• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.6
• /
• pp.219-225
• /
• 2011

Advanced composite structures are too difficult for such design engineers for construction and some simple but accurate enough methods are necessary. The simply supported laminated plates are analyzed by the specially orthotropic laminates theory. This method, however, may be too difficult for some practising engineers. In this paper, the result of analysis for such plate by means of the beam theory with unit width is reported. The plate aspect ratio considered is from 1 : 1 to 1 : 5. Most of the bridge and building slabs on girders have large aspect ratios. For such cases further simplification is possible by neglecting the effect of the longitudinal moment terms($M_x$) on the relevant partial differential equations of equilibrium. In this paper. the influence of the aspect ratio on the natural frequency of the specially orthotropic laminated plates is studied and it is concluded that the method used is sufficiently accurate for engineering purposes. The result of this paper can be used for simply supported laminated plates analysis.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.88-88
• /
• 2020

수심평균 2차원 혼합모형은 하천환경에서 다양한 용존성 오염물질의 혼합현상을 모의하기 위해 널리 활용되어왔다. 2차원 혼합모형에서 분산계수는 하천의 전단 흐름에 의해 야기되는 오염물질의 퍼짐 현상을 표현하는 중요한 인자로서 작용하기 때문에 정교한 오염물질 혼합거동을 모의하기 위해서는 적합한 분산계수를 산정하는 것이 필수적이다. 분산계수를 실험적으로 산정하는 방법으로는 크게 모멘트법과 추적법으로 나뉘며, 비정상상태의 혼합거동에 대해 종방향 및 횡방향 분산계수를 동시에 산정할 수 있는 방법은 추적법 계열의 2차원 유관추적법(2D STRP)이 유일하다. 본 연구에서는 하천에 유입된 오염물질의 2차원 혼합해석을 위한 수치모형을 개발하였으며, 개발된 모형의 수치해를 바탕으로 다양한 Peclet 수의 범위에 대해 기존연구에서 제시된 2D STRP의 적용범위 및 성능을 정량적으로 분석하였다. 분석된 정보를 바탕으로 기존 2D STRP의 한계를 극복하기 위한 개선된 2차원 유관추적법(2D STRP-i)을 개발하고, 사행하천을 모형화한 실규모 하천실험시설에서 검증하였다. 기존 2D STRP의 성능평가 결과, Peclet 수가 낮은 조건일수록 농도분포의 예측 정확도가 감소하는 경향을 보였으며, 하안 경계에 도달하는 농도가 증가할수록 부정확한 결과를 초래하는 것으로 나타났다. 본 연구에서는 기존 2D STRP의 한계를 보완하여 더욱 정확한 분산계수를 산정하고자 하안 경계면 조건을 고려한 2차원 유관추적법(2D STRP-i)을 개발하였다. 2D STRP-i는 직교-곡선좌표계 기반의 2차원 이송-분산 방정식을 바탕으로 횡방향 유속분포 및 하안 경계조건을 고려할 수 있도록 개선되었다. 2D STRP-i는 공간적으로 상이한 이송효과 및 하안경계 조건을 적절히 반영함으로써 농도분포의 예측 정확도를 개선 시키는 것으로 평가되었으며, 하안경계면에서 농도가 증가하는 구간에서 기존 2D STRP의 결과와 비교하여 더욱 정확한 농도분포 및 분산계수를 제공하는 것으로 밝혀졌다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.1
• /
• pp.83-90
• /
• 2009

In this paper, the problem of electromagnetic transmission through slits in two parallel conducting plates which separate two half spaces is considered. The coupled integral equations for the electric field distributions over the slits are developed for the case that the TM polarized plane wave is incident on the slit and solved by the method of moments. The transmitted power beyond the slit-perforated conducting parallel plates is computed in order to check the variations of the coupled power through slits against some parameters such as the incident angle of the TM polarized wave, slit width, lateral distance between two slits, and distance between the conducting plates. When the lateral distance between two slits approaches near the multiples of half wavelengths, the transmission resonance (maximum power transmission) is observed. If the slit width in the incident side is narrow and the distance between conducting plates is small compared to the wavelength, the maximum of transmitted power is observed to be nearly independent of the incident angle and slit width. In addition, the mechanism of the transmission resonance in the present geometry is explained using a simplified geometry and its equivalent circuit.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.5 s.122
• /
• pp.415-426
• /
• 2007

In a link motion punch press, numerous links are interconnected and each link executes a constrained motion at high speed. As a consequence, dynamic unbalance force and moment are transmitted to the main frame of the press, which results in unwanted vibration. This degrades productivity and precise stamping work of the press. This paper presents an effective method for reducing dynamic unbalance in a link motion punch press based upon kinematic and dynamic analyses. Firstly, the kinematic analysis is carried out in order to understand the fundamental characteristics of the link motion mechanism. Then design variable approach is presented in order to automate the model setup for the mechanism whenever design changes are necessary. To obtain the inertia properties of the links such as mass, mass moment of inertia, and the center of mass, 3-dimensional CAD software was utilized. Dynamic simulations were carried out for various combinations of design changes on some links having significant influences on kinematic and dynamic behavior of the mechanism.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.2
• /
• pp.68-74
• /
• 2000

