• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.11
• /
• pp.509-520
• /
• 2015

College Scholastic Ability Test(CSAT) is a primary test to evaluate the study achievement of high-school students and used by most universities for admission decision in South Korea. Because its level of difficulty is a significant issue to both students and universities, the government makes a huge effort to have a consistent difficulty level every year. However, the actual levels of difficulty have significantly fluctuated, which causes many problems with university admission. In this paper, we build two types of data-driven prediction models to predict correct answer rate and to identify significant factors for CSAT English test through accumulated test data of CSAT, unlike traditional methods depending on experts' judgments. Initially, we derive candidate question-specific factors that can influence the correct answer rate, such as the position, EBS-relation, readability, from the annual CSAT practices and CSAT for 10 years. In addition, we drive context-specific factors by employing topic modeling which identify the underlying topics over the text. Then, the correct answer rate is predicted by multiple linear regression and level of difficulty is predicted by classification tree. The experimental results show that 90% of accuracy can be achieved by the level of difficulty (difficult/easy) classification model, whereas the error rate for correct answer rate is below 16%. Points and problem category are found to be critical to predict the correct answer rate. In addition, the correct answer rate is also influenced by some of the topics discovered by topic modeling. Based on our study, it will be possible to predict the range of expected correct answer rate for both question-level and entire test-level, which will help CSAT examiners to control the level of difficulties.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7635-7647
• /
• 2015

The purpose of this study is modeling nursing competencies and reasoning out the core competencies, the ability for 20% of important actions for nursing jobs which can manage the rest 80% so that the competency-based nursing curriculum can be developed. A literature review of the vast studies regarding competencies was done to understand the concepts of competency-based curriculum, competency, and nursing competencies, identifying the relationships among each nursing competency categorized in accordance with those concepts. An exemplified concept map of core competencies for the competency-based nursing curriculum is suggested based on a thorough review of various competency modeling methodologies. The core competencies consist of base competency (theoretical/practical nursing knowledge and skills), practical competency (clinical judgment, patient education, communication, etc.), and personality competency (leadership, sense of responsibility, cooperation, etc.). The circular relationship among them can remain consistent through self-directed learning and critical thinking. Therefore, a nurse who have those core competencies is a knowledge worker, a self-directed learner, and also an effective, professional communicator. Further studies which solidify the concept of nursing competencies should be done, as well as the feedback procedures which evaluate the program outcomes and then reflect the evaluation results in the curriculum should be followed continuously.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.27 no.3
• /
• pp.127-143
• /
• 2022

Recently, many attempts to run numerical ocean models in cloud computing environments have been tried actively. A cloud computing environment can be an effective means to implement numerical ocean models requiring a large-scale resource or quickly preparing modeling environment for global or large-scale grids. Many commercial and private cloud computing systems provide technologies such as virtualization, high-performance CPUs and instances, ether-net based high-performance-networking, and remote direct memory access for High Performance Computing (HPC). These new features facilitate ocean modeling experimentation on commercial cloud computing systems. Many scientists and engineers expect cloud computing to become mainstream in the near future. Analysis of the performance and features of commercial cloud services for numerical modeling is essential in order to select appropriate systems as this can help to minimize execution time and the amount of resources utilized. The effect of cache memory is large in the processing structure of the ocean numerical model, which processes input/output of data in a multidimensional array structure, and the speed of the network is important due to the communication characteristics through which a large amount of data moves. In this study, the performance of the Regional Ocean Modeling System (ROMS), the High Performance Linpack (HPL) benchmarking software package, and STREAM, the memory benchmark were evaluated and compared on commercial cloud systems to provide information for the transition of other ocean models into cloud computing. Through analysis of actual performance data and configuration settings obtained from virtualization-based commercial clouds, we evaluated the efficiency of the computer resources for the various model grid sizes in the virtualization-based cloud systems. We found that cache hierarchy and capacity are crucial in the performance of ROMS using huge memory. The memory latency time is also important in the performance. Increasing the number of cores to reduce the running time for numerical modeling is more effective with large grid sizes than with small grid sizes. Our analysis results will be helpful as a reference for constructing the best computing system in the cloud to minimize time and cost for numerical ocean modeling.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.90-90
• /
• 2017

