• Journal of the Korean Vacuum Society
• /
• v.4 no.4
• /
• pp.343-349
• /
• 1995

게데형 분자드래그펌프의 배기특성을 강구(hard sphere)분자모델과 NTC(No Time Counter)충돌 scheme을 이용한 직접모사 법의 하나인 DSMC(direct simulation Monte Carlo)방법을 이용하여 해석하였다. 해석에 사용된 모델은 높이가 일정하고, 길이가 높이의 1~3000배 사이인 이차원 채널이다. 자유분자영역으로부터 연속체 영역까지의 영역에서 최대압축비와 배기속도를 계산하였다. 계산결과 기존의 최대압축비 이론 결과는 채널내의 압력변화가 클 때는 큰 오차를 유발하는 것을 알 수 있었고, 유동방향의 기체분자의 통과확률은 채널 길이와 출구압력에 관계없이 거의 일정한 값을 갖는다는 것을 발견하였다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 1998.04a
• /
• pp.95-99
• /
• 1998

본 논문에서는 웨이브렛 변환을 이용한 영상 부호화에서 입력 영상의 통계적 성질에 관계없이 부호화 결과에 범용성을 갖는 새로운 벡터 양자화기 설계법을 제안한다. 제안하는 벡터 양자화기에서는 대표벡터를 생성하기 위한 학습계열로 난수에 영상의 상관과 에지성분을 첨가한 모사 영상을 사용한다. 제안한 방식에 의해 설계된 벡터양자화기와 코드북 생성에 이용하는 학습계열에 부호화 대상이 되는 영상과 같은 실제의 영상을 사용한 종래방식으로 설계된 벡터양자화기와 부호화 성능을 비교하여 종래방식의 문제점을 명확하게 밝힌다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.389-389
• /
• 2010

우리 연구그룹에서는 분자 소자에서의 소자 구조와 전도도 간의 상관관계를 알아보기 위해서 분자동역학 전산모사와 전자밀도범함수이론 계산 및 전하수송성 계산을 자동으로 수행할 수 있는 소프트웨어를 개발하고 이를 적용해 다양한 나노소자를 연구하고 있다. 본 발표에서는 hexanedithiolate 단일 분자가 Au(111) 전극 사이에서 다양한 S-Au 접점 구조를 가지고 구성된 소자 모델에서 열적 진동이 소자 전도도에 끼치는 효과를 통계적으로 분석하여 단분자 소자 실험에서 제기된 여러 개의 conductance peak의 측정에 대한 논란에 대해 이론적인 규명을 시도할 것이다.

• Journal of the Daesoon Academy of Sciences
• /
• v.48
• /
• pp.445-479
• /
• 2024

The ideological context of the Unity of Heaven and Humankind (天人合一) is useful as an approach to understanding the meaning of 'human affairs (人事)' in Daesoon Thought. In Daesoon Thought, the meaning of 'human affairs' occurs within the context of 'the Way of humans (人道)' being based upon 'the Way of Heaven (天道).' However, in Daesoon Thought, the characteristic of 'the Way of Heaven' originates from the Supreme God of the Ninth Heaven (上帝) and His Reordering Works of Heaven and Earth (天地公事). Specifically, this entails the principle of 'what is devised by humanity (謀事在人), is achieved by Heaven (成事在天),' which is inverted to become 'what is devised by Heaven (謀事在天), is achieved by humanity (成事在人).' This is the principle of 'human affairs' that is revealed as the relationship between Humanity and Heaven is newly defined. In addition, the newly changed relationship between Humanity and Heaven is presented as the principle of 'divine beings and human beings mutually guide one another (神人依導).' This principle clearly expresses 'human affairs' in the context of Daesoon Thought. Accordingly, the two directions in which 'human affairs' are completed are expressed as two stages: spiritual enlightenment (靈通) and the Harmonious Union between Divine Beings and Human Beings (神人調化). These two directions in which 'human affairs' pursues 'the Way of Heaven' show a depth beyond just encompassing transcendence and immanence. The relationship between 'the Way of Heaven' and the Supreme God of the Ninth Heaven, in particular, is a useful point for appreciating the how the meaning of 'human affairs' in Daesoon Thought differs from other uses of the term which occur elsewhere.

