• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.95-102
• /
• 2020

For the purpose of developing a PE fiber-reinforced highly ductile cementitious composite having high tensile strain capacity more than 2% under the condition of containing aggregates with large particle size, this study investigated the tensile behavior of composites according to the particle size and distribution of aggregates in the composite. Compared with the mixture containing silica sand of which particle size is less than 0.6 mm, mixtures containing river sand and/or gravel with the maximum particle size of 2.36 mm, 4.75 mm, 5.6 mm, 6.7 mm were considered in the experimental design. The particle size distributions of aggregates were adjusted for the optimized distribution curves obtained from modified A&A model by blending different sizes of aggregates. All the mixtures presented clear strain-hardening behavior in the direct tensile tests. The mixtures with the blended aggregates to meet the optimum curves of aggregate size distributions showed higher tensile strain capacity than the mixture with silica sand. It was also found that the tensile strain capacity was improved as the maximum size of aggregate increased which resulted in wider particle size distribution. The mixtures with the maximum size of 5.6 mm and 6.7 mm presented very high tensile strain capacities of 4.83% and 5.89%, respectively. This study demonstrated that it was possible to use coarse aggregates in manufacturing highly ductile fiber-reinforced cementitous composite by adjusting the particle size distribution.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.3
• /
• pp.156-163
• /
• 2012

This research has been carried out to investigate the characteristics of cellulose nanofibers manufactured from domestic lignocellulosic materials by mechanical grinding method. The continuous grinding process was effective for loosening cell wall structure, with increasing grinding time, much smaller nanofibers were observed. Filtration time was linearly increased with increasing grinding time for all experimental materials. Relative crystallinity of cellulose was not changed by grinding process, but increased by delignification treatment. Tensile property of fiber sheets was drastically improved with increasing grinding time. Fibers sheets obtained from delignified cone stalks showed an excellent tensile strength. Consequently, it is considered that this study presented some effective information for manufacturing cellulose nanofibers with domestic plantation resources.

• Journal of Periodontal and Implant Science
• /
• v.33 no.4
• /
• pp.643-650
• /
• 2003

Cyclosporin-A(CsA)는 장기와 조직 이식에 따른 거부반응을 조절하기 위해 사용되는 면역억제제로, 이식의학의 발달과 더불어 사용량이 증가하고 있다. CsA의 부작용중의 하나인 치은과증식은 30-50%의 빈도로 발발하고 있다. 최근 macrolide 계열의 항생제인 azithromycin을 이용하여 이런 부작용을 억제시킨다는 임상 보고가 있어서, 이를 실험적으로 확인하고자 하였다. 이를 위해 CsA를 투여한 적이 없는 환자에서 정상 치은조직을 채취, 치은섬유아세포를 배양하였다. 우선 CsA에 대한 치은섬유아세포의 반응을 보기 위해 다양한 농도($10^{-8}-10^{-10}$g/ml)로 처치하여, 세포 증식량과 교원질 합성량을 MTT assay와 Sirol Collagen Assay를 이용하여 측정하였다. 이에 반응을 보인 조건과 세포를 대상으로 다양한 농도($10^{-8}-10^{-10}$g/ml)의 azithromycin을 CsA와 동시 처치하여 아래와 같은 결과를 얻었다. 1. CsA는 일부 치은섬유모세포의 증식을 증가시켰다. 그러나 Collagen 합성능에는 변화를 주지 않았다. 2. Azithromycin은 정상 치은섬유아세포의 증식능에 영향을 미치지 않았다. 3. Azithromycin은 CsA 에 반응을 보인 세포의 증식을 감소시켰으며, 이는 정상 수준과 유사하였다. 이상의 결과에서 azithromycin이 CsA에 의한 치은과증식 치료에 유익하다고 사료된다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.86-86
• /
• 2012

고속방사소재는 연신공정이 없이 6,000m/min이상의 고속방사공정만이 있으므로 원가절감이 되고, 빠른 냉각, 높은 변형속도 등으로 섬유의 결정화도, 분자와 결정의 배향 및 모폴로지(morphology) 변화 등의 기계적 및 섬유상의 특성이 종래의 원사와는 다르게 된다. 방사속도가 증가함에 따라 배향도가 증가하면서 결정영역 또한 증가한다. 또한 기존 연신사에 비해 큰 결정크기를 갖는데 방사속도에 에 따른 방사응력의 증가가 응력유도 결정화도를 유발하여 결정크기 및 결정화도를 증가시키고,따라서 고분자의 용융점도를 고온측으로 이동시키는 현상을 나타내게 한다. 즉, 고속방사에 있어서는 연신에 필요한 임계응력 이상의 과도한 응력이 가해짐으로 인해 결정구조가 일반 연신사에 비해 현저히 발달한다는 것을 알 수 있다. 고속방사 원사를 통일한 조건으로 염색하는 경우 기존의 연신사보다 염착량이 많아 농색으로 염색이 가능하고 염착속도도 빠른 특징을 갖는 데이는 고속방사 원사의 비결정 배향이 낮고 느슨한 구조를 갖기 때문에 염료의 침투가 용이한 것으로 해석되고 있다. PET 섬유는 방사 후 형태안정성을 부여하기 위해서 염색 전처리 공정에서 열을 가하게 된다. 이런 과정에서 섬유의 미세구조가 변하게 되는데,특히 고속방사의 경우 섬유 형성과정이 연신사와는 다르므로 열에 의한 구조 변화와 이에 따른 염색성 변화에 대해 검토해 보는 것은 고속방사의 응용면에서 꼭 필요하다. 본 연구에서는 고속방사소재의 가장 단점인 잔류신도, 저수축현상, stiff감을 보완하면서 고속방사소재의 장점인 심색성을 부각시켜 차별화된 복합사 제조기술을 개발하기 위해 그 기술개발이 기초 연구로서 일반 일반 DTY사와 고속방사소재인 HOY사를 이용한 DTY사의 물성 및 염색 특성을 비교분석 하고자 한다.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.3
• /
• pp.223-229
• /
• 2014

