• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.589-591
• /
• 2023

현재 수치예보 시스템은 항공기, 위성 등 다양한 센서에서 얻은 다종 관측 데이터를 동화하여 대기 상태를 추정하고 있지만, 관측변수 또는 물리량이 서로 다른 관측들을 처리하기 위한 계산 복잡도가 매우 높다. 본 연구에서 기존 시스템의 계산 효율성을 개선하여 관측을 평가하거나 전처리하는 데에 효율적으로 활용하기 위해, 각 관측의 특성을 고려한 자기 지도학습 방법을 통해 멀티모달 기상관측으로부터 실제 대기 상태를 추정하는 방법론을 제안하고자 한다. 비균질적으로 수집되는 멀티모달 기상관측 데이터를 융합하기 위해, (i) 기상관측의 heterogeneous network를 구축하여 개별 관측의 위상정보를 표현하고, (ii) pretext task 기반의 self-supervised learning을 바탕으로 개별 관측의 특성을 표현한다. (iii) Graph neural network 기반의 예측 모델을 통해 실제에 가까운 대기 상태를 추정한다. 제안하는 모델은 대규모 수치 시뮬레이션 시스템으로 수행되는 기존 기술의 한계점을 개선함으로써, 이상 관측 탐지, 관측의 편차 보정, 관측영향 평가 등 관측 전처리 기술로 활용할 수 있다.

• Journal of Intelligence and Information Systems
• /
• v.20 no.1
• /
• pp.1-14
• /
• 2014

Both researchers and practitioners are showing an increased interested in interactive exhibition services. Interactive exhibition services are designed to directly respond to visitor responses in real time, so as to fully engage visitors' interest and enhance their satisfaction. In order to install an effective interactive exhibition service, it is essential to adopt intelligent technologies that enable accurate estimation of a visitor's emotional state from responses to exhibited stimulus. Studies undertaken so far have attempted to estimate the human emotional state, most of them doing so by gauging either facial expressions or audio responses. However, the most recent research suggests that, a multimodal approach that uses people's multiple responses simultaneously may lead to better estimation. Given this context, we propose a new multimodal emotional state estimation model that uses various responses including facial expressions, gestures, and movements measured by the Microsoft Kinect Sensor. In order to effectively handle a large amount of sensory data, we propose to use stratified sampling-based MRA (multiple regression analysis) as our estimation method. To validate the usefulness of the proposed model, we collected 602,599 responses and emotional state data with 274 variables from 15 people. When we applied our model to the data set, we found that our model estimated the levels of valence and arousal in the 10~15% error range. Since our proposed model is simple and stable, we expect that it will be applied not only in intelligent exhibition services, but also in other areas such as e-learning and personalized advertising.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.11
• /
• pp.1314-1319
• /
• 2009

The design methods of mechanical systems are largely classified into deterministic methods and stochastic methods. In deterministic methods, design parameters are assumed to have fixed values. On the other hand, in stochastic methods, design parameters are assumed to be statistically distributed. When a stochastic method is employed, statistical characteristics of the populations of design variables are assumed to be known. However, very often, it is almost impossible or very expensive to obtain the statistical characteristics of the populations. Therefore a sample survey method is usually employed for stochastic methods. This paper describes the procedure of estimating the statistical characteristics of populations by employing sample data sets. An example of AFM micro cantilever beam is employed to show the effectiveness of the procedure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.883-889
• /
• 2013

The distribution of a response usually depends on the distribution of a variable. When the distribution of a variable has two different modes, the response also follows a distribution with two different modes. In most reliability analysis methods, the number of modes is irrelevant, but not the type of distribution. However, in actual problems, because information is often provided with two or more modes, it is important to estimate the distributions with two or more modes. Recently, some reliability analysis methods have been suggested for bimodal distributions. In this paper, we review some methods such as the Akaike information criterion (AIC) and maximum entropy principle (MEP) and compare them with the Monte Carlo simulation (MCS) using mathematical examples with two different modes.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.1
• /
• pp.37-44
• /
• 2018

To understand the dynamic characteristics of the vessel with hydroelastic response, it is very important to estimate the dynamic modal parameters such as mode shapes, natural frequency, and damping ratio. These dynamic modal parameters of full scale ship are a priori unknowns, hence to be estimated directly based upon the full scale measurement data. In this paper, dynamic modal parameters were extracted by signal processing of acceleration and strain data measured from a large container ship whose loading capacity is 9400TEU. The mode shapes of the vibrating hull were identified using the proper orthogonal decomposition and the vibration response of hull was decomposed into its modal magnitudes. Natural frequencies of specific modes were derived via Fourier transform of these modal magnitude. Also, the free decay signal of the vibrating hull was obtained through the random decrement technique and the damping ratio was estimated with accuracy.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.1
• /
• pp.41-50
• /
• 2003

Nondestructive Damage Evaluation (NDE) techniques yield the damage location and its size from the modal characteristics of pre-damaged and post-damaged structures. To predict the system reliability of the aging structure, results from the NDE are integrated into the element/component failure probabilities. The element/component failure probabilities can be calculated from failure functions for each element/component with the aid of techniques from a structural reliability analysis. In this paper, a method to estimate the system reliability of a structure that is based on the reliabilities of elements/components in a given structure is presented. The efficacy of the combination of the nondestructive damage detection and the structural reliability evaluation is demonstrated using pre-damaged and post-damaged modal data obtained from numerical simulations of a rigid frame.