The problem of electromagnetic coupling through a narrow slit in a parallel-plate waveguide(PPW) covered by a dielectric slab with a conducting strip on the slab is considered for the case that the TEM wave is incident in the PPW. Coupled integral equations for the tangential electric field in the slit and the induced current over the strip are derived and solved numerically by use of the method of moments. In order to show the effect of the conducting strip on the coupling, some numerical results for the reflected and transmitted powers in the guide, the coupled power through the slit, the equivalent slit admittance, and radiation pattern are presented. From the results, it is observed that the maximum available power coupled through the slit exterior to the PPW amounts upto 50% of the incident power in the PPW.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.3
• /
• pp.291-302
• /
• 2005

Due to the importance of the parameter in structural response, the uncertain elastic modulus was located at the center of stochastic analysis, where the response variability caused by the uncertain system parameters is pursued. However when we analyze the so-called stochastic systems, as many parameters as possible must be included in the analysis if we want to obtain the response variability that can reach a true one, even in an approximate sense. In this paper, a formulation to determine the statistical behavior of in-plane structures due to multiple uncertain material parameters, i.e., elastic modulus and Poisson's ratio, is suggested. To this end, the polynomial expansion on the coefficients of constitutive matrix is employed. In constructing the modified auto-and cross-correlation functions, use is made of the general equation for n-th moment. For the computational purpose, the infinite series of stochastic sub-stiffness matrices is truncated preserving required accuracy. To demons4rate the validity of the proposed formulation, an exemplary example is analyzed and the results are compared with those obtained by means of classical Monte Carlo simulation, which is based on the local averaging scheme.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.12
• /
• pp.15-21
• /
• 2000

In this study, the electromagnetic coupling through a narrow slit in the upper wall of a short-ended parallel-plate waveguide(PPW) covered by a dielectric slab with a nearby conducting strip on the slab Is considered for the case that the TEM wave is incident in the PPW. Coupled integral equations whose unknowns are the slit electric field and the induced electric current over the strip are derived and solved numerically by use of the method of moments. From results, it has been observed that most of the incident power can be coupled exterior to the guide by appropriately setting the strip width and position, though the slit is very narrow. In addition, the differences between the radiation phenomena, observed in the cases that the conducting strip and the upper Plate of the PPW form a cavity and that strip behaves like a parasitic element, are discussed.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.1 s.34
• /
• pp.125-135
• /
• 1998

This study presents a design method for three-span continuous preflex composite girder bridges (3S-PCB) which imposes prestresses in the negative moment region by lifting or lowering interior supports and the design method is automated by a computer program which incorporates optimal design procedure. The objective function for the design of 3S-PCB minimizes the cost of construction materials and the constraint functions represent the limited dimensions of the design section and the allowable stress for each structural member as given in the specifications. Optimal design procedure used in this study is a modification of existing sequential unconstrained minimization technique (SUMT), a numerical analyses procedure for two-span continuous preflex composite bridges. The optimized design sections determined for each span length are compared with those of simple preflex composite beams (SPCB) and the optimal girder depth is determined by defining the relationship between girder depth and construction material costs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.447-455
• /
• 2006

A general purpose of 4-node co-rotational resultant shell element is developed for the solution of nonlinear problems of reinforced concrete, steel and fiber-reinforced composite structures. The formulation of the geometrical stiffness presented here is defined on the mid-surface by using the second order kinematic relations and is efficient for analyzing thick plates and shells by incorporating bending moment and transverse shear resultant forces. The present element is free of shear locking behavior by using the ANS (Assumed Natural Strain) method such that the element performs very well as thin shells. Inelastic behaviour of concrete material is based on the plasticity with strain hardening and elasto-plastic fracture model. The plasticity of steel is based on Von-Mises Yield and Ivanov Yield criteria with strain hardening. The transverse shear stiffness of laminate composite is defined by an equilibrium approach instead of using the shear correction factor. The proposed formulation is computationally efficient and versitile for most civil engineering application and the test results showed good agreement.

• Composites Research
• /
• v.32 no.5
• /
• pp.284-289
• /
• 2019

In the present paper, the dynamic force-moment equilibrium equations, driving power and energy equations are analyzed to formulate the equation for fuel economy(km/liter) equivalent to the driving distance (km) divided by the fuel volume (liter) of the vehicle, a selected model of gasoline powered KIA K3 (1.6v). In addition, the effects of the dynamic parameters such as speed of vehicle (V), vehicle total weight(M), rolling resistance ($C_r$) between tires and road surface, inclined angle of road (${\theta}$), as well as the aerodynamic parameters such as drag coefficient ($C_d$) of vehicle, air density(${\rho}$), cross-sectional area (A) of vehicle, wind speed ($V_w$) have been analyzed. And the possibility of alternative materials such as lightweight metal alloys, fiber reinforced plastic composite materials to replace the conventional steel and casting iron materials and to reduce the weight of the vehicle has been investigated by Ashby's material index method. Through studies, the following results were obtained. The most influencing parameters on the fuel economy at high speed zone (100 km/h) were V, the aerodynamic parameters such as $C_d$, A, ${\rho}$, and $C_r$ and M. While at low speed zone (60 km/h), they are, in magnitude order, dynamic parameters such as V, M, $C_r$ and aerodynamic ones such as $C_d$, A, and ${\rho}$, respectively.