• Journal of the Mineralogical Society of Korea
• /
• v.17 no.1
• /
• pp.61-73
• /
• 2004

The purposes of this study are to investigate the occurrence, the hydrochemical characteristics and the origin of the $CO_2$-rich springs from the Kangwon Province, and to reanalyze the previous studied results of other researchers. The $CO_2$-rich water samples were collected at 13 locations in the Kangwon Province. The $CO_2$-rich water shows a high $CO_2$ concentration ($P_{CO2}$ 0.787 to 4.78 atm), weak acidic pHs, electrical conductivity values ranging from 422 to 2,280 $\mu$S/cm, and high Fe and F contents. The chemical compositions of $CO_2$-rich water from this study area are classified into three types; $Ca-HCO_3$, Ca(Na)-$HCO_3$, $Na-HCO_3$ types. The chemical data of $CO_2$-rich waters and their host rocks indicate that $Na-HCO_3$ type water are mainly influenced by biotite, K-feldspar granite, and Ca(Na)-HC $O_3$, type water is chiefly influenced by gneiss and carbonate minerals in granite. F and Fe contents of $CO_2$-rich waters are abundant in $Na-HCO_3$, and $Ca-HCO_3$ types, respectively. The results of this study suggest that the chemical composition $CO_2$-rich water is mainly controlled by the mineralogical composition of aquifer host rocks. Oxygen and deuterium isotope data indicate that $CO_2$-rich water is meteoric origin. The $\delta^{13}$C values (-0.3$\textperthousand$ to -6.2$\textperthousand$ PDB) suggest that dissolved carbonates are mainly derived from a deep-seated $CO_2$ and partly from carbonate minerals.

• Economic and Environmental Geology
• /
• v.47 no.2
• /
• pp.181-191
• /
• 2014

Olon Ovoot gold mine, Mongolia, is located in the Omnogobi province which is south 500 km from Ulaanbaatar. The mine area consists of the Devonian Bot-Uul khudag formation, the Upper Devonian intrusions, and the Upper Devonian or the Early Jurassic quartz veins. The quartz veins contain from 1 to 32 g/t gold with an average of 5 g/t gold. The quartz veins vary from 0.2 m to 25 m and are concordant or discordant with foliation of the green-schist. The mineralogy of the quartz veins is simple and consists of mainly of white massive quartz with partly transparent quartz in cavity. Quartz, sericite, chlorite, pyrite and carbonates(ankerite, dolomite and siderite) were observed in the alteration zone. Carbonate minerals occur as disseminated, coarse or fine grains with quartz, sericite, chlorite and pyrite near vein margin or within wall-rock xenoliths in quartz vein. Ankerite is present as later dark grey ankerite(13.51 to 16.89 wt.% FeO) and early white grey ankerite(16.67 to 19.90 wt.% FeO). The FeO contents of early ankerite are higher than those of later ankerite. Dolomite contains from 3.89 to 10.44 wt.% FeO and from 0.10 to 0.47 wt.% MnO. Dolomite is present as dark grey dolomite(4.06 to 6.87 wt.% FeO), light white grey dolomite(6.74 to 7.58 wt.% FeO) and grey white dolomite(7.33 to 10.44 wt.% FeO). The FeO contents of white grey dolomite are higher than those of dark grey dolomite. Siderite contains from 34.25 to 48.66 wt.% FeO, from 6.79 to 14.38 wt.% MgO, from 0.06 to 0.26 wt.% MnO and from 2.08 to 8.08 wt.% CaO.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.4
• /
• pp.309-325
• /
• 2004

