• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.11a
• /
• pp.29-29
• /
• 2001

열전재료는 열전현상을 가지고 있어 열전발전과 열선냉각이 가능하기 때분에 해저용, 우주용, 군사용의 특수 전원으로 이미 실용화되어있고, 반도체, 레이저 다이오드, 적외선 검출소자 등의 냉각기로 쓰여지고 있어 많은 연구자들이 이들 재료에 대한 연구에 관을 갖고 열전특성을 향상시키기 위하여 많은 연구를 진행하고 있다 이들 열전재료는 사용 온도구역에 따라 3종류로 구분하고 있으며, 실온부근의 저온 영역(20$0^{\circ}C$)이하에서는 $Bi_2Te_3$계 재료, 중온영역(20$0^{\circ}C$~50$0^{\circ}C$)에서sms (Pb,Ge) Te계 재료, 고온영역(50$0^{\circ}C$~lOoo$^{\circ}C$)에서는 Si-Ge계 Fe Si계 재료가 이용되고 있다. 본 연구에서는 실온에서 성능지수가 높은 Bi_2(Te,Se)_3$에 대한 연구를 진행하였다. Bi_2(Te,Se)_3$계 열전재료는 기존의 공법인 Zone melting법을 이용하는 경우 성능지수가 높으나, 단위정이 Rhombohedral 구조파 기저면(basal plane)에 벽개성이 있는 관계로 재료의 적지 않은 손실과 가공상의 어려움이 있다. 또한 사료전체에 걸쳐 화학적으로 균질한 고용체를 얻는 것도 어려운 문제점으보 부각되고 있디 따라서 이와같은 문제점을 보완하기 위하여 용질원자의 편석감소, 고용도의 증가, 균일 고용체 형성, 결정립의 미세화등의 장점이 있는 급속응고법을 본 연구에 응용하였다. 본 연구에서는 위에서와 같은 급속응고의 장점과 대량 가공이 능늪한 연간압출공정을 이용하여 제조된 분말을 성형화 하였다. 특히 열간압출 가공에 있어서 압축다이 각 변화는 재료의 소성유동에 매우 중요한 역하을 하게되며, 이와 갇은 소성유동은 본 재료의 열전특성에 중요한 영향을 미치는 C 면 배양에 중요한 역할을 한 것으 로 기대된다. 이에 본 연구에서는 압출다이 각도 변화에 따른 미세조직변화와 이들 조직이 강도와 열전특성에 미치는 영향을 석하고자 한다. 압출재의 미세조직은 XRD(X Ray Diffraction), SEM(Scanning Electron Microscopy)으로 분석하였으며, 열전특성인 Seebeck계수($\alpha$)와 전기비저항( $\rho$ )은 열전측정장치로, 기계적 강도는 MTS장비를 이용하여 이루어졌다. 또한 압축다이각도 변화에 따른 결정방위 해석은 모노크로미터가 장착된 X RD장비감 이용하여 분석되었다.

• Korean Journal of Food Science and Technology
• /
• v.18 no.2
• /
• pp.153-157
• /
• 1986

Changes in lipid components of Gae-bul, Urechis unicinctus, during hot-air drying ($40^{\circ}C$, 7 hrs) were studied. Raw sample contained 1.3% total lipid (TL) which consisted of 35.1% neutral lipid (NL), 18.0% glycolipid (GL) and 46.9% phospholipid (PL), and dried sample contained 5.3% TL which consisted of 51.8% NL, 20.5%GL and 27.7% PL. There were about 40% decrease in PL content and a slight increase in NL content during drying. The NL of raw sample mainly consists of triglyceride (TG, 39.8%), free sterol (FS, 39.6%), free fatty acid (FFA, 12.2%). and also identified diglyceride (DG), monoglyceride and esterified sterol and hydrocarbon in less quantify. The percent of TG and FS decreased, while that of FFA and DG increased during drying. And main components in the PL were phosphatidyl choline (PC,45.6%), phosphatidyl ethanolamine (PE,34.8%), and followed by phosphatidyl serine (PS) and an unknown substance. In the components of PL, PE, PS and PC decreased slightly in order during drying. And major fatty acids of raw and dried samples were generally 16:0, 18: 1, 18:3, and 20:5. The content of the polyenoic acid such as 20:5 decreased. while the saturated acid increased slightly during drying.

