• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.9
• /
• pp.73-80
• /
• 2005

This paper addresses a newly proposed start-up method of the HAUSAT-2 momentum wheel. The HAUSAT-2 is a 25kg class nanosatellite which is stabilized to earth pointing by 3-axis active control method. A momentum wheel performs two functions. It provides a pitch-axis momentum bias while measuring satellite pitch and roll attitude. Pitch control is accomplished in the conventional way by driving a momentum wheel in response to pitch attitude errors. Precession control and nutation damping are provided by driving the pitch axis magnetic torquer. A momentum wheel is nominally spinning at a particular rate and changes speed. This simulation study investigates the feasibility and performance of a proposed strategy for starting-up the wheel. A proposed strategy to start-up the wheel shows that a pitch momentum wheel can be successfully started-up to its nominal speed from rest and be stabilized to nadir pointing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.7
• /
• pp.669-677
• /
• 2009

In general, the pitch momentum biased system that induces inherently nutational motion in roll/yaw plane, has been adapted for geosynchronous communications satellites. This paper discusses the method of roll attitude control using yaw axis momentum management method for a low earth orbit(LEO) satellite which is a pitch momentum biased system equipped with only two reaction wheels. The robustness of wheel momentum management method with PI-controller is investigated comparing with wheel torque control method. The transfer function of roll/yaw axis momentum management system that is useful for attitude controller design is derived. The disturbance effect of roll/yaw axis momentum management system for attitude control is investigated to identify design parameters such as magnitude of momentum bias and to get the insight for controller design. As an example, the PID controller design result of momentum management system for roll/yaw axis control is provided and the simulation results are presented to provide further physical insight into the momentum management system.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.57-63
• /
• 2013

The mission of a lot of satellites on geostationary orbit is the communication and/or the broadcasting. These satellites need a big power, so these have a large solar array. Recently, the new satellite for Earth environment monitoring is developing on geostationary orbit. The payload of Earth monitoring satellite requires better thermal condition on detector. Therefore this satellite uses a boom for the attitude stability instead of rejecting one-side solar array as a heat source. The other hand, it uses some momentum wheels being a more momentum capacity to control the large disturbance by solar pressure due to the asymmetric solar array configuration. In this paper, the analysis on the wheel allocation and the wheel off-loading for COMS is summarized and the results are verified by telemetry of COMS. COMS has no boom and a perfectly asymmetric solar array configuration, and it is operating well on geostationary orbit.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.5
• /
• pp.371-378
• /
• 2019

High precision pointing satellite uses the reaction wheels for the attitude control and their momentum dumping is performed by the three magnetic torquers. In this paper, the effects of one magnetic torquer's failure on the momentum dumping will be reviewed. When the satellite on the high inclination angle orbit holds LVLH (Local Vertical Local Horizontal) attitude, pitch axis magnetic torquer failure causes the momentum dumping failure. But in case of other torquer's failure, momentum dumping is still possible with degraded dumping performance. When pitch axis magnetic torquer fails, momentum dumping is possible by changing the satellite attitude. This paper propose the satellite attitude change to make the momentum dumping possible when pitch axis magnetic torquer fails. In addition, if torquer arrangement is modified, momentum dumping is always possible regardless of any torquer's failure.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.3
• /
• pp.85-94
• /
• 2003

A geosynchronous Satellite in general, has two momentum management logics to maintain its wheel momentum tin the stable region. The one is applied in order to control accumulative wheel momentum in the momentum dumping mode and the other is utilized in order to control attitude errors during the stationkeeping. In this paper, the momentum management logics are explained for dumping/sationkeeping mode and the logics are verified by simulation on the 3 attitude subsystem.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.100-100
• /
• 2003

