• Title/Summary/Keyword: 모서리

Search Result 728, Processing Time 0.028 seconds

Edge Detection using Cost Minimization Method (비용 최소화 방법을 이용한 모서리 감지)

  • Lee, Dong-Woo;Lee, Seong-Hoon
    • Journal of Internet of Things and Convergence
    • /
    • v.8 no.1
    • /
    • pp.59-64
    • /
    • 2022
  • Existing edge discovery techniques only found edges of defined shapes based on precise definitions of edges. Therefore, there are many limitations in finding edges for images of complex and diverse shapes that exist in the real world. A method for solving these problems and discovering various types of edges is a cost minimization method. In this method, the cost function and cost factor are defined and used. This cost function calculates the cost of the candidate edge model generated according to the candidate edge generation strategy. If a satisfactory result is obtained, the corresponding candidate edge model becomes the edge for the image. In this study, a new candidate edge generation strategy was proposed to discover edges for images of more diverse shapes in order to improve the disadvantage of only finding edges of a defined shape, which is a problem of the cost minimization method. In addition, the contents of improvement were confirmed through a simple simulation that reflected these points.

Effects of actively controlled surface impedance of top edge of noise barriers (능동제어를 통한 방음벽 상단 모서리의 음향임피던스의 효과)

  • Koh Hyo In;Moser Michael
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • autumn
    • /
    • pp.561-564
    • /
    • 2004
  • 방음벽의 상단모서리는 방음벽의 차음효과를 저하시키는 또 다른 허상음원으로 작용하며 이 현상은 저주파수 영역일수록 두드러지게 나타난다. 이 논문에서는 능동소음제어장치를 통해서 상단 모서리 표면의 음장을 최소화함으로써 표면임피던스의 변화를 통한 상단모서리 주변의 소리에너지의 역학과 원거리 음장에서의 효과를 고찰한다. 능동제어장치를 함유하는 상단모서리를 수학적으로 모델화하여 음장의 분포와 소리의 세기, 능동제어 효과에 영향을 미치는 조건들을 검토하였다. 수치해석적 연구를 통하여서 효과적으로 방음벽의 차음효과를 높이는 최적의 조건을 제시하였다.

  • PDF

The Effects Analysis of Smoothing on Conner Detect (평활화가 모서리 검출에 미치는 영향 분석)

  • Choi, Yeonsung
    • Proceedings of the Korea Contents Association Conference
    • /
    • 2016.05a
    • /
    • pp.457-458
    • /
    • 2016
  • KLT 알고리즘은 자기상관성을 이용하여 선정한 물체의 모서리(conner)를 추적할 특징으로 삼는데, 여기서 사용할 모서리를 검출하는 데는 Harris 방법이 많이 쓰인다. 해리스 방법에서는 강도(intensity)의 미분치를 평활화(smoothing)한 후 고유치를 구해서 모서리인지 에지인지를 판별하게 되는데, 본 논문에서는 평활화가 모서리검출의 성능에 미치는 영향을 밝힌다.

  • PDF

Edge Conditions of Microstrip Line Used for Magnetostatic Surface Wave Transducers (정자표면파 트랜스듀서용 마이크로스트립 선로의 모서리 조건)

  • 이재현
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.15 no.11
    • /
    • pp.1062-1068
    • /
    • 2004
  • In the frequency range where the magnetostatic surface wave may be excited, the edge singularity of a microstrip line having a farrite layer is calculated by using the method proposed by Meixner. From the calculated edge singularity, the change of the current distribution near the edge to which the magnetostatic surface wave propagates is steeper than that near the other edge. And the edge conditions vary with frequency. These results agree with the previous numerical results.

Indoor Localization by Matching of the Types of Vertices (모서리 유형의 정합을 이용한 실내 환경에서의 자기위치검출)

  • Ahn, Hyun-Sik
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.46 no.6
    • /
    • pp.65-72
    • /
    • 2009
  • This paper presents a vision based localization method for indoor mobile robots using the types of vertices from a monocular image. In the images captured from a camera of a robot, the types of vertices are determined by searching vertical edges and their branch edges with a geometric constraints. For obtaining correspondence between the comers of a 2-D map and the vertex of images, the type of vertices and geometrical constraints induced from a geometric analysis. The vertices are matched with the comers by a heuristic method using the type and position of the vertices and the comers. With the matched pairs, nonlinear equations derived from the perspective and rigid transformations are produced. The pose of the robot is computed by solving the equations using a least-squares optimization technique. Experimental results show that the proposed localization method is effective and applicable to the localization of indoor environments.