In this study, the fire resistance of high strength concrete with organic fibers and polymer powder (PW) was investigated. Two types of the specimens of ${\phi}100{\times}200mm$ and $300{\times}300{\times}600mm$ sizes were prepared. As a result of the test, it was found that the fiber-to-PW mixing ratio of 1:1 achieved the highest fluidity. Further, it was found that the mixing ratios of PP 0.05% + PW 0.05%, PNY 0.05% + PW 0.05% was sufficient to protect the high strength concrete from spalling. For the mock-up specimens of $300{\times}300{\times}600mm$ size, if the required amounts of fibers were added in the concrete. the concrete spalling was resisted. Likewise, in the case of the polymix (PM) together with PW, all the tested specimens were satisfactory for fire resistance performance.

• Elastomers and Composites
• /
• v.47 no.4
• /
• pp.310-317
• /
• 2012

A jute fiber surface was modified with argon gas in a cylinder type RF plasma generator to enhance the interfacial bond strength and to optimize the plasma treatment condition. The plasma power, gas pressure, and treat time were varied to figure out any effect of those parameters on the morphology and mechanical strength of jute fibers, and the interfacial bond strength for a model composite with polypropylene resin. As the severity of plasma treatment was increased, the surface of jute fibers became rougher. Gas pressure was less effective in roughening of the surface compared with those of treat time and plasma power. Approximately 25% drop in tensile strength of jute fibers was observed for the parameters of treat time and plasma power, while little deterioration was found for gas pressure, with increasing the severity. Based on the interfacial shear strength (IFSS), the optimum plasma treatment condition was determined to be treat time of 30 s, plasma power of 40 W, and gas pressure of 30 mTorr.

• Composites Research
• /
• v.34 no.1
• /
• pp.23-29
• /
• 2021

Commercialized carbon fiber obtained from polyacrylonitrile(PAN) precursor is subjected to oxidation stabilization at 180 to 300℃ in air atmosphere and carbonization process at 1600℃ or lower in inert gas atmosphere. Both of these processes use a lot of time and high energy, but are essential and important for producing high-performance carbon fibers. Therefore, in recent years, an alternative stabilization technology by being assisted with various other energy sources such as plasma, electron beam and microwave which can shorten the process time and lower energy consumption has been studied. In this study, the PAN precursor was stabilized by using plasma treatment and heat treatment continuously. The morphology, structural changes, thermal and physical properties were analyzed using Field emission scanning electron microscopy(FE-SEM), X-ray diffraction(XRD), Fourier transform infrared(FT-IR), Thermogravimetric analysis(TGA) and Favimat.

• Journal of the Korean Society of Radiology
• /
• v.82 no.6
• /
• pp.1600-1605
• /
• 2021

Fibroma of the tendon sheath is a benign slow-growing fibrous tumor. Although rare, cases occurring in the upper extremities usually involve the fingers. It appears as a well-defined, roundor oval-shaped mass originating from the flexor tendon. Abundant fibrous stroma makes fibromas appear as a low intensity mass in all MRI sequences. Most of the fibromas manifest as painless soft tissue masses. Herein, we report a case of fibroma of the tendon sheath with an unusual clinical presentation, triggering carpal tunnel syndrome during wrist movement.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.1
• /
• pp.33-39
• /
• 2020

The objective of this study was to evaluate the possibility for the coffee filter paper of Hanji. In this study, the samples for Hanji filter papers were prepared with three different mulberry fiber contents of 10, 30 and 50%(w/w). Surface brightness and apparent density of hand-made Hanji decreased with increasing mulberry fiber contents. However, values of thickness, tensile strength, wet tensile strength, burst strength, and folding endurance for hand-made Hanji increased by increasing the contents of mulberry fibers due to fiber-to-fiber bonding. The results of the coffee extraction test using the developed filter papers showed no significant differences between commercial filter paper and Hanji filter paper. Therefore, Hanji filter paper containing more than 30%(w/w) mulberry fiber may have potential uses for the dripped coffee filter application from a physical property point of view.

• Food Engineering Progress
• /
• v.15 no.3
• /
• pp.250-256
• /
• 2011

This study was performed to analyze the quality characteristics of Sulgidduk added with different ratio 0, 10 and 15% (w/w) of apple pomace dietary fiber powder (DFP). Increasing DFP from 0% to 15% was decreased in color L* value from 87.9 to 65.9, while a* and b* values were increased from -1.9 to 5.9 and from 5.0 to 20.5, respectively. Scanning Electron Microscopy (SEM; ${\times}500$) showed that air cell size in the Sulgidduk surface increased as the DEP increased. On the other hand, control without DFP had a compact structure without air cell. Enthalpy by DSC showed that control without DFP, 10 and 20% DEP Sulgidduk after 3 days of storage were 4.83, 3.80 and 3.18 J/g at $4^{\circ}C$ and those of $25^{\circ}C$ were 1.14, 0.60 and 0.60 J/g, respectively. DEP had more effective on retarded retrogradation of Sulgidduk at $4^{\circ}C$ than that at $25^{\circ}C$. Hardness of 15% DEP Sulgidduk was around 42% compared to that of control without DFP after 3 days of storage at $4^{\circ}C$. In hedonic test, 15% DEP Sulgidduk showed the highest overall quality score among samples after making and storage 3 days at $4^{\circ}C$.