생력화를 위한 구기자의 수확 기계화는 열악한 수확작업환경을 쾌적한 작업환경으로 개선하고 노동력 감소, 생산비 절감을 할 수 있다. 관행 손 수확과 진동 고리형 수확기 방법보다 높은 작업 능률 향상으로 영농규모의 확대 촉진 및 안정적인 영농 구조를 구축하여 재배농가의 생산비를 절감하여 경쟁력을 높일 수 있으며, 기존 인력에 의존하였던 수확작업을 기계화함으로서 전업농 및 대단위 경작이 가능하게 함으로서 국내에서 생산한 양질의 구기자를 국민에게 안정적으로 제공할 수 있다. 따라서, 본 연구는 구기자 수확작업의 생력화를 위하여 개발 보급된 수목형의 재배법 특성을 분석하고 이를 토대로 타격장치를 적용한 보행형 구기자 수확기를 개발하는데 목적이 있다. 수목형 구기자나무의 분지에 착과되어 있는 숙과를 주행하면서 탈과 할 수 있는 탈과 장치를 제작하기 위하여 타격형 탈과 장치를 3D 모델링 작업(Inventor V.11, Autodesk, USA) 후 시작기를 제작, 구기자 수확 시작기는 주행부, 타격장치, 집과부, 분지유인부로 구성하였다. 구기자 수확 시작기의 최대 높이는 형태학적 특성을 토대로 타격봉의 높이를 900 mm 이하로 제한하였으며, 조향장치의 높이는 800 mm로 하였다. 주행부는 구기자 재식 조사결과를 이용하여 고랑 폭 1,500 mm 이하에서 자유롭게 전 후진 이동이 가능하고 경사로 등을 주행 시에도 안전성을 높이기 위해 자동브레이크 기능이 있으며 타격장치의 타격 봉은 알루미늄 재질로 지름 100 mm, 길이 400 mm로 설계 제작하였으며, 구기자 분지 타격 시 분지와 타격 봉이 수직 상태로 타격이 가능하도록 제작, 집과장치는 포장의 두둑, 고랑은 일괄 표준화가 되어 있지않아 청양구기자시험장에서 측정한 재배법을 바탕으로 설계된 수집부 프레임의 적용범위는 폭 450 mm, 길이 720 mm, 높이 1,500 mm를 집과 범위로 하여 설계 제작하였다. 타격 방식을 적용한 구기자 수확기 성능평가 결과 조숙기에 30초 이상의 탈과 시 87.5 % 이상 탈과는 어려울 것으로 판단되었으며, 성숙기에는 타격시간에 관계없이 92 %의 매우 우수한 탈과율이 나타났다. 성숙기의 주행속도 48 m/h 일 때 탈과율과 집과율은 89 %, 92 %로 나타났다.단위작업시간당 최대 수확 능력은 관행작업 2.9 kg/hr, 진동고리형 수확기 5.2 kg/hr, 타격방식을 적용한 구기자 수확기는 최소 7.6 kg/hr, 최대 24.1 kg/hr로 관행작업과 비교하여 주행속도와 시기별 최소 2.6배, 최대 8.3배의 작업 성능 차이가 나타났다. 재배양식에서는 기계화 수목형이 적합한 것으로 나타났고, 타격방식을 적용한 보행형 구기자 수확기를 이용하여 수형별 시간대별 수확성능을 시험한 결과 우수한 결과가 나타났다. 이에 따라 구기자 재배 농가에 기계화수목형 재배법을 보급하고 타격방식을 적용한 구기자 수확기를 이용하면 작업환경 개선과 노동력, 인건비 절감을 통한 영농규모의 확대 촉진 및 안정적인 영농 구조로 구기자 경쟁력 제고를 할 수 있을 것으로 판단되어진다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.2
• /
• pp.114-121
• /
• 2001

A circuit model for active-controlled field emitter array(ACFEA) as an electron source of active-controlled field emission display(ACFED) has been proposed. The ACFEA with hydrogenated amorphous silicon thin-film transistor(a-Si:H TFT) and Spindt-type molibdenum tips (Spindt-Mo FEA) has been fabricated monolithically on the same glass. A-Si:H TFT is used as a control device of field emitters, resulting in stabilizing emission current and lowering driving voltage. The basic model parameters extracted from the electrical characteristics of the fabricated a-Si:H TFT and Spindt-Mo FEA were implemented into the ACFEA model with a circuit simulator SPICE. The accuracy of the equivalent circuit model was verified by comparing the simulated results with the measured one through DC analysis of the ACFEA. The transient analysis of the ACFEA showed that the gate capacitance of FEA along with the drivability of TFT strongly affected the response time. With the fabricated ACFEA, we obtained a response time of 15$mutextrm{s}$, which was enough to make 4bit/color gray scale with the pulse width modulation (PWM).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.461-467
• /
• 2003

