• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.441-447
• /
• 2023

Lead(Pb), which is currently mainly used for shielding purposes in the medical radiation, has excellent radiation shielding functions, but is continuously exposed to radiation directly or indirectly due to the harmfulness of lead itself to the human body and the inconvenience caused by its heavy weight. Research on shielding materials that are human-friendly, lightweight, and convenient to use that can block risks and replace lead is continuously being conducted. In this study, based on the commonly used polyethylene terephthalate (PET) film and the fabric material used in actual radiation protective clothing, a multi-layer thin film was realized through sputtering and vacuum deposition of bismuth, tungsten, and tin, which are metal materials that can shield radiation. Thus, a shielding film was produced and its applicability as a radiation shielding material was evaluated. The radiation shielding film was manufactured by establishing the optimized conditions for each shielding material while controlling the applied voltage, roll driving speed, and gas supply amount to manufacture the shielding film. The adhesion between the parent material and the shielding metal thin film was confirmed by Cross-cut 100/100, and the stability of the thin film was confirmed through a hot water test for 1 hour to measure the change of the thin film over time. The shielding performance of the finally realized shielding film was measured by the Korea association for radiation application (KARA), and the test conditions (inverse wide beam, tube voltage 50 kV, half layer 1.828 mmAl) were set to obtain an attenuation ratio of 16.4 (initial value 0.300 mGy/s, measured value 0.018 mGy/s) and damping ratio 4.31 (initial value 0.300 mGy/s, measured value 0.069 mGy/s) were obtained. by securing process efficiency for future commercialization, light and shielding films and fabrics were used to lay the foundation for the application of films to radiation protective clothing or construction materials with shielding functions.

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.3
• /
• pp.171-188
• /
• 1977

The response and effect on main upland crops to potassium were discussed and summarized as follows. 1. Adequate average amounts of potash per 10a were 32kg for forage crop; 22.5kg for vegetable crops; 17.3kg for fruit trees; 13.3kg for potatoes; and 6.5kg for cereal crops. Demand of potassium fertilizer in the future will be increased by expanding the acreage of forage crops, vegetable crops and fruit trees. 2. On the average, optimum potash rates on barley, wheat, soybean, corn, white potato and sweet potato were 6.5, 6.9, 4.5, 8.1, 8.9, and 17.7kg per 10a respectively. Yield increaments per 1kg of potash per 10a were 4-5kgs on the average for cereal crops, 68kg for white potato, and 24kg for sweet potato. 3. According to the soil testing data, the exchangeable potassium in the coastal area was higher than that in the inland area and medium in the mountainous area. The exchangeable potassium per province in decreasing order is Jeju>Jeonnam>Kangweon>Kyongnam. Barley : 4. The response of barley to an adequate rate of potassium seemed to be affected more by differences in climatic conditions than to the nature of the soil. 5. The response and the adequate rate of potassium in the southern area, where the temperature is higher, were low because of more release of potassium from the soil. However, the adequate rate of phosphorus was increased due to the fixation of applied phosphorus into the soil in high temperature regions. The more nitrogen application would be required in the southern area due to its high precipitation. 6. The average response of barley to potassium was lower in the southern provinces than northern provinces. Kyongsangpukdo, a southern province, showed a relatively higher response because of the low exchangeable potassium content in the soil and the low-temperature environment in most of cultivation area. 7. Large annual variations in the response to and adequate rates of potassium on barley were noticed. In a cold year, the response of barley to potassium was 2 to 3 times higher than in a normal year. And in the year affected by moisture and drought damage, the responses to potassium was low but adequate rates was higher than cold year. 8. The content of exchangeable potassium in the soil parent materials, in increasing order was Crystalline Schist, Granite, Sedimentary and Basalt. The response of barley to potash occurred in the opposite order with the smallest response being in Crystalline Schist soil. There was a negative correlation between the response and exchangeable potassium contents but there was nearly no difference in the adequate rates of potassium. 9. Exchangeable potassium according to the mode of soil deposition was Alluvium>Residium>Old alluvium>Valley alluvium. The highest response to potash was obtained in Valley alluvium while the other s showed only small differences in responses. 10. Response and adequate rates of potassium seemed to be affected greatly by differences in soil texture. The response to potassium was higher in Sandy loam and Loam soils but the optimum rate of potassium was higher in Clay and Clay loam. Especially when excess amount of potassium was applied in Sandy loam and Loam soils the yield was decreased. 11. The application of potassium retarded the heading date by 1.7 days and increased the length of culm. the number of spikelet per plant, the 1,000 grain weight and the ratio of grain weight to straw. Soybean : 12. Average response of soybean to potassium was the lowest among other cereal crops but 28kg of grain yield was incrased by applying potash at 8kg/10a in newly reclaimed soils. 13. The response in the parent materials soil was in the order of Basalt (Jeju)>Sedimentay>Granite>Lime stone but this response has very wide variations year to year. Corn : 14. The response of corn to potassium decreased in soils where the exchangeable potassium content was high. However, the optimum rate of applied potassium was increased as the soil potassium content was increased because corn production is proportional to the content of soil potassium. 15. An interaction between the response to potassium and the level of phosphorus was noted. A higher response to potassium and higher rates of applied potassium was observed in soils contained optimum level of phosphorus. Potatoes : 16. White potato had a higher requirement for nitrogen than for potassium, which may imply that potato seems to have a higher capability of soil potassium uptake. 17. The yield of white potato was higher in Sandy loam than in Clay loam soil. Potato yields were also higher in soils where the exchangeable potassium content was high even in the same soil texture. However, the response to applied potassium was higher in Clay loam soils than in Sandy loam soils and in paddy soil than in upland soil. 18. The requirement for nitrogen and phosphorus by sweet potato was relatively low. The sweet potato yield is relatively high even under unfavorable soil conditions. A characteristics of sweet potatoes is to require higher level of potassium and to show significant responses to potassium. 19. The response of sweet potato to potassium varied according to soil texture. Higher yields were obtained in Sandy soil, which has a low exchangeable potassium content, by applying sufficient potassium. 20. When the optimum rate of potassium was applied, the yields of sweet potato in newly reclaimed soil were comparable to that in older upland soils.

