• Proceedings of the Korea Association of Information Systems Conference
• /
• 2004.11a
• /
• pp.349-365
• /
• 2004

기업의 또는 부문에서 구축된 각 정보시스템들은 시간이 지남에 따라 기업의 경쟁우위를 확보하기 위해 통합의 필요성이 증대하게 되었는데, 이러한 필요에 의해 제기된 것이 ERP(Enterprise Resource Planning: 전사적 자원관리)이다. 급변하는 기업의 내${\cdot}$외부 환경에 대해 신속하게 대응하기 위해 ERP 시스템을 도입하는 기업들의 수가 증가함에도 불구하고 ERP 원가관리시스템에 대한 연구는 아직까지 그 범위가 한정되었다고 할 수 있다. 본 논문은 ERP 도입 현황 및 원가관리시스템의 도입${\cdot}$설계현황자료를 바탕으로 하여, 중소기업의 ERP 원가관리시스템의 성공적 도입을 위한 방향을 제시하고자 한다. 중소기업에서 ERP 원가관리시스템을 도입할 때는, 원가관리시스템의 특성과 구축 목표, 구조 설계, 원가대상 설정 등과 관련된 다음과 같은 사항들을 고려하여야 성공적인 시스템을 구축할 수 있을 것이다. 첫째, ERP 원가관리시스템 특성 분석단계에서는 원가정보를 구성하는 내용의 충실성뿐만 아니라 정보가 전달${\cdot}$제공되는 범위와 대상의 적합성과 함께 그 표현의 형식 또한 고려되어야 한다. 둘째, ERP 원가관리시스템 구축목표 설정단계에서는 인가관리정보의 산출요건에 대한 명확한 이해와 목표설정을 기반으로 해야 한다. 셋째, ERP 원가 관리시스템 구조 분석 및 선계단계에서는 생산관리시스템 및 원가대상 설정 분석이 이루어져야 한다. 넷째, ERP 원가관리시스템 구현단계에서는 원가관리시스템과 타 계열시스템과의 인터페이스를 고려해야 한다. 따라서 원가관리시스템의 구현 시에는 관련시스템에서 어떠한 정보론 인터페이스 받을 것인가를 명확히 하여 시스템 가동 시에 타 관련시스템과 원활한 연계가 되도록 함으로써 전사적 종합시스템이 되도록 하여야 학 것이다.RS와 제진장치에 대한 전체적인 성능평가를 성공적으로 수행하였으며, 운전결과 및 경험은 향후 상용설비를 위한 기본자료로 활용할 것이다.X>, 그리고 입원기간은 $21.6\pm14.3일(13\~56)$이었다. 수술 후 평균 CK-MB는 $11.3\pm14.1ng/mL$였다. 수술 후 조기 혈관 개존율은 $100\% (24/24)$였다. 모든 환자에서 완전 추적이 가능하였으며 평균 추적기간은 $20.4\pm15.2개월(5\~43)$이었다. 이 기간 중 사망환자나 흉통이 재발한 환자는 없었다. 걸론: 80세 이상 고령의 환자에서 OPCAB은 수술 후 합병증을 줄이고 좋은 결과를 보여 주었다. 그러므로 고령의 환자에서도 관상동맥우회술의 적응증이 되면 적극적으로 수술을 시행할 필요가 있으며, 수술방법은 OPCAB이 좋을 것으로 생각한다서 실용적 개발의 가능성을 보였다.에 따라 현저한 차이가 있었으며 Dimethoate처리$(30^{\circ}C,\; 0.2\%$액에서 24시간)에 의하여 볍씨의 호흡량이 감소되었다. 9) 산소호흡량과 평균발아소요일수와는 $\gamma=-0.945$로 부의 유의한 상관을 보였는데 산소호흡량이 많은 품종은 평균발아소요일수가 짧은 경향을 보였다. 10) 볍씨의 산소호흡량과 Dimethoate 처리에 의한 볍씨의 발아저해도와는 $\gamma=-0,771$의 높은 부의 상관을 보였으며 산색호흡량이 많은 품종이 발아저해도가 낮고 적은 품종에서는 높았다. 현재까지는 그 활동이 11.2년의 주기성을 보여주지만 그 이전에 있어서는 그 활동이 극히 약화되었을 뿐만 아니라 매우 불규칙하다는 것이 Schneider와 Mass(1975)에 의해 밝혀졌다. 결국 1710년대부터 현재까지 우리나라에 있어서 벼멸구와 흰

