• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1238-1241
• /
• 1992

The series type DC motor is normally nonlinearly modeled, but in this paper, the nonlinear model is linearized for the speed control. The proposed algorithm is constructed by the fuzzy logic controllers. Then the system is investigated for the effects of changes by the scale factor, and fuzziness of fuzzy variables.

• Proceedings of the KIEE Conference
• /
• 2004.07e
• /
• pp.33-36
• /
• 2004

In this paper, a new estimation algorithm for the rotor speed for SRM drives is described. The algorithm is implemented by the sliding mode observer. The stability and robustness of the sliding observer for the parameter variations of the SRM are proved by variable structure control theory. Variable speed control of the SRM is accomplished by the estimated speed. Experiment results verify that the sliding mode observer is able to estimate the speed.

• The Journal of the Acoustical Society of Korea
• /
• v.5 no.1
• /
• pp.35-40
• /
• 1986

본 연구는 펄스 반사법을 이용하여 금속 재료 단면의 영상을 얻는데 그 목적이 있다. 기존의 탐 상기는 대부분 A - 스캔 방식으로 결과를 전시하여 검사자가 직접 CRT 상에 나타난 결과를 판독해야 하므로 숙련자라 하더라도 어느정도 오차가 수반되며 판독에 시간이 요하는 등 불편이 따른다. 본 연구 에서는 판독 과정을 자동화함으로써 정확도와 검사 속도를 개선하였으며 탐촉 지점은 스텝핑모터를 이 용하여 일정 간격으로 제어하였다. 도 탐상 결과를 B-스캔 방식으로 영상 처리함으로써 재료 단면의 상 태 파악을 용이하게 하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.23-23
• /
• 2004

이동로봇의 독립성과 움직임에 자유도를 높이기 위해서 축전지를 이동로봇에 탑재하고, 이를 이용하여 동력을 공급하는 경우가 대부분이다 이러한 경우에 에너지 효율은 제한된 동력을 가지는 시스템의 가동 가능시간을 결정하는 중요한 성능지수가 된다. 또한, 이동로봇의 최대속도나 최대가속도, 등판각도 등의 설계 사양을 소형의 모터를 사용하여 만족시키는 것은 이동로봇의 소형화, 경량화 및 시스템의 가격을 낮추기 위해 필수적이다. 그러나 이동로봇의 최대의 문제점 중의 하나인 소비전력의 감소에 대한 문제는 활발히 연구되고 있지 않다.(중략)

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1105-1106
• /
• 2006

전기 자동차에서 회생제동시 회수되는 에너지의 양을 향상시키기 위한 회생제동 방식에 대하여 연구하였다. 회생제동시 에너지의 흐름중 밭전기의 효율이 최대가 되도록 토크과 모터 속도를 기어비를 제어함으로써 차량 제동시 보다 많은 에너지가 배터리로 회생되도록 하는 회생제동 최적변속 알고리즘에 대한 연구를 진행하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.319-322
• /
• 1997

In vector control technique, stator currents of an induction motor are transformed to equivalent d-q currents in reference frame consist of d and q axis, each of which is coincide with flux and torque direction respectively. In this paper, the new algorithm is suggested where the stator current through an induction motor torque is monitored by using a vector control method where an additional equipment is not need. The G-programming is used to apply the suggested algorithm in the experiment and this is applied to an actual system to monitor the torque value of an induction motor on real time. To solve the vibration trouble of estimated torque caused from an unbalanced real rotating speed of an induction motor and measured rotating speed by suggesting the reconstructed in a method based on measurement current signal. This produced system testifies an accuracy of an induction motor through the experiment by comparing the reference value of the control method.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.2
• /
• pp.200-206
• /
• 2015