• Journal of Sericultural and Entomological Science
• /
• v.16 no.1
• /
• pp.67-75
• /
• 1974

The studies are to know how much cocoon crops is damaged by the stained leaf with nicotine produced from the tobacco field cultivated in mulching system in spring season and by residual nicotine in autumn season. Furthermore, the new knowledges are to make both industries keep up with their development. In spring season mulberry Held is located higher on the West-North of tobacco held below 20 degrees of slope and with 36 per cent of East-South wind and 18 per cent of South wind blowing from tobacco fold to the mulberry fold. In addition, silkworm larvae are fed with the mulberry leaf produced in the different plots placing by the different distances, l0m, 25m, 50m, 80m, and loom far from the tobacco Held as a control and it is also considered that narcotic larvae including the dead larvae are not observed. On the other hand, it is noted that better leaf quality and abundant growth of mulberry tree is produced from the mulberry fold closer to the tobacco field and with a low slope. 1) Maximum weight of larval body at the 5th stage is damaged by the stained leaf with the nicotine up to 25m far from the tobacco held. 2) The larvae fed with the mulberry leaf in mulberry Held up to 25m far from the tobacco fold produce small number of the fresh cocoons per 1 liter. 3) Low single cocoon weight and low cocoon shell weight are produced by the poison damaged larvae fed with the mulberry. leaf up to 25m far from the tobacco field and weight of cocoon shell is damaged higher than the single cocoon weight. It is resulted in low percentage of cocoon shell. 4) Cocoon yield including the double cocoon from 10,000 larvae is decreased by the larvae fed with the stained leaf in the mulberry fold up to 25m far from the tobacco fold and 19 per cent of cocoon yield is decreased with 2.4kg of cocoon yield in l0m plot and with 2.5kg of cocoon yield in 25m plot at the first season and at the 2nd season with 1.8kg o( cocoon yield in l0m plot and with 11.5kg of cocoon yield in 25m plot, 11 per cent and 9 per cent of cocoon yield including double cocoon from 10,000 larvae is decreased, as compared with the control, respectively. With these results, it is observed that nicotine damage is occurred to the silkworm larvae if the larvae are fed with the leaf in the mulberry Held within 25m-50m far from the tobacco field.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.2
• /
• pp.230-236
• /
• 2010