The Cannington Ag-Pb-Zn deposit, northwest Queensland, Australia developed around the host rocks composing banded and migmatitic gneisses, sillimanite-garnet schist and amphibolite. Three crystal habits of sillimanite, gahnite (Zn-spinel) and garnet porphyroblasts occurred on the host rocks of the Cannington deposit could be used to delineate metamorphism that closely associated with Zn-mineralization in the deposit. Linkages the metamorphism to Zinc-mineralization is determined in four chemical systems, KFMASH (K$_2$O-FeO-MgO-Al$_2$O$_3$-SiO$_2$-$H_2O$), KFMASHTO (K$_2$O-FeO-MgO-Al$_2$O$_3$-SiO$_2$-$H_2O$-TiO$_2$-Fe$_2$O$_3$), NCKFMASH (Na$_2$O-CaO-K$_2$O-FeO-MgO-AlO$_3$-SiO$_2$-$H_2O$) and MnNCK-FMASH (MnO-Na$_2$O-CaO-K$_2$O-FeO-MgO-AlO$_3$-SiO$_2$-$H_2O$), using THERMOCALC program (version 3.1; Powell and Holland 1988). Partial melting in MnNCKFMASH and NCKFMASH systems occurs at lower temperature than in the KFMASH and KFMASHTO systems. The partial melting temperature decreases with increasing of Na/(Na+Ca+K) of the bulk rock compositions in the MnNCKFMASH system. The host rocks have melted ca 15 vol.% in the MnNCKFMASH system at peak metamorphic conditions (634$\pm$62$^{\circ}C$ and 4.8$\pm$1.3 kbar), but partial melting have not occurred in KFMASHTO system. Based on calculations of sillimanite isograd in different systems and sillimanite modal pro-portion, prismatic and rhombic sillimanite and gahnite porphyroblasts including prismatic sillimanite inclusion probably have resulted from pressure and temperature increasing through partial melting (from 550～$600^{\circ}C$, 2.0～3.0 kbar to 700～75$0^{\circ}C$, 5.0～7.0 kbar), furthermore have experienced N-S then W-E crustal shortening during D$_1$ and D$_2$ deformation. Consequently, Zinc mineralization related to gahnite growth occurred during D$_2$ and was redistributed and upgraded by partial melting and retrograde metamorphism into structural and rheological sites during shearing in D$_3$.

• Journal of Korean Society of Forest Science
• /
• v.47 no.1
• /
• pp.52-61
• /
• 1980

This study is carried out to learn the properties of forest soils in Korea and propose the reasonable management methods of forest land. Among 178 soil series surveyed until now in Korea forest soils include 64 series broken down according to the weathered products into 5 categories such as residual materials on mountain and hill, residual materials on rolling and hill, colluvial materials on local valley and fans, alluvial materials and volcanic ash soils. What discussed in this paper are classification system, parent rocks, texture class and drainage conditions of Korean forest soils. The characteristics of Korean forest soil properties classified in U.S.D.A. soil classification system are as follows: 1. Residual soils on mountain and hill (29 soil series) are almost Lithosols without any distinct soil profile development. They have loamy skeletal (11 series), coarse loamy (5 series), fine loamy (3 series), and fine clayey soils (3 series). Their drainage conditions are somewhat excessively drained in 16 series and well drained in 7 series. 2. Residual soils on rolling and hill (19 series) are Red-Yellow Podzolic soils with well developed soil profiles. They have coarse and fine loamy texture in 12 series and fine clayey texture in 5 series mostly with well drained condition. 3. Colluvial soils on local valley and fans (13 series) include mostly Regosols and some Red-Yellow Podzolic Soils and Acid Brown Forest Soils. They have loamy skeletal (4 series), coarse loamy (3 series), fine loamy (3 series), and fine clayey soils (2 series) with well drained condition. 4. Soil textures of weathered products of parent rocks are as follows: 1) Parent rocks producing coarse texture soils are rhyolite, granite gneiss, schist, shale, sandstone, siltstone, and conglomerate. 2) Parent rocks producing fine and heavy texture soils are limestone, basalt, gabbro, and andesite porphyry. 3) Granite is a parent rock producing various textured soils.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.3
• /
• pp.139-144
• /
• 2000

