• Composites Research
• /
• v.32 no.6
• /
• pp.327-334
• /
• 2019

The delamination is a special mode of failure occurring in composite laminates. Several numerical studies with finite element analysis have been carried out on the delamination behavior of unidirectional composite laminates. On the other hand, the fracture for the multi-directional composite laminates may occur not only along the resin-fiber interface between plies known as interply or interlaminar fracture but also within a ply known as interyarn or intralaminar fracture accompanied by matrix cracking and fiber bridging. In addition, interlaminar and intralaminar cracks appear at irregular proportions and intralaminar cracks proceeded at arbitrary angle. The probabilistic analysis method for the prediction of crack growth behavior within a layer is more advantageous than the deterministic analysis method. In this paper, we analyze the crack path when the mode I load is applied to the cross-ply carbon/epoxy composite laminates and collect and analyze the probability data to be used as the basis of the probabilistic analysis in the future. Two criteria for the theoretical analysis of the crack growth direction were proposed by analyzing the stress field at the crack tip of orthotropic materials. Using the proposed method, the crack growth directions of the cross-ply carbon/epoxy laminates were analyzed qualitatively and quantitatively and compared with experimental results.

• Korean Journal Plant Pathology
• /
• v.12 no.4
• /
• pp.395-401
• /
• 1996

국내의 고추, 사과, 포도, 스타티스(statice)에서 분리한 Glomerella cingulata 균주들의 병원성과 체세포화 합성군(vegetative compatibility group : VCG)과의 관계를 조사하였다. 사과, 포도, 스타티스에서 분리된 균주들은 전기주에 모드 병원성을 나타내었으나 고추에는 병원성이 없었다. 한편, 고추에서 분리된 균주들은 무상처접종시 병원성을 나타내지 못하였다. Nitrate nonutilizing(nit) mutant는 1.5%의 KClO\ulcorner을 첨가한 최소배지에서 선발하였다. nit mutnat들은 nit1, nit2, nit3, nitM의 4가지 표현형 중 하나에 속하였다. VCG는 표현형이 다른 nit mutan간의 대치배양을 통해 결정하였는데 사과, 포도, 스타티스에서 분리한 균주들간에는 같은 VCG를 나타낸 반면 고추에서 분리된 균주들은 다른 VCG로 나타났다. 따라서 G. cingulata 균주들의 체세포화합성은 병원성과 밀접하게 관련되어 있음을 알수 있었다. 또한 동일한 VCG에 속하며 기주가 다른 균주들의 대치배양시 heterokaryon을 형성했으나 자낭을 형성하지는 않았다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.8
• /
• pp.34-42
• /
• 2001

The 1${\times}$2, 1${\times}$4 and 1${\times}$8 multimode interference(MMI) optical power splitters are fabricated by using $Ag^+-Na^+$ ion exchange on BK7 glass. Before fabricating the MMI optical power splitters, we find the refractive index of the channel waveguide and calculate the multimode section length and width. The multimode section lengths and widths are 887${\mu}m$, 1666${\mu}m$ and 1834${\mu}m$ and 40${\mu}m$, 80${\mu}m$ and 120${\mu}m$ for 1${\times}$2, 1${\times}$4 and 1${\times}$8 MMI optical power splitters respectively. The measured properties of the fabricated MMI optical power splitters show that the unbalance ratios of the 1${\times}$2, 1${\times}$4 and 1${\times}$8 MMI optical power splitters are 1.4[dB], 1.7[dB] and 2.0[dB] and the excess losses of those sre 0.96[dB], 2.26[dB] and 1.67[dB]. respectively.

• Composites Research
• /
• v.29 no.2
• /
• pp.45-52
• /
• 2016

An understanding of the failure mechanisms of the adhesive layer is decisive in interpreting the performance of a particular adhesive joint because the delamination is one of the most common failure modes of the laminated composites such as the fiber metal laminates. The interface between different materials, which is the case between the metal and the composite layers in this study, can be loaded through a combination of fracture modes. All loads can be decomposed into peel stresses, perpendicular to the interface, and two in-plane shear stresses, leading to three basic fracture mode I, II and III. To determine the load causing the delamination growth, the energy release rate should be identified in corresponding criterion involving the critical energy release rate ($G_C$) of the material. The critical energy release rate based on these three modes will be $G_{IC}$, $G_{IIC}$ and $G_{IIIC}$. In this study, to evaluate the fracture behaviors in the fracture mode I and II of the adhesive layer in fiber metal laminates, the double cantilever beam and the end-notched flexure tests were performed using the reference adhesive joints. Furthermore, it is confirmed that the experimental results of the adhesive fracture toughness can be applied by the comparison with the finite element analysis using cohesive zone model.

