• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.2
• /
• pp.26-37
• /
• 2003

Unlike a medical doctor, a dentist performs all the tasks necessary for diagnosis and treatment of a disease all by himself. To increase the diagnostic accuracy, dentists need an efficient working environment providing much more integrated information of clinical data and radiographic image. In this paper, we propose an integrated environment for the dental hospital. It provides paperless and filmless hospital environment by integrating seamlessly three major operations for the dental hospital including patient record generation and management, clinical image acquisition and analysis, and treatment planning and simulation. This system also allows clinicians to provide more predictable dental care for the patients by supporting instant access to all the clinical data and quantitative data analysis.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.136-136
• /
• 2017

본 연구의 목적은 이중편파 레이더 강우자료와 현재 실무에서 널이 이용되고 있는 레이더 강우보정 기법 적용에 따른 격자기반 분포형 강우-유출 모형인 KIMSTORM (KIneMatic wave STOrm Runoff Model)을 이용하여 유출해석을 수행하여 보정된 레이더 강우자료를 적용한 분포형 수문모형의 효율성을 검토하는데 있다. 남강댐 유역($2,293km^2$)을 대상으로 2014년 8월 태풍 이벤트(나크리), 2016년 10월 태풍 이벤트(차바)에 대하여 비슬산 레이더 강우자료를 사용하였다. 강우자료의 보정은 21개 지점 강우와 레이더 강우를 이용하여 조건부 합성 보정기법을 이용하였으며, 누적 강우량 그리고 면적 강우량 모두 관측치를 잘 재현함을 확인 할 수 있었다. $R^2$(coefficient of determination), ME (model efficiency), VCI (volume conservation index)를 이용하여 적용성을 평가하였다. 2016년 태풍 차바 이벤트에서의 유출 모형의 보정결과 조건부 합성 보정기법을 적용하기전 $R^2$, ME는 각각 0.75, 0.13으로 나타났고 조건부 합성 보정기법을 적용하였을 경우 각각 0.87, 0.82로 유출량 정확도가 크게 향상됨을 나타냈다. 다양한 국지성 집중호우 이벤트는 레이더 강우자료의 과대 및 과소추정을 유발하는 오차의 원인으로 조건부 합성 보정기법은 이러한 오차를 줄여 강우-유출 모형의 유출분석 결과 비교시 첨두유량 및 정량적인 면에서 실측 유량과 가깝게 모의되는 결과를 나타냈다.

• The Korean Journal of Applied Statistics
• /
• v.34 no.2
• /
• pp.205-223
• /
• 2021

In this paper, we study a method to determine the existence of unit roots by using the adaptive lasso. The previously proposed method that applied the adaptive lasso to the original time series has low power when there is an unknown trend. Therefore, we propose a modified version that fits the ADF regression model without deterministic component using the adaptive lasso to the detrended series instead of the original series. Our Monte Carlo simulation experiments show that the modified method improves the power over the original method and works well in large samples.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.211-211
• /
• 2017

장기유출해석 모델은 수자원의 안정적인 확보와 이용, 유역단위 기초자료 조사관리 등을 위하여 수자원 장기종합계획 및 전국유역조사사업 등에 활용되고 있다. 주로 국외에서 개발된 모형이 활용되고 있어, 국내의 여건에 맞추어 편의성이 개선된 모형을 찾는 것은 매우 어려운 일이다. 또한, 유출해석을 수행하기에 앞서 지속적으로 업데이트된 모델에 대한 객관적인 평가를 수행한 사례는 드물다. 따라서, 본 연구에서는 국내에서 주로 활용되고 있는 장기유출해석모델(TANK, SWAT, SSARR, PRMS 등)에 대한 비교검토를 토대로 각종 사업과의 연계성, 계산의 효율성, 정확도 등을 고려하여 USGS에서 개발한 PRMS v.4.0.2를 기반으로 국내유역에 활용이 가능하도록 개선한 $K-BASIN^{RR}$ 및 입력자료 전처리기를 개발하였다. PRMS 모형은 융설 및 지하수 흐름 등 다양한 기능을 포함하여 강우유출 분석에 활용성 높은 모형으로 평가받고 있으나, 국내 OS환경 및 활용 단위계에서 활용성이 떨어지는 단점이 있다. 본 연구에서는 소스코드 개선 및 GUI구축을 통하여 PC 환경에서 구동이 쉽도록 재구성하였고, 사용자 편의성 확보를 위한 입력자료 전처리기를 개발함으로써 수자원단위지도 3.0, 임상도 재분류 테이블, 토양도 재분류 테이블의 DB화 및 모형의 구동을 위한 HRU분할, 입력자료 생성이 가능하도록 하였다. 매개변수 최적화를 위하여 하천 유량뿐만 아니라 기저유출량을 대상으로 Monte-Carlo 시뮬레이션 기반의 매개변수를 최적화 기능을 탑재하였다. 개발된 모형의 적용성 평가를 위하여 용담댐 시험유역을 대상으로 11년 간(2005-2015)의 강우 및 온도자료를 입력자료로 활용하여 모의한 결과 샘플의 개수에 따라 NSE(Nash-Sutcliffe Efficiency)를 0.9까지 추정이 가능함을 파악하였다. 또한, 유출량과 기저유출에 대하여 동시에 최적화를 수행하는 경우 NSE를 유출량에 대하여 0.8, 기저유출량에 대하여 0.6까지 추정이 가능하였다. 최적화된 모의 결과에 대한 검토를 위하여 계산증발산량을 측정증발산량과 비교한 결과, 유사한 패턴을 나타내는 것을 확인할 수 있었다. 본 연구에서 개발한 $K-BASIN^{RR}$을 활용하는 경우 장기유출해석 업무에 효율성 및 정확도를 향상할 수 있을 것으로 판단된다.