Jeju Island is a volanic island which is located about 96 km south of Korean Peninsula. Volcanic ejecta, and volcaniclastic materials are widespread as soil parent materials throughout the island. Soils on the island have the characteristics of typical volcanic ash soils. This study was conducted to reclassify Jeju series based on the second edition of Soil Taxonomy and to discuss the formation of Jeju series in Jeju Island. Morphological properties of typifying pedon of Jeju series were investigated, and physico-chemical properties were analyzed according to Soil survey laboratory methods manual. The typifying pedon has dark brown (10YR 3/3) silt clay loam A horizon (0~22 cm), strong brown (7.5YR 4/6) silty clay BAt horizon (22~43 cm), brown (7.5YR 4/4) silty clay Bt1 horizon (43~80 cm), brown (7.5YR 4/6) silty clay loamBt2 horizon (80~105 cm), and brown (10YR 5/4) silty clay loam Bt3 horizon (105~150 cm). It is developed in elevated lava plain, and are derived from basalt, and pyroclastic materials. The typifying pedon contains 1.3~2.1% oxalate extractable (Al + 1/2 Fe), less than 85%phosphate retention, and higher bulk density than 0.90 Mg $m^{-3}$. That can not be classified as Andisol. But it has an argillic horizon from a depth of 22 to 150 cm, and a base saturation (sum of cations) of less than 35% at 125 cm below the upper boundary of the argillic horizon. That can be classified as Ultisol, not as Andisol. Its has 0.9% or more organic carbon in the upper 15 cm of the argillic horizon, and can be classified as Humult. It dose not have fragipan, kandic horizon, sombric horizon, plinthite, etc. in the given depths, and key out as Haplohumult. A hoizon (0~22 cm) has a fine-earth fraction with both a bulk density of 1.0 Mg $cm^{-3}$ or less, and Al plus 1/2 Fe percentages (by ammonium oxalate) totaling more than 1.0. Thus, it keys out as Andic Haplohumult. It has 35% or more clay at the particle-size control section, and has thermic soil temperature regime. Jeju series can be classified as fine, mixed, themic family of Andic Haplohumults, not as ashy, thermic family of Typic Hapludands. In the western, and northern coastal areas which have a relatively dry climate in Jeju Island, non Andisols are widely distributed. Mean annual precipitation increase 110 mm, and mean annual temperature decrease $0.8^{\circ}C$ with increasing elevation of 100m. In the western, and northern mid-mountaineous areas Andisols, and non Andisols are distributed simultaneously. Jeju series distributed mainly in the western and northern mid-mountaineous areas are developed as Ultisols with Andic subgroup.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.2
• /
• pp.217-223
• /
• 2010

