• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.325-331
• /
• 2013

In this study, a complex eigenvalue analysis is implemented to verify the unstable mode of a brake system using ABAQUS software. The component participation factors and component modal participation factors are used to analyze the total contributions from each component and each component mode to a particular unstable system mode. This study shows that the 1.4-kHz unstable system mode comes from mode coupling between the 2nd nodal diametric mode and 3rd lateral axial mode (LAM) in the baseline model. A sensitivity analysis with a linking index is performed to prevent the mode coupling of the component modes. This linking index analysis shows the optimum mass loading position to move away the natural frequency of the 3rd LAM, which contributes to the unstable mode. Finally, a complex eigenvalue analysis is implemented with mass loading in the tie bar position, and no unstable system mode is generated in the low-frequency range (below 2 kHz).

• Journal of KSNVE
• /
• v.8 no.4
• /
• pp.690-699
• /
• 1998

This paper discusses the techniques, procedures and the results of the ground vibration test(GVT) performed on the development aircraft and the simple procedure of FE model updating technique from the GVT results. The GVT was carried out using random excitation technique with MIMO(Multi-Input-Multi-Output) data acquistion method, and taking full advantage of poly-reference global parameter estimation technique to identify the vibration modes. In dynamic FE modeling, the aircraft was represented by beam elements and all dynamic analysis was performed using MSC/NASTRAN for this model. In updating procedure, the stiffness of the beam model was adjusted iteratively so as to get the natural frequencies and mode shapes close to the GVT results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.604-605
• /
• 2008

Modal participation factor (MPF) is a widely used in a mode-coupling squeal noise problem for finding the most sensitive component over a complex brake system in a vehicle using eigenvectors of sub-components. This methodology requires the problematic total response of system by the unstable squeal noise at a specific frequency as well as eigenvectors of each component belonging to brake system. In this paper, a unit-force response analysis is performed for intact total system to obtain eigenvectors of each component and then such data is directly used for the contribution analysis of a squeal noise problem. Since the eigenvectors of each component induced from virtual unit-excitation is most reliable owing to the intact boundary condition, it can be expected that the corresponding contribution analysis with MPF also provides a trustworthy result.

• Electrical & Electronic Materials
• /
• v.27 no.10
• /
• pp.11-21
• /
• 2014

1975년 이후로 태양전지 평가 실험실과 제조업체들이 직접적으로 많은 노력을 하여 태양전지 모듈에 대한 가속 스트레스 평가를 개발하고 평가하였다. 이 노력들은 이미 알려진 불량 메커니즘을 토대로 모듈 디자인의 민감한 취약 부분을 발견하기 위한 평가를 목적으로 평가 순서/방법 표준화에 많은 기여를 하였다. 이러한 평가 순서/방법은 국가와 국제 모듈 규격 표준화에 적용되었다. 그리고, 실제 외부에서 설치되어 한 번도 문제가 발생되지 않은 평가들은 중간에 제거 되기도 하였다. 가장 대표적인 예로 twist test는 모듈 설치 후 발생되는 불량에 대한 평가이지만, 실제로 불량은 한번도 발견되지 않았다. 덧붙여서, 표준 평가들은 많은 특화된 가속평가를 사용하게 되는데, 이는 문제점들을 조사하거나 특정 모듈 디자인에 대한 잠재적인 불량을 조사하기 위함이다. 실제 수명예측을 위한 가속평가는 가속 인자의 지식이 반드시 필요하지만, 태양전지 분야에서는 문헌이 많이 부족하다. 많은 연구자들이 85/85 DH 평가시간과 습한 지역에서 수년 간 사용된 모듈과의 상관관계를 만들기 위해 시도 하였다. 그리고 이 모델은 DH 평가 표준시간인 1,000시간으로 정의하는데 많은 영향을 미치기도 했다. 하지만, 이 모델은 단지 단일 모드 불량일 경우에만 적용이 되는 것이다. 다른 불량에 대한 가속인자들은 여전히 잘 알려져 있지 않다. 따라서, 모듈이 비록 표준 규격시험을 통과했다고 하더라도 제품이 특정 기간 동안 전력을 생산할 수 있다고 말할 수 없다. 또한, 이 표준평가가 모든 불량 메커니즘에 대한 평가가 되지 않기 때문에 제품의 수명을 결정하는데 사용될 수 없다.

• Atmosphere
• /
• v.28 no.3
• /
• pp.305-315
• /
• 2018

This study investigates the characteristic spatial patterns and dynamic processes associated with the summertime extreme temperature events in South Korea during the last 20 years (1995~2014) using Self-Organizing Map (SOM). The classified SOM patterns commonly have high temperature and anticyclonic circulation anomalies over South Korea. The two major teleconnection patterns are identified: one is from the subtropical western North Pacific (WNP) affecting to the north and the other is from the North Atlantic (NA) affecting downstream region. The meridional teleconnection pattern is related to the forcing of positive sea surface temperature (SST) anomaly over the WNP. The northward propagating Rossby wave generates the East Asia-Pacific (EAP) pattern to form an anticyclonic circulation anomaly over South Korea. On the other hand, NA SST anomalies generate an eastward Rossby wave train across the Eurasian continent, leading to the development of an anticyclonic circulation anomaly over South Korea. The EAP pattern occurs more frequently in July and August, whereas the midlatitude teleconnection pattern associated with NA SST anomalies develops more frequently in early summer (June).