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.1
• /
• pp.47-54
• /
• 2011

The remote control mobile robot is the robot accomplishing a task according to the orders giving by a user through departed communication system using a joystick. Basically, to supply a lot of information, as this type of robot uses visual information, the user can check the transmitted information by eyes and give orders to the robot. But the weak point of this type of robot is that it has a possibility to come into a collision with an obstacle not be seen to the user because of the communication delay occurring in a communication system and dead zone happening in visual information. To solve the problem, in this paper, we try to suggest a system applying a fuzzy control system to the robot to avoid collision with an obstacle by an immediate order of the user. The fuzzy control system has better performance than any other existing control methods in the change of noise and parameter. And it is more efficient than any other since it solves easy the complexity of the system analysis occurring because of the nonlinear feature of the mobile robot system. In this paper, we made experiments how the mobile robot controlled by the fuzzy control system avoids an obstacle, tracks the path and avoids the obstacle in the path, to prove the performance and to check the evaluation and the application possibility of the fuzzy control system.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.6
• /
• pp.1353-1366
• /
• 2015

These days Shewhart control chart for evaluating stability of the process is widely used in various field. But it must follow strict assumption of distribution. In real-life problems, this assumption is often violated when many quality characteristics follow non-normal distribution. Moreover, it is more serious in multivariate quality characteristics. To overcome this problem, many researchers have studied the non-parametric control charts. Recently, SVDD (Support Vector Data Description) control chart based on RBF (Radial Basis Function) Kernel, which is called K-chart, determines description of data region on in-control process and is used in various field. But it is important to select kernel parameter or etc. in order to apply the K-chart and they must be predetermined. For this, many researchers use grid search for optimizing parameters. But it has some problems such as selecting search range, calculating cost and time, etc. In this paper, we research the efficiency of selecting parameter regions as data structure vary via simulation study and propose a new method for determining parameters so that it can be easily used and discuss a robust choice of parameters for various data structures. In addition, we apply it on the real example and evaluate its performance.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.4
• /
• pp.254-260
• /
• 2017

The purpose of this study is to evaluate the sound absorption characteristics of a human body according to the amount of clothing worn by using reverberation method measurement method for developing standard test dummy, which can be used for testing absorption of occupied audience chair. Test method was based on the previous study (Conti et al., 2004), each experiment is conducted in the reverberation room and a subject wearing clothes is standing in that chamber. In this experiment, the sound absorption area of each frequency band according to the wearing of various material clothing was measured. As a result of measurements, the average sound absorption area of the whole frequency band was $0.25m^2-0.48m^2$ in case of a subject not wearing outer clothes, and $0.38m^2-0.98m^2$ in case of wearing of outerwear. Polyester tops by showing the maximum value, the highest characteristics in the 800 Hz to 1 kHz band among the rest of fiber materials. The outer jacket made of the wool and cotton materials show a higher absorption area as the frequency increases to the higher frequency band. The change of the sound absorption area according to the clothing amount was divided by the thermal resistance (clo) of the worn clothes and the weight per body surface area.

• Journal of the Korean Magnetics Society
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2008

We have manufactured and evaluated reference samples for the use of low magnetic moment measurements. Before the measurements, SQUID magnetometers were magnetically shielded from external magnetic noise. We considered the purity including magnetic impurities, the optimum thickness, the modification method, and the shape in the preparation of the samples. Three paramagnetic polycrystaline metal plates of Ti, W, and Al with the area of $4mm{\times}6mm$ were prepared finally. The magnetic moments of these three samples are measured very linear up to the field of 5 T without magnetic hysteresis. The temperature deviated ratios of the magnetic moments for Ti, Al, and W from 290 K to 310 K are 0.7, 1.5, and 0.1 %, respectively. The measured magnetic moments for Ti and W samples by our research team are very well agreeable with those by two SQUID magnetometers and a VSM at Quantum Design via international round robin test. The results suggest that the prepared reference samples are well suited for the use in the low magnetic moment measurement with SQUID based magnetometers.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1120-1131
• /
• 2006