• Composites Research
• /
• v.23 no.4
• /
• pp.21-27
• /
• 2010

In most engineering structures, fracture often takes place due to fatigue. Therefore, many studies about the effect of the various mode-mixities on fatigue characteristics have been performed. However, most of the former studies only address metal/metal interfaces or delamination of composite. In this study, the fatigue characteristics of composite/metal interfaces are investigated. The fatigue tests were performed using single leg bending(SLB)specimens that comprise composite and steel bonded to each other using co-cure bonding method. This paper focuses on fatigue characteristics depending on different mode ratios$(G_{II}/G_T$. The overall results obtained in this study show that the crack propagation rate increases with the mode II loading component.

• 한국해양학회지
• /
• v.30 no.1
• /
• pp.1-12
• /
• 1995

The modal analysis was carried out for the total of 216 subface sediments of southern continental shelf of Korean peninsula. Sandy mud or muddy sand distributed in the range of 70∼100 m water depth revealed the bimodal type (sand and mud components). The relations of textural parameters obtained from every modal were consistent with those of shallow marine sediments. The characteristics of sand component between bimodal were as follows: (1) the distributions of mean grain size, sorting, shell content were repeatedly distributed like the directions of depth contour lines. (2) Sand component was composed of medium to fine sand (Mz, 1-3$\psi$) containing many shell fragments, a few pebbles, and iron-stained quartz. (3) The surface of quartz revealed the concordial breakage and V-shaped features formed at high energy environment. (4) In CM-pattern, sand component was plotted in rolling and bottom suspension area. These characteristics imply that sand component probably derives from shoreface sediments deposited at the beach environment.

• Journal of the Korean Institute of Gas
• /
• v.23 no.4
• /
• pp.19-27
• /
• 2019

The consumption of liquefied natural gas (LNG) has increased annually due to the strengthening of international environmental regulations. In order to produce stable and efficient LNG, it is essential to divide the global (overall) operating condition and construct a quick and accurate monitoring system for each operation condition. In this study, multi-mode monitoring system is proposed to the LNG plant fractionation process. First, global normal operation data is divided to local (subdivide) normal operation data using global principal component analysis (PCA) and k-means clustering method. And then, the data to be analyzed were matched with the local normal mode. Finally, it is determined the state of process abnormality through the local PCA. The proposed method is applied to 45 fault case and it proved to be more than 5~10% efficient compared to the global PCA and univariate monitoring.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1885-1894
• /
• 1999

The higher mode cutoff frequencies in Crawford TEM cells computed by the Galerkin method(GM) describe in this paper. The authors also report the half mode boundaries to solve not only the cut-off frequencies of symmetric TEM cells and those of asymmetric TEM cells. It is shown that the measured resonant frequencies of the present symmetric TEM cells and a designed asymmetric TEM cell are agreed with the calculated results.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.479-481
• /
• 2008

마이크로그리드 시스템은 계통측에 문제가 발생하게 되면 계통과 분리되어 독립운전 모드로 동작하게 된다. 이때 마이크로소스들은 계통운전원의 제어신호없이 빠르게 마이크로그리드 내 부하들의 전력수요를 담당하여야 하며, 전력품질을 유지하면서 운전되어야 한다. 이 논문은 마이크로그리드가 독립운전 모드로 전환하여 운전되거나 독립운전 모드에서 부하 변동이 발생될 경우, 주파수를 일정하게 유지하면서 마이크로소스와 부하와의 전력수급 균형을 맞추기 위한 제어 방법을 제시하였다. 그리고 마이크로그리드에의 적용가능성을 알아보기 위하여 전력계통 과도현상 분석용 수치해석 프로그램인 EMTP/RV를 이용하여 모델링하고 시뮬레이션 하였다.

• Composites Research
• /
• v.12 no.3
• /
• pp.66-74
• /
• 1999

A modified mixed mode bending test was performed to investigate the mixed mode delamination for carbon/epoxy composite material. Various mixed mode ratios could be produced by changing the applied load position on the loading lever and the bending load position on the specimen. The modified mixed mode bending test was analyzed to obtain strain energy release rates using beam theory, compliance method and finite element method, This results were in good agreement with the experimental result, which confirmed the validity of this test.