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.273-282
• /
• 2008

The relationship between water deficit stress and monodehydroascorbate reductase (MDHAR) activity was determined in lettuce (Lactuca sativa L.) leaves under water stress condition imposed by with-holding water for 72 hrs. Relative water content determined in water deficit stressed lettuce leaves gradually reduced from 91.29% to 74.58%, and water content of medium drastically decreased 4.73% after quitting of irrigation. Hydrogen peroxide content in leaves subjected to water deficit stress rapidly increased, but soluble protein content rapidly decreased when those were compared to control plant. The relationship between relative water content and hydrogen peroxide content in stressed leaves positively correlated with $R^2$=0.8851, but soluble protein content reversely correlated with $R^2$=0.9826. Total chlorophyll content in stressed plant leaves was higher than that of control plant, and increased rapidly in early stage of treatment of both stressed and control plants. Carotenoid content was higher than that of control plant, and the ratio of carotenoid to total chlorophyll in stressed plant was higher as compared to control plant. As water deficit stress continued progressively, total ascorbate content in stressed plant leaves was a little higher than that of control plant. But dehydroascorbate (DHA) content within 6 hr of water deficit stress was higher than that of control plant, and then, content of control plant in 12 hr of stress treatment higher than that of stressed leaves. The activity of monodehydroascorbate reductase of cytosolic and chloroplastic tractions increased dramatically, and mRNA of MDHAR was highly detected by probing $^{32}P$-labeled single stranded MDHAR RNA of lettuce plant leaves subjected to water deficit stress. Relationship between MDHAR activity and relative water content and hydrogen peroxide highly correlated with $R^2$=0.9937 and 0.8645, respectively.

• Journal of Korea Multimedia Society
• /
• v.13 no.11
• /
• pp.1715-1727
• /
• 2010

Although a hand haptic interaction which provides direct and natural sensation is the most natural way of interacting with VR environment, the hand haptic interaction has still limitations with respect to the complexity of articulated hand and related hardware capabilities. Particularly, virtual assembly simulation which refers to the verification process of digital mockup in product development lifecycle is one of the most challenging topics in virtual reality applications. However, hand haptic interaction is considered as a big obstacle, because difficulty initial grasping and non-dextrous manipulation remain as unsolved problems. In this paper, we propose that common hand haptic interactions involves two separate stages with different aspects. We present the hand haptic interaction method enables us to stably grasp a virtual object at initial grasping and delicately manipulate an object at task operating by one's intention. Therefore, proposed method provides the robustness using grasping quality and dextrous manipulation using physically simulation. We conducted experiments to evaluate the effectiveness of our proposed method under different display environments -monoscopic and stereoscopic. From 2-way ANOVA test, we show that the proposed method satisfies two aspects of hand haptic interaction. Finally, we demonstrated an actual application of various assembly simulation for relatively complex models.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3140-3145
• /
• 2012

In this paper, a design method for a compact slot antenna fed by a coplanar waveguide (CPW) is studied. A T-shaped tuning stub is inserted inside a narrow rectangular slot and the slot is impedance matched to the CPW feedline by adjusting the width, length, and position of the stub. The resonance frequency is adjustable by the slot length and the antenna size can be reduced by bending the slot. The resonance frequency and impedance matching property of the compact slot antenna are similar to those of the half-wavelength slot antenna, which enables one to design compact antenna of this type with ease. A compact slot antenna for 2.45-GHz ISM band is designed, fabricated on an FR4 substrate (dielectric constant of 4.4 and thickness of 0.8 mm), and experimentally tested. The measured results agree well with the simulations, which confirms the validity of this study. The fabricated compact slot antenna shows an impedance bandwidth of 200 MHz(2.32-2.52 GHz) for a VSWR < 2, which is suitable for 2.45-GHz ISM band (2.4-2.48 GHz). The measured radiation patterns show ${\infty}$-shaped directional pattern in the E-plane and nearly omni-directional pattern in the H-plane with a peak gain of 2.0 dBi, which are similar to those of a monopole antenna. The proposed antenna is expected to be suitable for the applications as antennas for WLAN, RFID, and mobile handset.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.2
• /
• pp.103-110
• /
• 2005