This study was conducted to obtain the basic information to increase the practical use of soil survey data through the subdividing of valley shapes with soil sequences due to different parent rocks, and to study the relationship between the valley shapes and parent rock. The various rocks such as sedimentary(gray shale and sand stone) and igneous rocks(granite, granite gneiss and andesite porphyry) which are the major parent rocks in Yeongnam area were investigated. The characteristics of valleys formed and the kinds of soils derived from different rocks were analysed by using aerial photographs and topographical maps scaled 1:5,000. The rill density in igneous rock area was as high as 40. But the rill bifurcation ratio of first order stream was higher in the sedimentary than the igneous rocks except granite area. The mean slope of valleys in igneous areas was about 8%, which was higher than that of the sedimentary areas. The variability of valley width in the complexly metamorphosed rock, such as granite gneiss, and andesite porphyry, was greater than in sedimentary and in granite rocks. Based on the variability of valley widths and valley slopes, it was possible to classify the valleys into two types. The "Uterus-shaped valleys" had wide variability of valley width and were located in the areas of granite gneiss and andesite porphry rocks. while the "Roots-shaped valleys" had narrow variability of valley width and were located in the sedimentary areas. "Uterus-shaped valleys" were typified by having land forms of mountain foot slopes and alluvial fans, and the soil drainage sequences also had complexities. So that, we concluded that the variability of valley width and valley slopes was associated with kinds of parent rocks and metamorphism which influences soil sequence and characteristics.

• Economic and Environmental Geology
• /
• v.52 no.4
• /
• pp.259-274
• /
• 2019

Using portable XRF and SWIR analyzer, the characteristics of element dispersion and wallrock alterations induced by interaction between hydrothermal fluids and host rocks were investigated and ore exploration factors were estimated for the orogenic-type Samgwang Au deposits. On this purpose, in-situ measurements were conducted for 804 spots at regular intervals with a total of 4,824 times for host rocks, consisting of schist and gneiss, and altered wallrocks contacted with quartz veins in the Bonhang adit of the deposit, and the results were compared with quantitative data obtained by XRF and ICP analysis. The regression coefficients are 0.88 for major elements and 0.56 for trace elements, excluding V. For polished rock slabs, better results came out for major elements, 0.97 and for trace elements, 0.65. In altered wallrocks contacted with quartz veins, elements such as Fe, Zn, and Rb exhibit positive correlations with As in concentrations, while V forms a negative trend. Contour maps demonstrate that As, Zn, Rb, Fe, Ti, Cr, and Ni are enriched together near quartz veins, showing similar elemental behaviors. In-situ analysis using portable SWIR analyzer represents that schist and gneiss contain mica, illite, chlorite, sericite, amphibole, and epidote, while illite, sericite, gypsum, and mica are present in the altered rocks contacted with quartz veins. In contour maps, chlorite occurs mostly in host rocks, while sericite is concentrated near quartz veins. These results are similar to those of previous studies for element dispersion and hydrothermal alteration, and support the possibility for application of in-situ analysis on the exploration of orogenic gold deposit.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2001.06a
• /
• pp.58-59
• /
• 2001