In order to verify the lift enhancement of the 2D hydrofoil with trailing edge rotor and check the ability of its practical use, experimental studies were conducted in the caviation tunnel using the test model with NACA0020 section. The three-component forces acting on the model could be measured by exclusively designed sting type multi-component load cell. The trailing edge of the model has been replaced with rotor which could be controlled by DC servo motor installed at the exterior of the tunnel. A typical effect of the trailing edge rotor has been introduced among the systematic experiments on various angular deviation of the model and the rotational velocity of the trailing edge rotor. It is appeared that the circulation control effect could be easily adjusted by selecting the rotational velocity of the trailing edge rotor and the lift force was augmented more than two times. Thus the proposed lifting device could be utilized as a novel high lifting device which has adjustability of lift force.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.506-510
• /
• 2004

A torque transmission system composed of several gears and couplings is flexible. In order to get an exact response of motor, the torsional vibration due to an unexpected change of motor speed must be suppressed. Therefore, it is very important that motor control suppress vibration. Various methods to control it including dual inertia system are proposed. Specially, the method of vibration suppression is that vibration can be suppressed to fee㏈ack the estimated torsion torque via the disturbance observer filter being of normal filter. The suitable Proportional controller and coefficient parameter can be designed using CDM and the torsional vibration also be suppressed, but it has a low degree of adaptability to disturbance. The PID controller can be designed easily, but makes the excessive overshoot and oscillation for system response in the early period. To resolve these problems, simple and practical PID controller with two degree of freedom is proposed recently that it ran improve performance of obeying the reference unconcerned in any disturbance by changing the proportional gain by two degree of freedom parameter. But it has also the defect that parameter a must be changed to obtain the ideal Proportional parameter. On this paper, we design the controller which automatically adjusts parameter u using fuzzy Algorithm to overcome such defects. Also, we compare the proposed method with established one and evaluate them to confirm performance of the designed controller.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.919-925
• /
• 2023

Modern drones are equipped with miniaturized mission equipment capable of performing various tasks such as surveillance and reconnaissance. Consequently, these mission equipment are exposed to disturbances like wind loads and motor rotations, which can lead to instability in the operation of the Electro-Optical Targeting System (EOTS). Specifically, simple step inputs for changing the line of sight in EOTS can cause abrupt changes in speed, inducing overshoot and potentially creating instability along with other disturbances. To address this, a velocity profile was designed so that the angular velocity moves in a trapezoidal shape when changing the EOTS line of sight. A Double-loop controller was designed to apply this profile as an input to the external loop receiving position feedback. The system's stability was then compared, and the velocity profile was optimized within a stable range by varying maximum speed and acceleration.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.01a
• /
• pp.279-280
• /
• 2011

2바퀴이상의 로봇은 중심점을 기준으로 안정화가 이루어진다. 그러나 2바퀴이하의 로봇으로 수직 자세를 유지하기 위해서는 로봇자체를 기울여 중심점을 이동하므로 수평을 유지할 수 있다. 그러나 이러한 중심점의 이동은 속도나 방향성분이 같이 출력되므로 정확한 센서의 계산이 요구되고 정밀한 제어를 필요로 한다. 또한 많은 구조물로 인해 장애물 인식 및 자율주행 알고리즘 등이 필요하며 장시간 정보획득과 무인기 연동을 위한 빠른 움직임을 가져야한다. 위의 2조건을 만족하기 위한 구성으로 최근들어 두 바퀴를 가지는 모바일 역진자 로봇에 대한 연구가 활발히 이루어지고 있다. 이는 서비스 및 주행 로봇의 알고리즘이 휴머노이드에서 모바일 역진자 로봇으로 변화되었기 때문이다. 모바일 역진자 로봇은 휴머노이드에 비하여 사용되는 모터의 수가 적고 균형을 잡으려면 관절마다 값비싼 고성능 모터가 필요하며 이를 가동하려면 전력도 많이 소모되며 대용량 배터리를 장착할 수밖에 없게 된다. 반면 바퀴로 움직이는 로봇은 전력이 적게 들고 이동도 쉽다. 따라서 본 연구에서는 IMU를 이용한 간단하면서도 정확한 센서의 연산 방법과 이를 이용한 자세제어 방법을 연구한다.