This study was conducted to reclassify Dongsong series based on the second edition of Soil Taxonomy and to discuss the formation of Dongsong series distributed on the lava plain at Cheolweon in Korea. Morphological properties of typifying pedon of Dongsong series were investigated, and physico-chemical properties were analyzed according to Soil Survey Laboratory Methods Manual. The typifying pedon of Dongsong series has brown (7.5YR 4/2) silty clay loam Ap horizon (0-16 cm), brown (7.5YR 4/2) silty clay loam BA horizon (16-22 cm), brown (7.5YR 4/2) silty clay Bt1 horizon (22-50 cm), reddish brown (5YR 5/4) silty clay Bt2 horizon (50-92 cm), and brown (7.5YR 4/3) silty clay loam Bt3 horizon (92-120 cm). It occurs on lava plain derived from baslt materials. The typifying pedon has higher bulk density than 0.90 Mg $m^{-3}$. That can not be classified as Andisol. But it has an argillic horizon from a depth of 22 to more than 120 cm, and a base saturation (sum of cations) of less than 35% at 125 cm below the upper boundary of the argillic horizon. It can be classified as Ultisol, not as Andisol or Alfisol. It has aquic conditions for some time in normal years in one or more horizons within 50 cm of the mineral soil surface, redoximorphic features between a depth of 25 cm, and a depth of 40 cm from the mineral soil surface, and redox concentrations, and 50%or more redox depletions with chroma of 2 or less in the matrix within the upper 12.5 cm of the argillic horizon. Therefore it can be classified as Aquult. It has episaturation, and keys out as Epiaquult. It has 50% or more chroma of 3 or more in one or more horizons between a depth of 25 cm from the mineral soil surface, and a depth of 75 cm. It can be classified as Aeric Aquult. Dongsong series have 35%or more clay at the particle-size control section, and have mesic soil temperature regime. Therefore they can be classified as fine, mesic family of Aeric Epiaquults, not as fine, mesic family of Typic Epiaqualfs. The Quarternary volcanic activities occurred in Jeju Island, Ulrung Island, Baekryeong Island, Cheolweon area, and Mt. Paekdu et al. in the Korean Penninsula. Most of them belong to the central eruption type, but Cheolweon area may be of the fissure eruption type. Dongsong series occur on Cheolweon lava plains derived from basaltic materials. Most soils distributed in Jeju Island, and derived from mainly pyroclastics are developed as Andisols. But Dongsong series distributed in Cheolweon lava plains which have a relatively dry climate and derived from basaltic materials are developed as Ultisols.

• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.113-125
• /
• 1999

Heavy metal elements were analysed to assess degrees of heavy metal contents for the plants, M. sinensis, A. vulgaris and G. oldhamiana, from the Baekdong serpentine area within the western part of Chungnam. The area was divided into two sites ; serpentine area (SP, consisting of serpentinite, SP) and non-serpentine area (NSP, containing amphibole schist, AS and gneiss, GN). Their host rocks(R) and top soils(S) were also collected from the each site. As the results of the study, the plants contain high concentration of Ni Cr, Co in the SP and Fe, Zn in the AS and GN. Plants from the AS of the NSP contain mainly high content in the most of elements. Averages of Ni, Co and Cr for the plants decreased in the order of SP, AS and GN. In the total element contents, M. sinensis and A. vulgaris decreased in the order of Fe > Ni or Cr > Zn > Co > As > Sc within the SP and in the order of Fe > Zn > Cr > Ni, within the GN. Comparing among the parts of plants, root parts were higher in the most of elements than the above grounds. In the relative element ratios of plants collected from the SP and GN (SP/GN) M. sinensis was lower than A. vulgaris in the most of elements, suggesting that the M. sinenis shows low absorption within the infertile serpentine soil and high absorption within the fertile gneiss soil. In the element contents of the top soils and their host rocks, the SP shows higher Ni, Co and Cr contents than the others. Their total contents decreased from SP to AS and GN, suggesting that the soils reflect the composition of their host rocks. Total element contents of the SP decreased in the order of Fe> Cr or Ni> Co> Zn> As> Sc and, for the GN, in the order of Fe> Zn> Cr> Ni> Co or Sc, respectively. In the relative element ratios, R/S of the SP decreased in the order of Cr> As> Fe> Sc> Co> Ni> Zn and for the GN, in the order of Sc> Fe> Ni> Zn> Cr> Co. Comparing with plants within the each site, their top soils were higher than the plants in the most of elements. and their increase and decrease trends for each element are similar. Differences of element contents between the top soils and plants decreased in the order of SP, AS and GN. Plants of the GN were moi-e similar to their soils than those of the others, suggesting that each plant species show different absorptions within the different soils. Comparing with the plants of GN, higher Ni, Co, Cr contents within those of the SP and their survival within the infertile serpentine soil suggest that the M. sinensis, A vulgaris and G. oldhamiana may be the tolerance species in the serpentine soil. Comparisons with the upper crust show that M. sinensis, and A. vulgaris within the SP show high Hi and Cr contents. suggestive of hyperaccumulation. Upper results with the previous studies for the contaminated soils developed as parent materials with the serpentinites suggest additional studies for ecological behaviors for the plant and degrees of accumulations for the elements need to know phytoextraction of the heavy metal elements within the soils.

