• Digital Contents
• /
• no.8 s.99
• /
• pp.80-85
• /
• 2001

우리나라에서도 정보 보안에 관한 인식이 이젠 과거와는 달리 많이 높아지고 있는 실정이며, 그래서 과거의 시스템 구축만으로 보안을 끝이라고 아는 인식보다는 보안의 사후 지속적인 관리가 더 중요하다고 인식하는 사례가 증가하고 있는 실정이다. 이에따라 구축해 놓은 보안 시스템을 24시간 감시해주고 모니터링 해주는 관제서비스 분야가 서서히 두각을 나타내고 있다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.593-599
• /
• 2022

In this study, a crack monitoring system capable of detecting cracks based on image processing techniques was developed to effectively check cracks, which are the main damage of concrete structures, and a program capable of imaging and analyzing cracks was developed using machine vision. This system provides objective and quantitative data by replacing the appearance inspection that checks cracks with the naked eye. The verification of the development system was applied to the construction site of a self-healing concrete water tank to monitor the crack and the amount of change in the crack width according to age. In the case of crack width detected by image analysis, the difference from the measured value using a digital microscope was up to 0.036 mm, and the crack healing effect of self-healing concrete could be confirmed through the reduction of crack width.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.10
• /
• pp.81-89
• /
• 2009

Recently, Guard lamp was divided from electric facilities for general use as dangerous zone of safety management. This paper presents a remote inspection system of guard lamp that can monitor electrical safety factor. Especially, the developed system adopts the measurement algorithm for detecting resistive leakage current($I_{gr}$) flowing based on the phase difference checkable for sensing at a monitor. Also, It was fabricated the repeater for data transmission and the MMI program At this system, we made experiment on stability of resistive leakage current to verify phase comparison detecting algorism.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.5
• /
• pp.638-644
• /
• 2010

This paper presents ideas of service scenarios for home residents using electric power monitoring system per appliance, the implementation of the monitoring system, and analysis of acquired electric power usage pattern. By acquiring and analyzing electric power usage pattern, home residents can get information of power usage pattern of every legacy (non-Demand Response-ready) appliance. Further they can get pieces of recommendation how to reduce energy consumption, intelligent standby power blocking service, and alarming service to abnormality of appliances. In order to check the feasibility of the ideas, a system that can acquire electric power pattern per appliance is implemented, and electric power pattern of some appliances are stored to a database and it was analyzed to show if auto-identification of a type of a device is possible, which is a basic required function for the scenarios presented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1303-1310
• /
• 2010

Recently, researches related with automative mechanism have been widely studied to increase the driver's safety by continuously monitoring the driver's health condition to prevent driver's drowsiness. This paper describes the design of wearable chest belt for ECG and reflectance pulse oximetry for SpO2 sensors based on wireless sensor network to monitor the driver's healthcare status. ECG, SpO2 and heart rate signals can be transmitted via wireless sensor node to base station connected to the server. Intelligent monitoring system is designed at the server to analyze the SpO2 and ECG signals. HRV (Heart Rate Variability) signals can be obtained by processing the ECG and PPG signals. HRV signals are further analyzed based on time and frequency domain to determine the driver's drowsiness status.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.545-548
• /
• 2009

Recently, researches related to automative mechanism have been widely studied to increase the driver's safety by continuously monitoring the driver's health condition to prevent driver's drowsiness. This paper describes the design of wearable chest belt for ECG and reflectance pulse oximetry for $SpO_2$ sensors based on wireless sensor network to monitor the driver's healthcare status. ECG, $SpO_2$ and heart rate signals can be transmitted via wireless sensor node to base station connected to the server. Intelligent monitoring system is designed at the server to analyze the $SpO_2$ and ECG signals. HRV(Heart Rate Variability) signals can be obtained by processing the ECG and PPG signals. HRV signals are further analyzed based on time and frequency domain to determine the driver's drowsiness status.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2853-2858
• /
• 2013

This paper proposes the ITMS(Intelligent Transport Monitoring System) which manages the route and state of freight by using the Meteorological Office, the Transportation Management Center, GPS and Sensors, etc. The ITMS consists of the CIMS(Container Inner Monitoring System) transmitting the inner temperature and humidity of a container, the TMM(Transport Management Module) computing an estimated time of arrival with Freight Vehicle location information and transmits the result to the CIMS, the FMM(Freight Management Module) checking and managing the freight freshness by using the temperature and humidity of the collected containers, and the SMM(Stevedoring Management Module) selecting the container loading and unloading places with the information transmitted from the CIMS, the TMM, and the FMM and attaching the freight formation to containers using an RFID label. The ITMS not only checks the freight condition at intervals but also acquires and manages the freight information with RFID labels rapidly and accurately.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.997-1001
• /
• 1999

국내 제조업체의 기술발달로 인해 각 산업계의 모듈 및 시스템에 대한 차체 개발과 더불어 이전 외국업체에 의해 설계된 시스템들에 대한 국산화가 많이 이루어지고 있다. 신뢰성평가에 있어서도 예전부터 수행하고 있는 부품단위의 시험평가와 더불어 최근에는 모듈 류에 대한 시험평가요구가 증가하고 있으며 특히, 이들 개발 모듈류에 대한 신뢰성확보를 위해 가속수명시험(ALT)과 초기고장을 가려내기 위한 번인(Burn-In)시험이 많이 행해지고 있다. 이들 시험을 위해서는 장시간에 걸쳐 그 모듈류의 기능을 점검하고 모니터링 할 수 있는 측정자동화 시스템이 필수적이다. 본 연구에서는 이런 측정 자동화시스템 제작에 관련된 내용을 기술하고 실제 적용 사례를 제시하여 모듈류의 가속수명시 기능점검에 대해 논하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.1105-1106
• /
• 2019

고도성장 당시 건축되었던 사회기반시설들은 노후화로 인한 안전사고의 위험성이 부각되고 있다. 사회기반시설 중 교량의 경우 건축방식, 기후에 따른 안전점검 간 제약사항이 생긴다. 본 논문에서는 드론을 통해 점검이 필요한 교량을 촬영한다. 교량의 촬영 데이터를 정합 이미지로 생성하여 교량 내 유지보수를 위한 교량 모니터링 시스템을 제안한다.

• Korean Journal of Cognitive Science
• /
• v.26 no.1
• /
• pp.53-67
• /
• 2015

Metacognitive monitoring refers to high dimensional cognitive activities. Understanding one's own cognitive processes accurately can make effective controls for their performance. Brain area related with metacognition is PFC which is completed the order of late and it can be inferred that monitoring abilities is developing during late adolescent. In this study, we explored the developmental difference in monitoring accuracy between high school students and college students using by measuring JOL(Judgment of Learning). Participants was asked that they study Spanish-Korean word pairs and judge their future performance of memory. In the result, people in both groups thought that they could remember word pairs better than their actual performance. Absolute bias scores which mean the degree to predict their performance apart from true scores showed the interaction between subject groups and task difficulty. Specifically, people judged their learning state quite accurately in easy task condition. However, in difficult task condition, both groups showed inaccuracy for predicting their learning and the magnitude of the degree was bigger in the group of high school students.