• Journal of Korea Water Resources Association
• /
• v.42 no.12
• /
• pp.1039-1052
• /
• 2009

Radar measurement with high temporal and spatial resolutions can be a valuable source of data, especially in the areas where rain gauge installment is not practical. However, this kind of data brings with it many errors. The objective of this paper is to propose a method to evaluate statistically the quantitative and qualitative accuracy at different radar ranges, temporal intervals and raingage densities and use a bias adjustment technique to improve the quality of radar rainfall for the purpose of hydrological application. The method is tested with the data of 2 storm events collected at Jindo (S band) and Kwanak (C band) radar stations. The obtained results show that the accuracy of radar rainfall estimation increases when time interval rises. Radar data at the shorter range seems to be more accurate than the further one, especially for C-band radar. Using the Monte Carlo simulation experiment, we find out that the sampling error of the bias between radar and gauge rainfall reduces nonlinearly with increasing raingage density. The accuracy can be improved considerably if the real-time bias adjustment is applied, making adjusted radar rainfall to be adequately good to apply for hydrological application.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.4
• /
• pp.125-133
• /
• 1989

For convergent photos, which are now widely adopted for terrestrial facility survey, a number of experimental studies and theoretical studies on the developments of accuracy predictional model according to the convergent angle change have been accomplished. And such studies are basically depend on the symmetrical geometric configuration at the normal direction to the center of the object. However, in may cases of facility survey such as building facades, bridges, dam surfaces, relatively flat topography, etc., the object features are almost like planar, and frequently the surroundings do not allow the photo station at normal direction, and the sufficient convergent angle can be hardly achieved. Considering those points, in this study, the accuracy analysis on three dimensional coordinates according to the variations of photo direction and of convergent angle to the planar object were attempted, and the optimum geometric configurations at the normal, side-looking, and the most side-looking direction were investigated. The result through this study show that from normal direction to the side-looking direction angle ${\tau}=30^{\circ}$, the larger the convergent angle, the higher the accuracy, and in case that right photo is at the most side-looking direction, the better accuracy can be achieved according to the convergent angle increase up to $60^{\circ}$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.4
• /
• pp.242-250
• /
• 2014

Conventional researches of standard tool validating cryptographic algorithm have been studied for the internet environment, for the mobile internet. It is important to develop the validation tool for establishment of interoperability and convenience of users in the information systems. Therefore, this paper presents the validation tool of Elliptic Curve Cryptography algorithm that can test if following X9.62 technology standard specification. The validation tool can be applied all information securities using DES, SEED, AES, SHA-1/256/384/512, RSA-OAEP V2.0, V2.1, ECDSA, ECKCDSA, ECDH, etc. Moreover, we can enhance the precision of validation through several experiments and perform the validation tool in the online environment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.7
• /
• pp.121-127
• /
• 2016

We propose a algorithm to calculate power factor of fundamental waveform in an environment where the voltage and current have been distorted by harmonics. In the proposed power factor computation algorithm, voltage and current are converted to rotating DQ reference frame, and power factor is calculated from active power and reactive power. We compare the proposed method with the conventional power factor measurement method as mathematically. In a condition that voltage and current are distorted by harmonics, the proposed method accurately measure the power factor of fundamental wave, and it is confirmed by simulation using MATLAB. If the proposed power factor measurement method is applied to an automatic power factor control system, a power factor compensation performance can be maximized in harmonic distortion environment. As a result, it is possible to reduce electricity prices, reduce line loss, increase load capacity, ensure the transmission margin capacity, and reduce the amount of power generation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.6
• /
• pp.137-145
• /
• 2010

Digital vessel have to accurate and efficient mange the digital data from various sensors in the digital vessel. But, In sensor network, it is difficult to transmit and analyze the entire stream data depending on limited networks, power and processor. Therefore it is suitable to use alternative stream data processing after classifying the continuous stream data. In this paper, We propose efficient processing method that arrange some sensors (temperature, humidity, lighting, voice) and process query based on sliding window for efficient input stream and pre-clustering using multiple Support Vector Machine(SVM) algorithm and manage hash table to summarized information. Processing performance improve as store and search and memory using hash table and usage reduced so maintain hash table in memory. We obtained to efficient result that accuracy rate and processing performance of proposal method using 35,912 data sets.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.97-108
• /
• 2013

Recently, mobile devices were increased and there was a sharp rise in demand. To exploit the location information of each device, many researcher was studying locating systems. The favorite locating or positioning systems were a GPS using satellites and a RTLS using wireless communication between devices. If some obstacle existed nearby the target device, The system have difference of performance. The obstacles near targets were caused signal disconnection and reflection because of NLOS condition. As the result, the NLOS condition degrade the locating performance. In this paper, we propose a locating system which is cooperated two systems using information reliability estimates from LOS/NLOS condition. We developed proposed system. In addition, we performed fields test and simulation tests at various environment for performance evaluation. As the result, the test showed 97% success rate to estimate NLOS condition. Furthermore, the simulation result of our locating system was increased to 89% compared with a single system.