• Journal of Korean Society of Forest Science
• /
• v.33 no.1
• /
• pp.1-32
• /
• 1977

This study has been made to find out more effective way of vegetation establishment on severely denuded forest land from the viewpoint of soil moisture regimes. Various environmental factors were measured to estimate soil moisture conditions of different sites. Soil moisture influence on growth of over vegetations, water requirement and drought resistance were analyzed. The efficiency of water use was also reckoned at different fertility levels and different soil moisture conditions. This research is composed of field experiment and green house experiment. Field experiment includes height growth, survival and coverage analysis of cover vegetations (Robinia pseudoacacia L., Lespedeza bicolor Turcz, Arundinella hirta Tanaka var. ciliare Koidzumi.) with 4 fertility level treatments on 3 slopes (Steep: $37^{\circ}$, Moderate: $25^{\circ}$, Gentle; $17^{\circ}$) during dry season (1 April-30 June) and wet season (1 July-10 September). At the same time temperature, relative humidity and precipitation were measured to understand the environmental changes. Soil moisture conditions were measured with soil moisture meter with 24 soil cells. Green house experiment comprised height, fresh weight and dry weight measurements of cover vegetations with 4 fertility levels and 3 moisture conditions for 70 days. The results extracted from experiments are as follews. 1. Cover vegtations have 3 patterns of water requirement at the early stage of growth. a) Robinia type has high water requirement and weaker drought resistance. b) Lespedeza type has low water requirement and stronger drought resistance. c) Arundinella type has moderate water requirement and weaker drought resistance. 2. The vegetations have different optimum fertility levels in different soil moisture supply condition. a) Robinia needs a low fertility level in dry condition and a high level in wet condition. b) Lespedeza needs only low fertility level in all conditions. c) Arundinella needs a low fertility level in dry condition and a high level in wet condition. 3. The efficiency of water use (Water/1g dry weight) by fertility levels is different from one another. Robinia and Arundinella have a good efficiency at low fertility level in dry condition and at high fertility level in wet condition. Lespedeza has a good efficiency at low fertility level in all conditions. 4. $P_2O_5$ requirement of Robinia and Lespedeza is high, but that of Arundinella is low. Soil moisture condition has a great influence on $P_2O_5$ absorption in dendued forest land. Once Vegetations are established on suitable sites with optimum fertitity level according to different moisture condition, even the small amount of soil water in denuded land can he used with high efficiency and the effect of fertility treatment can be maximized.

• Korean Journal of Soil Science and Fertilizer
• /
• v.5 no.2
• /
• pp.1-38
• /
• 1972