부산에서 북동쪽으로 대략 25km 떨어진 지점에 위치하고 있는 일광광산 부근의 지질은 백악기 화산암ㆍ퇴적암 그리고 이를 관입한 화강암류와 이 암주 내에 발달하는 구리-중석을 함유하고 있는 각력파이프광상으로 이루어져 있다. 일광광산의 화강암류는 거의 타원형으로 felsic한 중앙부와 mafic한 양상의 주변부로 나뉘어지며, 암주 내에 수직적인 원통형의 각력파이프가 광화대를 이루고 있고, 그 주변에는 모암변질대가 발달되어 있다. 각력파이프를 충진하고 있는 vein과 화강암의 중앙부에는 전기석이 풍부하게 산출되고 있다. 일광광산에서 산출되는 전기석은 야외 관찰시 각력파이프 중심에서부터 외곽부쪽으로 전기석의 풍부함이 감소하며 산출형태도 달라진다. 파이프에서 대략반경 150m내에서 전기석은 침상형 의 방사상 모양 내지 rosettes형으로 풍부하게 산출되며, 화강암내의 mafic한 암편을 치환한 형태로 산출되기도 한다. 암주의 중앙부 주변부에서는 거의 미세한 구상형으로 산재되어 나타나고 있다. 전기석은 복잡한 화학식 {(Na, Ca)(Fe, Mg)$_3$(Al, Li)$_{6}$(BO$_3$)$_3$Si$_{6}$O$_{18}$ (OH, F)$_4$}을 갖는 붕산 규산염광물이다. 이러 한 다양한 성분은 마그마의 진화과정, 모암의 특성, 온도, 압력, 성분과 같은 물리ㆍ화학적 성질에 따라 전기석의 성분이 체계적으로 변하기 때문에 모암과 전기석 기원과의 상관관계를 파악할 수 있다. 파이프 부근의 화강암류는 현미 경상에서 전기석이 석류석과 같이 풍부하게 나타나며 장석들은 변질받은 상태로 세리사이트, 녹렴석으로 나타나고, 흑운모와 각섬석은 녹니석화되어 변질된 상태를 보이고 있다. 파이프 중심에서 외곽부로 갈수록 전기석의 함량은 줄어들고 있고 장석들이 알바이트ㆍ칼스베드 쌍정을 보이며, 흑운모가 각섬석보다는 우세하게 나타나고 있다. 전기석은 주상 결정, 자형 내지 반자형의 입자로 다색성을 보이며, 결정 중심에서 가장자리로 갈수록 파란색과 황갈색의 광학적 누대구조를 관찰할 수 있다. 일광광산에서 산출되는 전기석에 대한 현미경 관찰은 열수기원임을 지시하고 있다. 야외조사와 현미경 관찰의 예비조사에 의하면 일광광산의 전기석이 형성된 환경은 다른2가지 화학적인 저장소의 혼합 효과의 결과로 생성되어진 것으로 예상된다. 일광의 화강암류를 만든 마그마는 전기석을 형성할 만큼의 Fe-Mg성분이 충분하지 않았을 것이다. 화강암 내에 흑운모와 각섬석의 결정작용에 의해 마그마의 Fe-Mg성분이 고갈되어지고 이로 인해 그 함량이 감소하며 상대적으로 마그마 내에 남은 붕소(B$_2$O$_3$)는 열수로 용리되고 흑운모, 각섬석과 평형을 유지하며 열수에 남아있게 된다. 잔류용융체에 남은 붕소의 함량은 전기석을 만들기에 충분함에도 불구하고, Fe-Mg 함량이 부족하여 마그마 기원의 전기석 결정을 만들 수가 없다가 광맥이 형성된 시기에 또 다른 열수가 공급되면서 이전의 평형이 깨지고 기존의 흑운모와 같은 염기성 광물이 붕소(B)를 함유한 새로운 열수와 반응하여 전기석을 형성한 것으로 예상한다. 앞으로 전암과 광물에 대해 지화학적 연구를 통해 화강암류와 전기석과의 지화학적 연관성, 주성분 원소와 열수의 특성과의 상관관계, 전기석의 기원(마그마 기원인지 열수기원인지)이 보다 정확하게 파악될 것이다. 마그마 진화에 따른 전기석의 성분변화와 기원을 이용하여 일광광산의 동광화대를 형성한 마그마 계에서 열수계로 이어지는 지질학적 과정을 이해할 수 있을 것이며, 암석 성인론적 지시자로서 어떠한 중요성을 갖는지 논의되어질 수 있다.