This paper proposes the method of mobility implementation for location searching in the intelligence wireless ATM networks that expand and apply standard broadband signaling capabilities, and analyze the performance based on the numerical algorithm. The existing B-ISDN UNI protocol stack demands the location search mechanism to determine the location of mobile terminal in the wireless ATM networks because it use single protocol through the fixed PTP interface or PTM interface that don't support terminal mobility. The proposed method make possible the dynamic mobility at a part of wireless access by minimizing the signaling load without a falling-off in system performance by using the intelligence network technology according to the expansion of ATM and B-ISDN signaling integration based on the fixed networks. We implemented the performance analysis by MFC modeling based on numerical algorithm, and realized the efficiency of expenses by carrying out the comparative signaling performance evaluation to measure the relative gains of location search service in the intelligence wireless ATM system. The obtained results have the flexibility to operate in the public B-ISDN network environment without a change of existing B-ISDN/ATM NNI signaling reference to support the wireless ATM access system, and can easily expand to correspond to terminal mobility and various multimedia services in the next broadband PCS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.1
• /
• pp.57-68
• /
• 1993

In this paper, we describe a multiprocessor system using the HiPi bus with pended protocol and multiple cache memories, and evalute the performance of the multiprocessor system in terms of processor utilization for various cache coherence protocols. The HiPi bus is delveloped as the shared bus of TICOM II which is a main computer system to establish a nation-wide computing network in ETRI. The HiPi bus has high data transfer rate, but it doesn't allow cache-to-cache transfer. In order to evaluate the effect of cache-to-cache transfer upon the performance of system and to choose a best-performed protocol for HiPi bus, we simulate as follows: First, we analyze the performance of multiprocessor system with HiPi bus in terms of processor utilizatIOn through simulation. Each of cache coherence protocol is described by state transition diagram, and then the probability of each state is calculated by Markov steady state. The calculated probability of each state is used as input parameters of simulation, and modeling and simulation are implemented and performed by using SLAM II graphic symbols and language. Second, we propose the HiPi bus which supports cache-to-cache transfer, and analyze the performance of multiprocessor system with proposed HiPi bus in terms of processor utilization through simulation. Considered cache coherence protocols for the simulation are Write-through, Write-once, Berkely, Synapse, Illinois, Firefly, and Dragon.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.185-185
• /
• 2010

