• Journal of Korea Water Resources Association
• /
• v.45 no.11
• /
• pp.1121-1130
• /
• 2012

Projected changes and their impacts on water quality are simulated in response to climate change stressors. CGHR (T63) simulation on the A1B scenario is converted to regional scale data using a statistical down-scaling method and applied to SWAT model to assess water quality impacts in Nakdong River basin. The results demonstrate that rainfall-runoff and pollutant loading in the future (2011~2100) will clearly increase as compared to the last 30-year average. The rate of pollutant loading increase is expected to continue its acceleration until 2040s. Runoff also shows similar patterns to the precipitation, increasing by 60%. Accordingly, the runoff increase results in escalation of pollutant loading by 35~45% for TSS and 5~20% for T-P. This phenomenon is more pronounced in the upper basin during winter and spring season.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1979-1985
• /
• 1999

In this paper, we offer an analysis method for SL/D/1/K queueing system, where the shifting-level (SL) process proposed in the part I of this study[1]. Since an exact analysis of SL/D/1/K queueing system is very difficult, we propose an approximation method, where the queze sizes at input state transition epochs is quantized and thus the name 'quantization reduction method'. We provide the upper and lower bounds of the approximation for the system size distribution also, In addition, since the continuos version of well-known DAR(1) model is a kind of SL process with exponential correlation term only, the proposed method can be directly applied to the analysis of DAR(1)/D/1/K queueing system as well.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.51-58
• /
• 2005

Moment frames have been widely used in building construction. In current design codes, concrete moment frames are classified into ordinary, intermediate, and special moment resisting concrete frames (OMRCF, IMRCF, SMRCF)). The objective of this study is to investigate the seismic behavior of columns in ordinary moment resisting concrete frames (OMRCF) and intermediate moment resisting concrete frames (IMRCF). For this purpose 3 story OMRCF and IMRCF buildings were designed and detailed in compliance to ACI 318 (2002) and KCI (1999). In this study the buildings were assumed to be located in seismic zone 1 classified by UBC (1997). This study considered the columns in the 1st story since these columns shall resist the largest axial and lateral forces during an earthquake. Eight 2/3 scale column specimens were made for representing the upper part and lower part of exterior and interior columns of the OMRCF and the IMRCF Quasi-static reversed cyclic loading was applied to each specimen with a constant or varying axial load. Test results show that seismic behaviors of columns are influenced by existence of lap splices, axial force levels, and lateral reinforcement at possible plastic hinging region. However, the effect of such variables strongly co-related to each other.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.508-514
• /
• 2018

An electroencephalogram (EEG) evaluates the electrical activity generated by brain cell interactions that occur during brain activity, and an EEG can evaluate the brain activity caused by hand movement. In this study, a 16-channel EEG was used to measure the EEG generated before and after hand movement. The measured data can be classified as a supervised learning model, a support vector machine (SVM). To shorten the learning time of the SVM, a feature extraction and vector dimension reduction by filtering is proposed that minimizes motion-related information loss and compresses EEG information. The classification results showed an average of 72.7% accuracy between the sitting position and the hand movement at the electrodes of the frontal lobe.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.17 no.2
• /
• pp.53-59
• /
• 2011

본 연구는 미국 텍사스 주의 소도시에 있는 스캇 앤 화이트 클리닉의 외부공간을 대상으로 하여 외래환자와 방문객들이 직면하는 길찾기의 문제점을 분석한다. 연구의 공간적 범위는 클리닉의 외부공간으로 한정하여 진입도로에서 진입하여 주차한 후 출입구에 도달하는 경로에서 관찰되는 행태적 특성을 분석한다. 분석의 초점은 진입도로에서 이루어지는 경로선택의 결정과 그것이 클리닉에 진입하기 위한 출입구 결정에 미치는 영향관계에 둔다. 분석은 외부공간에서의 길찾기에 관한 기존 연구문헌을 참고하여 작성한 연구모형에 의해 이루어진다. 구체적으로 보면, 이용자들이 보이는 날씨, 성별, 그리고 나이에 따른 길찾기 행태의 차이를 클리닉의 남동측 출입구와 남서측 출입구에서 발생하는 이용자들의 하차 빈도를 측정하였다. 또한 하차의 위치를 행태 지도에 기록하여 연구모델에 나타나는 상관성을 분석하였다. 길찾기 행태분석 결과를 통해 파악된 외부주차장에 주차한 후 클리닉에 접근하는 이용자들의 경로선택의 문제점과 클리닉의 입구 공간에서 하차한 이용자들의 입구선택에서 나타나는 문제점을 토대로 하여 외부공간에서 발생하는 길찾기 행위의 효율성을 증진시키기 위한 디자인 추천 사항을 다음과 같이 제시한다: (1) 시각적 단서를 제공하기 위해 남서쪽 출입구의 형태와 색채 차별화; (2) 도로에서 클리닉 진입공간에 위치한 안내판의 글자 크기 확대; (3) 학습된 길찾기 행태를 보조하기 위해 동쪽에 랜드마크 시설물 설치 및 목적 지점의 최종경관 개선; (4) 과도한 클리닉의 정보에 의해 감소되는 가독성을 고려하여 안내판의 정보 간략화; (5) 색채의 대조를 고려(출입구 벽에 설치된 클리닉의 이름이 갈색에 푸른색으로 설치되어 있어 색채의 대비가 낮아 가독성 떨어짐); (6) 클리닉 중앙 출입구의 하차 공간 상부에 설치된 캐노피 기둥의 과도한 크기에 의해 발생하는 가시공간의 감소에 의해 발생하는 하차 공간 사용의 혼잡 문제를 제거하기 위해 기둥규모 축소; (7) 하차점 6까지 캐노피를 확장하여 우천시에 발생하는 공간 사용의 문제점 제거; 그리고 (8) 올바른 하차공간 사용을 위해 진입 접근도로에 차선 설치.