FinFET 소자의 Fin의 형태 변화에 따른 전기적 특성

  • Lee, Yu-Min;Kim, Tae-Hwan
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.372-372
    • /
    • 2013
  • 기존의 MOSFET 구조의 소자는 비례 축소에 의한 단 채널효과, 누설전류, 신뢰성 문제 같은 어려움에 직면해 있다. 이로 인해 20 nm 이하 소자 크기에서 기존의 MOSFET을 대체할 여러가지 차세대 소자에 대한 연구가 활발히 진행 되고 있다. 그 중에서 FinFET 소자는 비례 축소에 용이하고 누설전류 문제에 대한 장점으로 인해 활발한 연구가 진행되고 있다. 기존의 FinFET 소자에 대한 연구는 FinFET 구조를 이용한 메모리 소자의 전기적 특성의 향상, fin의 크기에 따른 소자의 특성 변화와 FinFET 구조의 물질 변화에 따른 전기적 특성 변화에 대한 연구가 많이 이루어져 왔다. 실제 공정에서의 fin의 형태 변화에 따른 전기적 특성변화에 대한 연구가 필요하다. 본 연구에서는 fin의 모서리의 모양의 변화에 따른 FinFET 소자의 전기적 특성 변화를 관찰하였고 전하 수송 메커니즘을 규명하였다. 실제 FinFET 소자의 공정에서 fin의 형태는 이상적인 직육면체 모양이 아니라 옆면이 기울고 모서리가 곡선이 되게 된다. 이로 인한 전자의 이동도 변화로 인해 소자의 성능이 변화하게 된다. FinFET의 경우 채널을 구성하는 fin의 각 면의 Si의 orientation이 다르다. 또한 fin의 모서리의 모양이 변화 함에 따라 채널영역의 orientation이 변화 하게 된다. 이에 따라 fin의 모서리 모양의 변화에 따른 소자의 전기적 특성 변화를 multi-orientation mobility model을 포함한 three-dimensional TCAD 시뮬레이션을 통해 계산하였다. 옆면과 윗면이 만나는 모서리의 모양의 곡률의 크기를 증가하여 다양한 fin의 형태에서 전기적 특성을 관찰하였다. Fin의 옆면과 윗면이 만나는 모서리의 곡률이 증가함에 따라 depletion 영역의 크기 변화와 채널에서의 전자의 밀도와 이동도의 변화를 관찰하였고 이를 토대로 fin의 형태 변화가 FinFET 소자의 전기적 특성에 미치는 영향을 조사하였다.

  • PDF

The Influence of Corner Stress Singularities on the Vibration of Rhombic Plates Having Various Edge Conditions (다양한 연단조건을 갖는 마름모꼴형 평판의 진동에 대한 모서리 응력특이도의 영향)

  • Kim, Joo-Woo;Cheong, Myung-Chae
    • Journal of Korean Society of Steel Construction
    • /
    • v.12 no.4 s.47
    • /
    • pp.363-374
    • /
    • 2000
  • An accurate method is presented for vibrations of rhombic plates having three different combinations of clamped, simply supported, and free edge conditions. A specific feature here is that the analysis explicitly considers the moment singularities that occur in the two opposite corners having obtuse angles of the rhombic plates. Stationary conditions of single-field Lagrangian functional are derived using the Ritz method. Convergence studies of frequencies show that the corner functions accelerate the convergence rate of solutions. In this paper, accurate frequencies and normalized contours of the vibratory transverse displacement are presented for highly skewed rhombic plates, so that a significant effect of corner stress singularities nay be understood.

  • PDF

Distance Dependency of Corner Frequencies for Earthquakes in and around the Korean Peninsula (한반도 및 주변지역 지진 모서리 주파수의 거리 종속성)

  • Shin, Jin Soo;Kang, Tae-Seob
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.12 no.5
    • /
    • pp.39-45
    • /
    • 2008
  • The source parameters of 85 events ($1.6\;{\leq}\;M_L\;{\leq}\;4.9$) that occurred in and around the Korean Peninsula during 2006 and 2007 were analyzed by an iterative spectral fitting procedure. The data set consists of 487 S-wave trains on three-component seismograms recorded at broadband seismograph stations in the southern part of the Korean Peninsula. Moment magnitudes for each event were determined using spectral analyses of the seismograms, and the results were compared with the variation in corner frequencies with hypocentral distance. Corner frequencies have a tendency to decrease with increases in hypocentral distance, and the decrease is smaller the larger the moment magnitude. We define the measured corner frequency on a displacement spectrum as the apparent corner frequency. Although it was reported that the distance dependency of the corner frequency was found in some regions, such as the eastern Canadian Shield and the Baltic Shield, the origin of the phenomenon is not certain yet.

Analysis of Flexural Vibration of Rhombic Plates with Combinations Clamped and Free Boundary Conditions Including the Effect of Corner Stress Singularities (모서리 응력특이도의 영향을 포함한 고정 또는 자유 경계조건의 조합을 고려한 마름모꼴 평판의 휨 진동 해석)

  • 한봉구
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.3 no.1
    • /
    • pp.9-20
    • /
    • 1999
  • An accurate method is presented for flexural vibrations of rhombic plates having all combinations of clamped and free edge conditions. The prime focus here is that the analysis explicitly considers the bending stress singularities that occur in the two opposite, clamped-free corners having obtuse angles of the rhombic plates. Accurate non-dimensional frequencies and normalized contours of the vibratory transverse displacement are presented for rhombic plates having a large enough obtuse angle of 165$^{\circ}$, so that a significant influence of clamped-free corner stress singularities may be understood.

  • PDF

Corner Inspection of Autoclave-cured L-shaped Composite Structure using Pulse-echo Rotation Scanning Scheme based on Laser Ultrasonic (레이저 초음파 기반 반사식 회전 검사 기법을 이용한 오토클레이브 가공 L 형 복합재 구조물의 모서리 검사)

  • Lee, Young-Jun;Lee, Jung-Ryul;Hong, Sung-Jin
    • Composites Research
    • /
    • v.31 no.5
    • /
    • pp.246-250
    • /
    • 2018
  • In this paper, laser ultrasonic rotation scanning method was proposed to inspect and visualize defects in corner section of curved composite structure. L-shaped composite specimen with defects in its corner section were inspected using laser ultrasonic rotation scanning method. L-shaped specimens had artificial defects at three different depths to simulate delamination damage. All artificial defects were detected clearly in different time-of-flight according to their depths. Inspection result showed that the proposed method is suitable to inspect round corner section of curved composite structure without any special tools.