• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.208-209
• /
• 2003

고밀도 광집적회로의 광도파로는 단일모드 광섬유와 굴절률의 차이 및 코어 크기에 의해 모드 부정합 문제가 존재한다. 본 논문은 이러한 모드 부정합 문제를 해결할 수 있는 모드 크기 변환기를 설계 하고 3-D Beam Propagation Method (BPM)을 이용하여 분석하였다. 모드 크기 변환기술에는 마이크로 렌즈, 테이퍼 광섬유, 렌즈화 광섬유가 사용되고 있으나 이는 패키징 가격이 높으며 광섬유와의 정렬 문제가 존재하므로, 집적된 실리콘 기판위에 제작하는 모드 크기 변환기에 대한 연구가 다각도에서 시도되고 있다. (중략)

• The Korean Journal of Applied Statistics
• /
• v.29 no.5
• /
• pp.787-806
• /
• 2016

Mixed-mode (MM) designs in which data are collected by different modes in one design have become increasingly popular. An MM data collection has several advantages such as reductions of coverage error, non-response and cost. However, MM designs may introduce mode effects that are confounded by selection effects and measurement effects, which can make MM data quality poor. In order to investigate mode effects, SRI implemented a concurrent mixed-mode experiment in 2014 where respondents could choose between a self-administrated Web survey and a self-administrated paper survey. This paper separately estimates selection effects and measurement effects. We found that measurement effects on some items are large.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.22-27
• /
• 2004

In this paper, we designed a mode size converter to reduce coupling loss between optical waveguide and single mode fiber. The proposed mode converter is composed of periodically segmented tapered waveguide to achieve small size and easy fabrication. For the optimally designed mode size converter at 1550nm, the taper length is 500(equation omitted), the segmentation period 5ß:, the waveguide width of fiber contact section 1.3ß:, and duty cycle 0.95. The coupling loss of the optimized mode size converter is 0.33㏈/point, which is 1.27㏈/point lower than that without the mode size converter.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.12
• /
• pp.43-49
• /
• 2004

In this paper, we have designed a mode size converter to reduce coupling loss between super-high delta silica optical waveguides and single mode fibers. The new mode size converter has three design aspects; periodically segmented taper waveguide for minimal size, lateral taper waveguide for simple fabrication, and surrounding trenches to improve coupling loss. In the optimal mode size converter design, coupling loss is 0.33dB/point without trenches and 0.2dB/point with trenches.

• Computational Structural Engineering
• /
• v.25 no.3
• /
• pp.43-48
• /
• 2012

• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.228-234
• /
• 2002

We report theoretical investigation on the polarization selective coupling characteristics of a side-polished fiber directional coupler with a thin metal interlayer. Based on normal mode theory the coupling properties of the device under various structural conditions are analyzed. It is shown that the coupling strength between TE modes weakens rapidly with increase or metal interlayer thickness, whereas that between TM modes becomes stronger. The design conditions of the polarization splitter using the coupler to achieve high extinction ratio and low insertion loss are presented.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.7-12
• /
• 2007

Swirl injector with multi-stage tangential entry was analyzed to suppress high-frequency combustion instability in Liquid Rocket Engines. In order to analyze the effect of swirl injector as an acoustic absorber, swirl injector was regarded as a quarter-wave resonator and it's damping capacity is verified in atmospheric temperature. It has a finite mode of vibration and natural frequencies which can be tuned to the natural frequencies of a model combustion chamber. When the targeted injector for each modes is located at anti-node point, the amplitude of modes was decreased. And when the injector of large diameter is mounted, the split of mode which accompanies the decrease of amplitude appeared. From the experimental data, it is proved that if the location of injector mounted is located at an anti-node position of the targeted modes with proper volume, the amplitude of modes is decreased and the split of modes occurs at anti-node point.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.23-24
• /
• 2015

청소 능력을 향상시키기 위해 높은 출력을 갖는 흡입 모터를 탑재한 로봇 청소기의 경우 계통에 연결하여 동작하는 유선 모드와 계통과 분리되어 무선 모드로 동작이 가능하다. 고출력 모터를 구동하기 위하여 듀얼 모드 로봇 청소기는 고용량의 배터리가 필요하고, 그에 따라 배터리 충전기의 용량 또한 증가되어야 한다. 본 논문에서는 듀얼 모드 로봇청소기의 동작 모드를 분석하여 유/무선 동작 및 배터리 충전이 가능한 800W급 전력 변환 장치를 개발하였다.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.32-33
• /
• 2017

기존 EMI 필터 설계의 경우, 설계 가이드 없이 반복적인 측정을 통해 규제를 만족하도록 설계하기 때문에 많은 시간을 소모하게 된다. 또한 필터 내의 불필요한 소자 사용으로 인해 회로의 부피 및 가격 상승의 문제점이 있다. 따라서 본 논문은 대상 시스템에 대한 노이즈를 공통모드 노이즈(Common Mode Noise)와 차동모드 노이즈(Differential Mode Noise)로 분리하여 측정하였으며, 등가회로 모델링 및 제안 설계 가이드를 통해 최적 EMI 필터를 설계하였다. 또한 제안 EMI 필터 설계방법을 통해 설계 시간 단축, EMI 필터 단가 및 부피 저감이 가능하게 된다. 본 논문에서는 제안 방법을 이론으로 분석하고 모의실험을 통해 확인하였으며, 실제 측정을 통해 제안 방식의 우수성을 검증하였다.

• Journal of the Korean Institute of Gas
• /
• v.23 no.4
• /
• pp.19-27
• /
• 2019

The consumption of liquefied natural gas (LNG) has increased annually due to the strengthening of international environmental regulations. In order to produce stable and efficient LNG, it is essential to divide the global (overall) operating condition and construct a quick and accurate monitoring system for each operation condition. In this study, multi-mode monitoring system is proposed to the LNG plant fractionation process. First, global normal operation data is divided to local (subdivide) normal operation data using global principal component analysis (PCA) and k-means clustering method. And then, the data to be analyzed were matched with the local normal mode. Finally, it is determined the state of process abnormality through the local PCA. The proposed method is applied to 45 fault case and it proved to be more than 5~10% efficient compared to the global PCA and univariate monitoring.