• Korean Chemical Engineering Research
• /
• v.47 no.5
• /
• pp.615-619
• /
• 2009

(+)-$Tr{\ddot{o}}ger$'s base in $Tr{\ddot{o}}ger$'s base racemates that inhibits thromboxane A2($T{\times}A2$) synthase has been used to treat arteriosclerosis. Separation of (+)-$Tr{\ddot{o}}ger$'s base by chromatography has become a major concern. However separation experiments of (+)-$Tr{\ddot{o}}ger$'s base need time and consumables so that simulation with Aspen Chromatography could save time and costs by predicting the efficiency of separation. Injection amount and eluent flow rate were varied to compare the resolutions and yields of TB(-) and TB(+). Highest resolution and yield were attained at the eluent rate of 0.25 mL/min. Isotherms representing the relationship between mobile phase concentration and stationary phase concentration were changed to get the best separation with Ideal Adsorbed Solution(IAS) Statistical Lanmuir isotherms.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.1
• /
• pp.49-54
• /
• 2010

Fretting wear behavior under elastic deformable contacts was experimentally examined by using a simulated dual cooled fuel rod and its supporting structure. As this fuel rod has larger outer diameter than the typical solid rod to accommodate sufficient internal flow, new supporting structure geometries should be designed and their reliabilities (i.e. vibration characteristics, fretting wear resistance, etc.) are also examined with both analytical and experimental methods. In this study, the supporting structure characteristics and fretting wear behaviors are analyzed and examined by using one of the supporting structure candidates which has an embossing shape. The supporting structure characteristics were examined by using a specially designed test rig and their results were compared with that of analytical method. Based on the test results, the relationship between the supporting structure characteristics and their fretting wear behaviors was discussed in detail.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.4 s.70
• /
• pp.335-345
• /
• 2005

This paper concentrates on the nonlinear analysis of prestressed concrete (PSC) containment structures. Unlike a commercialized program which adopts the perfect bond assumption between concrete and tendon in the analysis of PSC structures, a numerical algorithm to consider the slip effect, simultaneously with the use of commercialized programs such as DIANA and ABAQUS, is introduced in this paper For bonded tendons, the apparent yield stress of an embedded tendon is determined from the bond slip relationship. And for unbonded tendons, Correction for the strength and stiffness of unbonded internal tendons is achieved on the basis of an iteration scheme derived from the slip behavior of tendon along the entire length. Finally, the developed algorithm is applied to two PSC containment structures of PWR and CANDU to verify its efficiency and applicability in simulating the structural behavior of large complex structures, and the obtained result shows that both containment structures represent the ultimate pressure capacity larger than about 3 times of the design pressure.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.8
• /
• pp.799-807
• /
• 2010

Direct numerical simulations (DNS) of turbulent channel flow for which the drag is reduced by using polymer additives have been performed by a pseudo-spectral method. The Reynolds number based on the friction velocity and half-channel height is 395, and the polymeric stresses due to the polymer additives are evaluated using the FENE-P (finitely extensible nonlinear elastic-Peterlin) model. The numerical results show that the drag reduction rate is significantly affected by the parameters used in the FENE-P model, such as the maximum extensibility and relaxation time of the polymer molecules. The turbulence data for both low- and high-drag reduction regimes are analyzed. In addition, the effects of FENE-P model parameters on the flow characteristics have been investigated for the same drag reduction rate due to the polymer additives. Finally, the present DNS results have been used to verify the correlation between rheological parameters and the extent of drag reduction, which was suggested by Li et al. (2006).

• Composites Research
• /
• v.30 no.6
• /
• pp.371-378
• /
• 2017

In this study, hygroelastic behavior of thermosetting epoxy is predicted by molecular dynamics simulations. Since consistent exposures to humid environments lead to macroscopic degradation of polymer composite, computational simulation study of the hygroscopically aged epoxy cell is essential for long-time durability. Therefore, we modeled amorphous epoxy molecular unit cell structures at a crosslinking ratio of 30, 90% and with the moisture weight fraction of 0, 4 wt% respectively. Diglycidyl ether of bisphenol F (EPON862) and triethylenetetramine (TETA) are chosen as resin and curing agent respectively. Incorporating equilibrium and non-equilibrium ensemble simulation with a classical interatomic potential, various hygroelastic properties including diffusion coefficient of water, coefficient of moisture expansion (CME), stress-strain curve and elastic modulus are predicted. To establish the structural property relationship of pure epoxy, free volume and internal non-bond potential energy of epoxy are examined.

• Journal of Conservation Science
• /
• v.32 no.1
• /
• pp.51-61
• /
• 2016

'Eojin', king's portraits, had been produced during the Joseon dynasty. The portrait of King Taejo, the founder of the Joseon dynasty, remain at National Palace Museum of Korea and Gyeonggijeon portrait hall in Jeonju and Junwonjeon portrait hall in North Korea that has been recorded in original glass plate photo in 1911. Many replica of Eojin have been made since it is important to preserve and protect original one. In this study, the portrait of King Taejo, which is possessed by National Palace Museum of Korea, was researched for making replication standard version of the original form. It was focused on derivations of each artefacts and drawing lines those had been described on the picture including comparison among three portraits of King Taejo. Producing the replication standard version of King Taejo's portrait, the digital restoration techniques by the method of partition area scanning was applied. Accurate and precise detail result that is taken by digital imaging technique gives additional information regarding the relations among three portraits of King Taejo.