This paper describes the numerical analysis techniques using the Combined Integration/Matrix Method to calculate ground potential rise which can be occurred in the various grounding systems. Combined Integration/Matrix Method is used to reduce the error and computation time with the analytical integration equation and the proper segmentaion of earth embedded conductor. To do it, optimal segmentaion method for the buried conductors is presented through error analysis which is capable of applying the practical scaled various grounding systems. The optimum length of segmented element is much co-related with the buried depth of grounding electrode and the maximum length of buried electrode. As a result, less 3 precent errors was obtained by proposed model. The proposed model is applied to verify an effect of multi-grounding problems which was aroused much controversy with separated or common grounding between the high power grounding system and low power grounding system such as signal and telecommunication grounding.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.479-487
• /
• 2004

Biopotential signals have been used as command in systems using electrical stimulation of motor nerves to restore movement after an injury to the central nervous system (CNS). In order to use the voluntary EMG (electromyography) among the biopotentials as a control signal for the electrical stimulation of the same muscle for CNS injury patients, it is necessary to remove M-wave of having high magnitude from raw data. We designed an optimal filter for removing the M-wave and preserving the voluntary EMG and showed that the optimal filter is eigen filter. We also proved that the previous method using the prediction error filter(PEF) is a suboptimal filtering in the sense of preserving the voluntary EMG. On basis of the data obtained from a model for M-wave and voluntary EMG and from actual CNS injury patients, with false-positive rate analysis, the proposed adaptive filter showed a very promising performance in comparison with previous method.

• Journal of Sensor Science and Technology
• /
• v.6 no.5
• /
• pp.385-391
• /
• 1997

An objection of this study is to develop a measuring circuit of a gauge using radioisotope for compaction control. The gauge developed in this study makes use of radioisotope with the activity exempted from domestic atomic law and consists of measuring circuits for gamma-rays and thermal neutrons, a high voltage supply unit, and a microprocessor. To obtain meaningful numbers of pulse counts, parallel five and two circuits are provided for gamma-rays and thermal neutrons, respectively. Being simple in electrical characteristics of G-M detector for gamma-rays, pulses are counted through only a shaping circuit. Very small pulses generated from He- 3 proportional detector for thermal neutrons are amplified to the maximum of 50 [dB] and a window comparator accepts only pulses with meaning. To minimize effects of natural environmental radiation and electrical noise, circuits are electrostatically shielded and pulses made by ripples are eliminated by taking frequency of high voltage supplied to the circuit and pulse height of ripples into consideration. One-chip microprocessor is applied to process various counts, results are stored and the gauage is made capable to communicate with PC. Enough and meaningful numbers of pulses are counted with the prototype gauage for compaction control.

• KIPS Transactions on Software and Data Engineering
• /
• v.1 no.1
• /
• pp.7-18
• /
• 2012

It has been studied to support data having multiple properties, called Skyline Query. The skyline query is not exploring data having all properties but only meaningful data, when we retrieve informations in large data base. The skyline query can be used to provide some information about various environments and situations in sensor network. However, the legacy skyline query has a problem that increases the number of comparisons as the number of sensors are increasing in multi-dimensional data. Also important values are often omitted. Therefore, we propose a new method to reduce the complexity of comparison where the large number of sensors are placed. To reduce the complexity, we transfer a CMF(Category Based Member Function) which can identify preference of specific data when interest query from sync-node is transferred to sub-node. To show the validity of our method, we analyzed the performance by simulations. As a result, it showed that the time complexity was reduced when we retrieved information in multiple sensing data and omitted values are detected by great dominance Skyline.

• Journal of KIISE:Databases
• /
• v.36 no.2
• /
• pp.99-111
• /
• 2009

In wireless sensor networks, various schemes have been proposed to store and process sensed data efficiently. A Data-Centric Storage(DCS) scheme assigns distributed data regions to sensors and stores sensed data to the sensor which is responsible for the data region overlapping the data. The DCS schemes have been proposed to reduce the communication cost for transmitting data and process exact queries and range queries efficiently. Recently, KDDCS that readjusts the distributed data regions dynamically to sensors based on K-D tree was proposed to overcome the storage hot-spots. However, the existing DCS schemes including KDDCS suffer from Query Hot-Spots that are formed if the query regions are not uniformly distributed. As a result, it causes reducing the life time of the sensor network. In this paper, we propose a new DCS scheme, called TPDCS(Time-Parameterized DCS), that avoids the problems of storage hot-spots and query hot-spots. To decentralize the skewed. data and queries, the data regions are assigned by a time dimension as well as data dimensions in our proposed scheme. Therefore, TPDCS extends the life time of sensor networks. It is shown through various experiments that our scheme outperform the existing schemes.