• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.1
• /
• pp.133-138
• /
• 2011

Compression pressure of individual cylinder and valve timing have big influence on combustion pressure, indicated mean effective pressure (IMEP), emission, vibration, combustion noise and many other combustion parameters. Therefore, uniformity of compression pressure and valve timing became one of most important engine design and production standard. Conventional method to evaluate compression pressure uniformity is to measure each cylinder pressure by mechanical pressure gage during cranking. This conventional method causes inaccuracy of cylinder pressure measurement because of different cranking speed results from battery status and also causes high manhour and cost. To check valve timing, related FEAD parts should be disassembled and timing mark should be checked manually. This study describes and suggests new methodology to measure compression pressure by analysis of start motor current and to check valve timing by cylinder pressure with high accuracy. With this new methodology, possibility to detect leaky cylinder and wrong valve timing was observed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.7
• /
• pp.938-947
• /
• 2003

In this paper, we derived the formula for estimating the power of the electric motors needed to operate the Decanter-type centrifuge. In the derivation of the formula the sludge-removal torque is to be supplied from the formula derived in the first paper. The intricate nature of the transmission mechanism in the planetary gear trains of the sludge-removal power and torque has been clarified in this second paper. In particular we considered two-motor system, where the main motor drives the machine while the differential-speed control motor plays the role of braking in adjusting the differential speed. Sample calculation for the specific design treated in the first paper showed that the selection criterion for the main motor depends on the lower limit of the differential speed; when the lower limit is set low, it should be selected based on the steadily operating power, while it should be selected based on the starting power when the lower limit is set high. The total power required by both the main motor and the differential-speed control motor increases as the differential speed is decreased. It is suggested that the power loss in the differential-speed control motor could be minimized by attaching an electric generator to it.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.61-61
• /
• 2017

노지 고추 수확작업은 100% 인력에 의존하고 있으며 7~9월에 걸쳐 5~6회의 다수의 작업이 수행되어 노동 강도가 크다. 또한 농촌의 고령화와 노동력 감소로 인하여 수확인력의 부족이 발생하고 있음에도 불구하고 시중에 유통되고 있는 고추 및 노지채소 수확작업 편이기기는 동력이 아닌 인력으로 이랑사이를 이동하며 작물을 수확하는 구조로 되어있다. 이는 노동 강도를 줄여주는 효과가 미미하기 때문에 동력이 수반된 편이장치가 필요하며 또한 적절한 모터 및 제어장치가 요구된다. 적절한 모터를 선정함에 있어서 영향을 주는 인자는 주행저항(RR)이며, 구성요소로는 구름마찰저항(Rr), 공기저항(RА), 등판저항(Rg), 가속저항(Ra)이 있으며, 다음과 같은 식으로 정의된다. 주행저항(RR)=구름마찰저항(Rr)+공기저항(RA)+등판저항(Rg)+가속저항(Ra) 구름마찰저항(Rr)=구름마찰저항계수(${\mu}$)${\times}$차량총중량(W) 등판저항(Rg)=차량총중량(W)${\times}Sin{\theta}$ 공기저항(RА), 및 가속저항(Ra)은 1m/s 미만의 속도가 요구되기 때문에 무시할 수 있다. 동력원에서 최종 구동축으로 전달된 동력은 주행장치를 통하여 지면에 전달되고 이 동력에 의해 작업차의 주행장치에 추진력이 발생하며 주행장치의 추진력이 주행저항 이상이 될 때 작업차는 전진하게 된다. 따라서 작업차의 주행속도를 V(m/s), 전동기의 효율을 ${\mu}_m$, 동력전달효율을 ${\mu}_{TD}$라고 하면 다음과 같은 식이 산출된다. 전동기의 소요출력(P)=주행저항(RR)${\times}$속도(V)/전동기의 효율(${\mu}_m$)${\times}$동력전달효율(${\mu}_{TD}$) 구름마찰계수를 0.3이라고 할 때 포장의 경사도와 작업차의 주행속도 변화에 따른 주행소요 동력을 비교하였다. 주행소요동력은 포장의 경사각과 주행속도의 증가와 더불어 증가한다. 고추 및 노지채소 수확작업 편이장치의 작업시 요구되는 주행속도는 일반적으로 0.25m/s, 등반각은 5도이다. 이때 구동 전동기의 출력은 안전율을 고려하여 식에 의해 계산한 결과 1ps으로 산출 되었다. 선정한 구동모터의 감속비는 7.18 : 1, 에너지의 효율은 78 %, 기동토크는14 N/m 이며, 축전지의 경우 구동모터에 기반 하여 구입이 간편하고 상용화 되어있는 연축전지를 사용하여 교체 및 수리가 간단하도록 하였다. 축전지는 12V 18Ah의 축전지 2개를 사용한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1249-1255
• /
• 2010

An ultra high- pressure system generally consists of a hydraulic power unit, an oil supply unit, an electrical power supply device, and an electrical control device. The hydraulic power unit supplies the hydraulic power to the intensifier to create generate ultra high pressure. The intensifier amplifies increases the pressure using the oil supplied from by the hydraulic power unit. The electrical supply devices and control devices maintain are provided for the electric motors, valves, and sensors. In this study, instead of a flow-control device, a pressure-control type device was mounted on a manifold block in the hydraulic power unit instead of the flow-control type. A servo valve was fitted in the intensifier, and the performance characteristics of the intensifier varied according to the variations of in the pressure cycle and with the temperature of the operating oil in the hydraulic power unit.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.703-709
• /
• 2017

Korea Utility Helicopter(KUH) is a project to replace the aging helicopter presently being operated by the military with a domestic helicopter. The auxiliary power unit is a device that supplies emergency power to the system by an alternator installed when the main generator fails and the start motor converts the electrical energy of the battery into mechanical rotational energy to rotate the auxiliary power unit engine. With continuing power and operation, defects of the starting motor were found and improvements were carried out to solve it. In the failure mode analysis, the causes of possible defects were classified into 5 categories. Analysis of the 5 factors revealed that the main cause of defects is mechanical wear, which was found to be related to spring pressure. 250 tests were conducted through the theoretically determined pressure and regression analysis was performed with 4 sampling.The results showed that pressure was related to wear rate. In conclusion, early wear and breakage due to wear can be controlled through spring force and test showed the prediction of wear and the validity of the result were confirmed.