This study, designed to establish a classification system of paddy soils and suitability groups on productivity and management of paddy land based on soil characteristics, has been made for the paddy soils on the Gimje-Mangyeong plains. The morphological, physical and chemical properties of the 15 paddy soil series found on these plains are briefly as follows: Ten soil series (Baeggu, Bongnam, Buyong, Gimje, Gongdeog, Honam, Jeonbug, Jisan, Mangyeong and Suam) have a B horizon (cambic B), two soil series (Geugrag and Hwadong) have a Bt horizon (argillic B), and three soil series (Gwanghwal, Hwagye and Sindab) have no B or Bt horizons. Uniquely, both the Bongnam and Gongdeog series contain a muck layer in the lower part of subsoil. Four soil series (Baeggu, Gongdeog, Gwanghwal and Sindab) generally are bluish gray and dark gray, and eight soil series (Bongnam, Buyong, Gimje, Honam, Jeonbug, Jisan, Mangyeong and Suam) are either gray or grayish brown. Three soil series (Geugrag, Hwadong and Hwagye), however, are partially gleyed in the surface and subsurface, but have a yellowish brown to brown subsoil or substrata. Seven soil series (Bongnam, Buyong, Geugrag, Gimje, Gongdeog, Honam and Hwadong) are of fine clayey texture, three soil series (Baeggu, Jeonbug and Jisan) belong to fine loamy and fine silty, three soil series (Gwanghwal, Mangyeong and Suam) to coarse loamy and coarse silty, and two soil series (Hwagye and Sindab) to sandy and sandy skeletal texture classes. The carbon content of the surface soil ranges from 0.29 to 2.18 percent, mostly 1.0 to 2.0 percent. The total nitrogen content of the surface soil ranges from 0.03 to 0.25 percent, showing a tendency to decrease irregularly with depth. The C/N ratio in the surface soil ranges from 4.6 to 15.5, dominantly from 8 to 10. The C/N ratio in the subsoil and substrata, however, has a wide range from 3.0 to 20.25. The soil reaction ranges from 4.5 to 8.0. All soil series except the Gwanghwal and Mangyeong series belong to the acid reaction class. The cation exchange cpacity in the surface soil ranges from 5 to 13 milliequivalents per 100 grams of soil, and in all the subsoil and substrata except those of a sandy texture, from 10 to 20 milliequivalents per 100 grams of soil. The base saturation of the soil series except Baeggu and Gongdeog is more than 60 percent. The active iron content of the surface soil ranges from 0.45 to 1.81 ppm, easily-reduceable manganese from 15 to 148 ppm, and available silica from 36 to 366 ppm. The iron and manganese are generally accumulated in a similar position (10 to 70cm. depth), and silica occurs in the same horizon with that of iron and manganese, or in the deeper horizons in the soil profile. The properties of each soil series extending from the sea shore towards the continental plains change with distance and they are related with distance (x) as follows: y(surface soil, clay content) = $$-0.2491x^2+6.0388x-1.1251$$ y(subsoil or subsurface soil, clay content) = $$-0.31646x^2+7.84818x-2.50008$$ y(surface soil, organic carbon content) = $$-0.0089x^2+0.2192x+0.1366$$ y(subsoil or subsurface soil, pH) = $$-0.0178x^2-0.04534x+8.3531$$ Soil profile development, soil color, depositional and organic layers, soil texture and soil reaction etc. are thought to be the major items that should be considered in a paddy soil classification. It was found that most of the soils belonging to the moderately well, somewhat poorly and poorly drained fine and medium textured soils and moderately deep fine textured soils over coarse materials, produce higher paddy yields in excess of 3,750 kg/ha. and most of the soils belonging to the coarse textured soils, well drained fine textured soils, moderately deep medium textured soils over coarse materials and saline soils, produce yields less than 3,750kg/ha. Soil texture of the profile, available soil depth, salinity and gleying of the surface and subsurface soils etc. seem to be the major factors determining rice yields, and these factors are considered when establishing suitability groups for paddy land. The great group, group, subgroup, family and series are proposed for the classification categories of paddy soils. The soil series is the basic category of the classification. The argillic horizon (Bt horizon) and cambic horizon (B horizon) are proposed as two diagnostic horizons of great group level for the determination of the morphological properties of soils in the classification. The specific soil characteristics considered in the group and subgroup levels are soil color of the profile (bluish gray, gray or yellowish brown), salinity (salic), depositonal (fluvic) and muck layers (mucky), and gleying of surface and subsurface soils (gleyic). The family levels are classified on the basis of soil reaction, soil texture and gravel content of the profile. The definitions are given on each classification category, diagnostic horizons and specific soil characteristics respectively. The soils on these plains are classified in eight subgroups and examined under the existing classification system. Further, the suitability group, can be divided into two major categories, suitability class and subclass. The soils within a suitability class are similar in potential productivity and limitation on use and management. Class 1 through 4 are distinguished from each other by combination of soil characteristics. Subclasses are divided from classes that have the same kind of dominant limitations such as slope(e), wettness(w), sandy(s), gravels(g), salinity(t) and non-gleying of the surface and subsurface soils(n). The above suitability classes and subclasses are examined, and the definitions are given. Seven subclasses are found on these plains for paddy soils. The classification and suitability group of 15 paddy soil series on the Gimje-Mangyeong plains may now be tabulated as follows.