span of 50 m was studied in its completed stage and in two erection stages, corresponding 50% and 90% completion, respectively. In the 50% erection stage tests, a balanced cantilever configuration, with wind cable and temporary support at the tower, was conducted. The system that was determined to be most effective in reducing wind action on the bridge during construction was proposed in the paper, based on the results of the comparative study that was conducted.

• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.313-324
• /
• 2010

There are many problems in application of FRP reinforcing bars as shear reinforcement, since bending of FRP bars is not a feasible process on construction site. Even though FRP bars can be manufactured in bent shape, they have lower strength at bent location. However, there are no serious problems to use FRP bars as flexural reinforcement. Plates or slabs like bridge decks, in general, do not need shear reinforcements. These types of members with FRP flexural reinforcement have lower shear strength than those with conventional steel flexural reinforcement. However, reliable process or equation for shear strength estimation of FRP reinforced concrete without shear reinforcement are not established, yet. In this study, predicted shear strength obtained from available design equations and assessment equations are compared with 211 experimental results. The results showed that among the current design codes, the Architectural Institute of Japan (AIJ) and the Institution of Structural Engineers (ISE) provided the best estimation. ACI 440.1R-06 provided conservative results with degree of dispersion similar to that of ISE. In addition, regression analysis on the collected experimental results was conducted to develop regression models. As a result, a new reliable shear strength equation was proposed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.6
• /
• pp.489-495
• /
• 2011

Fossil fuel energy has become a worldwide environmental issue due to its effect on global warming and depletion in its supply. Therefore, the interest in developing alternative energy source has been rising. Ocean energy, especially, has gained strength as an alternative energy source for its unlimited supply with low secondary risks. Among all the ocean energy, the west coast of Korea holds the field of large-scale energy development because of its distinctive tidal range. Tidal power plant construction at the sea may expedite multi development effects such as bridge roles, tourism resource effects and adjustability of flood inundation at the inner bay. This study introduces the validity of tidal power plant construction at Garilim Bay in west coast of Korea by examining anticipated hydraulic characteristics using EFDC model. Through EFDC numerical simulations, the feasibility of Garolim Bay as a tidal power plant field has been proved. And the most effective tidal power plant construction would be to install hydraulic turbine in the west side of bay entrance where ebb current is stronger, and install water gate in the east side of bay entrance where the flood current is superior.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4D
• /
• pp.671-678
• /
• 2006

In this study, to describe vehicle-structure dynamic interaction phenomena with 1/4 vehicle model, nonlinear Hertzian contact spring and nonlinear contact damper are adopted. The external loads acting on 1/4 vehicle model are selfweight of vehicle and geometry information of running surface. The constraint equation on contact surface is implemented by the Penalty method with stabilization and the reaction from constraint violation. To describe pitching motion of various vehicles two types of the displacement constraint equations are exerted to connect between car bodies and between bogie frames, i.e., the rigid body connection and the rigid body connection with pin, respectively. For the time integration of dynamic equations of vehicles and structure Newmark time integration scheme is adopted. To reduce the error caused by inadequate time step size, adaptive time-stepping technique is also adopted. Thus, it is expected that more versatile dynamic interaction phenomena can be described by this approach and it can be applied to various railway dynamic problems with low computational cost.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.5 s.48
• /
• pp.463-473
• /
• 2000

This paper presents the results of the experimental and analytical investigation for the fatigue strength of welded details frequently used in steel bridges, especially for the details with relatively lower fatigue strength. The welded details included four kinds of welded details corresponding to the categories C, D, E and E' which represent the flange attachment details, web attachment details, transverse stiffeners and cover-plate details. Tensile fatigue tests were performed. The test results were compared with other available test results and the fatigue criteria of AASHTO, JSSC and Eurocode specifications. Generally, our test results were well agreed with other test results and satisfied with above-mentioned fatigue design provisions. However, it was found that transversely loaded weld-details showed lower fatigue strength than longitudinally loaded weld-details in transverse stiffener detail, and the test results of those details were not satisfied with AASHTO fatigue provisions. Examining the effect of length of gusset plate attachment details, welded details with longer attachment showed relatively lower fatigue strength, especially for the out-of-plane gusset plate details. It is recommended to perform additional fatigue tests with various loading and detail parameters and to establish the more detailed fatigue categories such as Eurocode or JSSC

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.6
• /
• pp.691-697
• /
• 2015

In this paper, an embedded EM sensor was researched to estimate prestressing force of PS tendon in PSC girder. Recent methodologies for managing prestressing force loss were staying on verifying a applying prestressing force under construction, namely the loss management can not be controlled after construction. To estimate the tensile force of PS tendon during lifetime of PSC girder, this research proposed a bobbin-type embedded EM sensor that can be embedded in PSC girder is designed and fabricated considering the shape properties of anchorage zone and sheath. To verify the proposed sensor, a small PSC girder test was performed. The embedded EM sensor was connected to a sheath and anchor block, and the concrete was poured. After curing, the change of the permeability of PS tendon under tensile forces of 200, 710, 1070, 1300kN was measured using embedded EM sensor. The permeability of PS tendon had decreased according to the increment of applied tensile force. Also it is confirmed that the change of permeability due to applied tensile force could resolve the applied tensile force values. As a result, proposed embedded EM sensor could be embed into the PSC girder and it could be used to estimate the tensile force variation during lifetime of PSC girder.