• Journal of Advanced Navigation Technology
• /
• v.14 no.1
• /
• pp.87-92
• /
• 2010

The design of avionic embedded systems requires high-dependability. In this paper, we studied the dependability of the triple modular redundancy (TMR) hardware for highly reliable aviation embedded system. In order to evaluate the dependability of the base ARM processor and the TMR ARM processor, we developed the simulation model of the reduced ARM and TMR ARM processors and performed the simulation fault injection for the analysis of the dependability of the two targets. In the fault injection experiments, we calculated the error recovery rate of the two the processor models. From the experimental results, we could confirm that the reliability of the TMR ARM processor was greater than the single ARM processor by ten times in some cases.

• The Journal of Society for e-Business Studies
• /
• v.16 no.3
• /
• pp.169-190
• /
• 2011

The growth rates of manufacturer M, the domestic market leader in the infant formula and dairy industry, has slowed because of the market reduction which is caused by the falling birth rates, the increasing growth in import of foreign~made infant formula and fierce competition with other rivals in domestic market. In this situation, they find a way to make new opportunities of service innovation by using 'Open Collaboration Innovation Methodology(OCIM)'. As s result, they can provide their customers with the differentiated service which is created by collaborating with the external partners, exchanging the value each other and connecting the accumulated internal capabilities to the external resources. This study focused on the application of the Open Collaboration Innovation Methodology which is used to the manufacturer M's servicitization. Also it is described in the direction of forth study based on the limits that occurred when the M company use the methodology and the matters that have to be considered when other companies apply the methodology.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.9
• /
• pp.714-719
• /
• 2013

A turboprop aircraft for this study is required to operate at icing condition in order that it performs its given mission. So an air intake system of the turboprop aircraft should be designed and verified not only to provide the maximum possible total pressure at engine inlet at normal flight condition, but also to include an inertial separator which protects Foreign Object Debris (FOD) like ice or snow at icing condition from entering into the engine inlet screen which can cause or lead an catastrophic engine failure like engine flame-out or severe damage. So an air intake assembly incorporating a variable geometry inertial separator has been designed and then CFD/structural analysis for the assembly was performed to see its design results. Then 35% scaled model of the air intake assembly was manufactured and wind tunnel test was done. This paper describes the detailed design results for the aerodynamic design, analysis and wind tunnel testing during the development process of the air intake assembly.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.6
• /
• pp.663-668
• /
• 2014

Mechanical and electrical devices in various forms are used in many different fields. These can be exposed to external environmental factors such as shock. Therefore, a shock test machine is commonly used to test these devices and evaluate their shock resistance. In this test, the break-down or permanent deformation and malfunction of inner parts due to a high stress or acceleration can be evaluated. As part of a shock test machine, a velocity generator is needed to create shocks between objects. In this study, a hydraulic velocity generator was conceptually designed and an AMESim model was developed to simulate the velocity under different conditions. Simulation results using this model were compared with the test results from a reduced-size velocity generator, and we designed a velocity generator that fits the target payload and velocity using the simulation results.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.165-165
• /
• 2011

내진 설계규정이 적용되기 이전에 시공되어 사용 중인 교량의 경우 지진 발생시 교각의 파괴 또는 구조적 피해는 교량 전체 시스템의 붕괴를 초래하므로 지진하중에 대하여 피해를 최소화해야 한다. 이를 위해 내진설계규정이 적용되기 이전의 교량 또는 지진취약지역으로 분류된 곳의 교량, 사회적 중요도가 높은 교량에 대해 교각의 내진성능보강을 실시하고 있다. 2007년 말 국토해양부가 관리하고 있는 11,940개 교량 중 지진 발생시 피해가 우려되는 1,342개(일반국도 682개, 고속국도 600개) 교량에 대해 2006년부터 내진보강이 착수되었고 2009년에는 확대 추진하여 일반국도 80개교, 고속국도 100개교에 대한 보강을 실시하였다. 이와 같이 확대 추진되고 있는 정책에 반해, 내진보강 기술 및 제품이 부족하고 새로운 내진보강재 개발이 불가피해지고 있는 것이 현실이다. 소성영역에서의 횡방향 철근은 지진 시 종방향 철근의 좌굴과 콘크리트의 압축강도저하를 방지하며, 전단보강철근으로도 중요한 역할을 하여 교각의 전단강도를 증가시킨다. 그러나 이러한 횡방향 철근은 초기 설계에 의한 시공이 종료된 후 기존의 성능을 증가시키기 위하여 철근량을 증가하거나 단면의 변화를 주기에는 매우 어려운 일이다. 따라서 내진성능을 위한 단면력 증가를 위하여 다양한 재료의 보강재와 형식이 사용되고 있다. 본 연구에서는 원형교각 모델의 구조해석을 이용해 내진성능평가를 선행한 후 실험체를 제작, Helical Bar를 보강하여 준정적 실험을 통해 내진보강성능을 평가하였다. 압축설계강도 $f_{ck}=240kgf/cm^2$를 기준으로 교량등급 2등교인 일반적인 도로교의 1/4축소모형을 설계, 기초부는 $1,200{\times}600{\times}600$ (mm)으로 철근과 콘크리트로 구성하였으며, 기둥부는 직경 400mm, 높이 1,250mm 크기의 철근콘크리트 원형 교각 실험체를 제작하였다. 제작된 실험체는 총 3개로, 분류는 무보강 일반 실험체, Helical Bar 직경에 따른 분류, 보강간격에 따른 분류로 나누어진다.