다목적실용위성 1호의 자세제어는 추력기를 이용한 방법과 반작용 휠을 이용한 방법으로 나눌 수 있다. 추력기를 이용한 방법은 위성이 안전모드에 진입하거나 궤도조정시 이용되며, 정상 운영모드에서 촬영임무를 수행할 때는 반작용 휠을 이용하여 위성의 자세를 제어하고 있다. 자세제어는 제로 모멘텀 바이어스(Zero Momentum Bias)를 이용하여 3축 제어방식을 사용하고 있다. 지구센서(CES, Conical Earth Sensor)와 자이로(Gyro)를 통하여 얻은 자세정보를 이용하여 위성의 탑재컴퓨터에서 제어로직을 수행하면 MDE(Motor Drive Electronic)를 통해 모멘텀을 입력받아 반작용 휠의 회전속도를 변화 시켜 자세제어를 수행한다. 본 논문은 위성의 임무기간 동안 반작용 휠을 이용하여 자세제어를 수행한 결과를 바탕으로 위성의 제로 모멘텀 바이어스를 통한 자세제어계의 변화를 분석하여 향후 연장 임무기간 동안 발생할 수 있는 운영상의 문제점을 확인하고, 이에 대한 조치 방법과 자세제어계의 운영 방안을 제시하고 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.2
• /
• pp.147-158
• /
• 2020

In this paper, we will review the thruster based reaction wheel momentum dumping method for low Earth orbit satellite. Thruster based momentum dumping is widely used in GEO satellites by performing momentum dumping and attitude control using thrusters at the specific time. LEO satellite should perform momentum dumping at any time, thus it is not appropriate to use GEO satellite's momentum dumping method. In this research, we will review the method for LEO satellite, which perform momentum dumping always and use reaction wheels for attitude control during dumping. To reduce thruster's valve on and off counts, we propose to use the maximum pulse width for thruster operation. To prevent attitude error increase by thrusters, we adjust the thruster operation interval. Through simulation, we verify the proposed method's effects.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.65-73
• /
• 2006

When a satellite separates from the launch vehicle, an initial high angular rate or a tip-off rate is generated. B-dot logic is generally used for controlling the initial tip-off rate. However, it has the disadvantage of taking a relatively long time to control the initial tip-off rate. To solve this problem, this paper suggests a new detumbling control method to be able to adapt to micro/nanosatellite with the pitch bias momentum system. Proposed detumbling method was able to control the angular rate within 20 minutes which is significantly reduced compared to conventional methods. Since the previous wheel start-up method cannot be used if the detumbling controller proposed by this paper is used, a method is also proposed for bringing up the momentum wheel speed to nominal rpm while maintaining stability in this paper. The performance of the method is compared and verified through simulation. The overall result shows much faster control time compared to the conventional methods, and achievement of the nominal wheel speed and 3-axes stabilization while maintaining stability.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.2
• /
• pp.107-119
• /
• 2013

We study three axis attitude control method including two axis high agile maneuver using four reaction wheels and two control moment gyros. We investigate singularity conditions due to two control moment gyros and propose singularity escape method. Based on this, we propose actuator control algorithm for high agile maneuver. Also, we propose actuator momentum management method which preserves momentum of reaction wheels and control moment gyroscopes before and after satellite attitude control. Through numerical simulation, we show that our method achieves three axis attitude control including two axis high agile maneuver and preserves actuators' momentum.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.9
• /
• pp.760-766
• /
• 2018

Due to external disturbances on the satellite, unwanted momentum is accumulated on reaction wheels. To remove this momentum, three magnetic torquers which are installed along the satellite's axes are used. The magnetic torquers generated torque indirectly by interactions with the earth's magnetic field. Thus, during momentum dumping, we should consider both the magnetic torquer and the earth's magnetic field generated on the magnetic torquers at the same time. When low earth orbit satellite with high inclination angle holds nadir pointing attitude, weak earth's magnetic field is generated along the satellite's pitch axis. In this case, one magnetic torquer is overloaded and momentum dumping performance is degraded. This research will review the method to improve the momentum dumping performance by adjusting magnetic torquers arrangement.