• Economic and Environmental Geology
• /
• v.28 no.1
• /
• pp.25-31
• /
• 1995

In Dongnam area, Cretaceous igneous rocks, such as diorite, porphyritic granite, and quartz porphyry intruded Paleozoic sedimentary rocks, such as Myobong slate and Pungchon limestone. The Dongnam Fe-Mo skarn deposits were imposed on the diorite(endoskarn) and the Myobong slate(exoskarn). The ore deposits consist mainly of magnetite and molybdenite with small amounts of sulfides, such as galena, sphalerite, pyrite, chalcopyrite, and pyrrhotite. The igneous rocks show nearly constant $^{206}Pb/^{204}Pb(18.80{\sim}19.06)$ and $^{207}Pb/^{204}Pb(15.71{\sim}15.72)$ ratios. Their $^{207}Pb/^{204}Pb$ ratios higher than the typical ratios of orogene suggest that the igeneous rocks were formed from lower crust(or mantle) - derived magma excessively contaminated by upper crustal materials such as high radiogenic Precambrian basement rocks. The lead isotopic compositions of the igneous rocks, the Pungchon limestone, and the ore minerals show a well defined linear in $^{206}Pb/^{204}Pb$ - $^{207}Pb/^{204}Pb$ plot. The lead isotopic compositions of the igneous rocks are similar to those of magnetite and galena, which were formed at early skarn stage and significantly lower than those of altered quartz porphyry, molybdenites, and pyrite, which were formed at late epithermal alteration stage. Considering the systematic variation of the lead isotopic compositions in the ore minerals according to hydrothermal stages, the variation may be due to a relative variation in surrounding rock(Pungchon limestone) involvement in hydrothermal ore solution leaching the surrounding rock. Therefore, the variation of the lead isotopic compositions in ore minerals can be modeled in terms of the mixing of the leads derived from the igneous rocks as low radiogenic source and the surrounding rock(Pungchon limestone) as high radiogenic source.

• Economic and Environmental Geology
• /
• v.17 no.1
• /
• pp.17-34
• /
• 1984

The Ordovician limestone and dolomite was mineralized by the intrusion of quartz porphyry to form hydrothermal ore deposit along the fault shear zone, which trends $N30^{\circ}-40^{\circ}W$ dipping $60^{\circ}-70^{\circ}SW$. The primary manganese carbonates in the upper part of the deposit were oxidized to form supergene manganese ore deposits. The quartz porphyry is plotted mainly in granite region of the triangular diagram of normative composition. The granite phase contains more copper and lead, but less zinc, nickel and chromium than the granodiorite phase which occupies the northwestern part of the quartz porphyry. The content of copper, lead, zinc, nickel and chromium in the quartz porphyry is lower compared with the granitic rocks from the copper province in the Gyeongsang basin. But the granitic rocks from the lead-zinc province has lower content of copper and nickel than the quartz porphyry. The primary distribution pattern of trace elements in the country rock of limestone and dolomite has close relation with the hydrothermal mineralization, showing anomalous or high content near the fault shear zone. The secondary distribution pattern of trace elements in soils shows close relation with the solubility of the carbonates of the elements under weathering condition.

• Economic and Environmental Geology
• /
• v.30 no.2
• /
• pp.81-87
• /
• 1997

Chonnam and Kyongsang clay alteration areas are distributed in volcanic fields of the Yuchon Group in late Cretaceous period. The host rock of the Chonnam alteration area is generally acidic and that of the Kyongsang alteration area is acidic to dominantly intermediate volcanics. The important difference of two alteration areas is source of fluid; the Chonnam alteration area is characterized by dominantly meteoric water and the Kyongsang alteration area is characterized by dominantly magmatic water. Accordingly, the high temperature minerals such as pyrophyllite and andalusite, and boron bearing minerals such as dumortierite and tourmaline are common in the Kyongsang alteration area. In contrast to this, the lower temperature minerals such as kaolin and alunite are common in the Chonnam alteration area. The mineralogical difference of two alteration areas were depended on the difference of the formation temperature of clay deposits. The other important geochemical difference is the chemistry of hydrothermal solution such as pH. The alteration of "acid-sulfate type" with alteration mineral assemblage of alunite-kaolin-quartz is dominant in the Chonnam alteration area, which was caused by the attack of strong acid and acid solution. In contrast to this, the that of "quartz-sericite type" with the mineral assemblage of sericite-quartz is dominant in the Kyongsang alteration area, which was caused by the attack of neutral or weak acid solution. Also, the Kyongsang and Chonnam alteration areas show the difference in structural setting; the Chonnam alteration area is commonly associated with silicic domes and the Kyongsang alteration area is commonly associated with calderas.