문명 발전에 의해 생활공간이 더욱더 복잡해짐에 따라 현실 세계의 3차원 공간으로서의 이해가 필요해졌고, 3차원 공간을 효율적으로 관리 및 분석하기 위하여 3차원 GIS에 대한 중요성이 대두되기 시작하였다. 현재까지의 3차원 GIS는 1990년대에 들어서 3차원 가상도시의 등장으로 도시 모델의 3차원 가시화에 대해 많은 연구가 진행되어 왔다. 이러한 3차원 가상도시는 도시 관리 차원에서 도시공간의 표현, 분석, 모델링, 시뮬레이션 등을 통하여 도시정보의 체계적이고 효율적인 관리를 가능하게 한다. 3D GIS 기술의 활용 사례로는 3차원 도시 경관 분석 및 도시 계획, 3차원 시뮬레이션, 3차원 위치기반 서비스, 도시 행정 관리 등이 있다. 3차원 도시 경관 분석 및 도시 계획 활용 분야에서는 3차원 GIS를 활용하여 새롭게 건설되는 건물들이나 토지 이용 변경에 따른 경관 분석을 가상공간에서 시뮬레이션 분석함으로써 경관 변화 예측 및 적합한 경관 설계에 대한 분석을 한다. 3차원 시뮬레이션의 경우 환경오염도 분석, 최적의 입지선정, 개발 전후의 경관 차이, 각종 재난에 따른 위험도 분석, 경관과 일조량 분석 등을 미리 가상도시에 시뮬레이션 함으로서 불필요한 업무를 줄일 수 있고 발생할 수 있는 결과 값을 예상할 수 있다. 3차원 위치기반 서비스의 경우 자신의 위치를 비교적 정확히 측정함으로서 생소한 도시를 방문하거나 위치를 찾아갈 경우 최단 경로 및 최적 경로를 탐색할 수 있다. 앞으로의 3차원 GIS 기술 동향으로 유비쿼터스 환경에서의 시공간분석(Temporal GIS)과 3차원 실내공간인지 기술 개발 등으로 볼수있다. 시공간분석은 시공간 질의를 통한 공간정보의 시간에 다른 변화 계산 또는 예측된 결과를 분석할 수 있고, 시공간 분석에 사용되는 공간적, 시간적 정보의 조합은 적어도 3차원 이상의 정보를 나타내기 때문에 필요에 따라 다양한 결과를 산출 할 수 있다. 종합적으로 시공간분석은 GIS의 분석 범위를 넓혀 주며 실시간 GIS 응용시스템 개발을 위한 주요 과업이다. 3차원 실내공간정보 표현기법과 공간분석 및 공간인지 기법을 이용한 통한 유비쿼터스 환경에서의 3차원 실내공간인지 기술 개발을 통해 최근 공간정보를 기반으로 한 위치기반서비스내 u-서비스 즉, 인간 행태의 분석, 관리 및 응용을 지원하도록 한다 이는 위치기반서비스 사용자의 주변상황에 대한 인지능력을 향상시켜주고 최근 사회적 이슈가 되고 있는 U-City의 성공여부에 직접적인 영향을 미칠것이다. 이를 위해 다음과 같은 기술개발이 수행되어야 할것이다. 첫째로, 공간인지 기술을 위한 3차원 실내공간표현 방법 개발, 둘째로, 3차원 실내공간정보를 이용한 공간분석 및 공간인지 기법 개발, 마지막으로 유비쿼터스 환경에서 3차원 실내공간인지를 위한 미들웨어 개발을 통해서 공간정보의 활용을 macro-scale 공간에서 micro-scale로 확산될 것이다. 그러므로, 본 세미나를 통해서, 3차원 GIS의 활용의 보편화와 대중화를 위해서는 3차원 데이터 획득 및 처리 방법, 3차원 공간데이타베이스, 공간 분석 및 가시화에 대한 기술적 이슈들을 논하고자 한다.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.4
• /
• pp.101-113
• /
• 2012

The degradation of a tunnel drainage system leads to increases in pore water pressure around the tunnel and the lining stress, which results in affecting the tunnel stability. In the present study of the Namsan 3th tunnel, more than 30 year old tunnel, the effects of the drainage performance reduction due to drain hole clogging on the tunnel lining stability were investigated by examining pore water pressure distribution around the tunnel and the lining stresses through numerical analysis. Groundwater flow modeling on the Mt. Namsan region was done first and 3D seepage and coupled stress-pore water pressure finite element analysis were performed on the tunnel using the results of the groundwater flow modeling. The pore water pressure distribution and the tunnel lining stresses could be predicted using a drain hole outflow data measured in the tunnel site. This analysis method may be used to evaluate the current stability of old tunnels for which in most cases field investigations and related information are not readily available.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.29-33
• /
• 2007

All pixels of image sensor do not react uniformly even if the light of same radiance enters into the camera. This non-uniformity comes from the sensor pixel non-uniformity and non-uniformity induced by the changing transmission of the telescope over the field. The first contribution to the non-uniformity has high spatial frequency nature and has an influence on the result and quality of the data compression. The second source of non-uniformity has low frequency nature and has no influence of the compression result. As the contribution resulting from the sensor PRNU(Photo Response Non-Uniformity) is corrected inside the camera electronics, the effect of the remaining non-uniformity to the compression result will be negligible. The non-uniformity correction result shall have big difference according to the sensor modeling and the calculation method to get correction coefficient. Usually, the sensor can be modeled with one dimensional coefficients which are a gain and a offset for each pixel. Only two measurements are necessary theoretically to get coefficients. However, these are not the optimized value over the whole illumination level. This paper proposes the algorithm to calculate the optimized non-uniformity correction coefficients over whole illumination radiance. The proposed algorithm uses several measurements and the least square method to get the optimum coefficients. The proposed algorithm is verified using the own camera electronics including sensor, electrical test equipment and optical test equipment such as the integrating sphere.