Providing adequate amount of spatial impression for spaciousness) has been known to be one of the most important design considerations for the good acoustics of rooms for music. and the measurement, of room acoustics using parameters. such as LEF and IACC, forms an essential part of such evaluation. However. it is unavoidable to use different transducers (figure of eight microphones. head and torso) for the measurement of each parameter and it tends to make the measurement procedure complicated. The Present work tried to provide a simpler way to measure these binaural room acoustic parameters including monaural ones with a single measurement system using both spatial information collected through a 5-channel microphone and a trained neural network. A computer simulation program, CATT-Acoustic V7.2. which allowed us to obtain exactly the same spatial information as a 5-channel microphone was used. since it requires quite a large amount of data for practical training of a neural network. Since each reflection has different energy. delay and direction, energy should be integrated properly. the concept of ray tracing method was applied inversely in this work. Also applying weightings according to the delay times was considered in this work. Finally, predicted results were compared with the measured data md their correlations were analyzed and discussed.

• Microbiology and Biotechnology Letters
• /
• v.16 no.3
• /
• pp.250-258
• /
• 1988

Lipases are well known as the enzymes which catalyze the hydrolysis of ester bonds combining aliphatic chains and glycerol on mono-, di- and triglycerides. Their reactions are characterized by be-ing heterogeneous and catalyzing the water-insoluble substrates. This property has been one of the Hurdles which delayed the application of lipases in fats and oils industry, However, with the development of biological reaction system of which organic solvent is introduced in part or whole as the reaction media, enzymatic manipulation of fats and oils is attracting increasing attention from the academic and industrial sectors. Trials in two-phase system and reversed micellar system to produce fatty acids through enzymatic hydrolysis of triglycerides preyed to be efficient in respect to volumetric productivity, fat hydrolysis rate, product separation, etc. In organic solvent system lipases have been found to have the ability to catalyze aminolysis, transesterification, esterification, thiotransesterification and oximolysis that are virtually impossible to catalyze in water. The organic solvent system is being extensively used in interesterifying glycerides to produce a fat with the modified physical and chemical nature.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.1
• /
• pp.97-104
• /
• 2013

Methyl alcohol is one of the basic intermediates in the chemical industry and is also being used as a fuel additive and as a clean burning fuel. In this study, conversion of carbon dioxide to methyl alcohol was investigated using catalytic chemical methods. Ceramic monoliths (M) with $400cell/in^2$ were used as catalyst supports. Monolith-supported CuO-ZnO catalysts were prepared by wash-coat method. The prepared catalysts were characterized by using ICP analysis, TEM images and XRD patterns. The catalytic activity for carbon dioxide hydrogenation to methyl alcohol was investigated using a flow-type reactor under various reaction temperature, pressure and contact time. In the preparation of monolith-supported CuO-ZnO catalysts by wash-coat method, proper concentration of precursors solution was 25.7% (w/v). The mixed crystal of CuO and ZnO was well supported on monolith. And it was known that more CuO component may be supported than ZnO component. Conversion of carbon dioxide was increased with increasing reaction temperature, but methyl alcohol selectivity was decreased. Optimum reaction temperature was about $250^{\circ}C$ under 20 atm because of the reverse water gas shift reaction. Maximum yield of methyl alcohol over CuO-ZnO/M catalyst was 5.1 mol% at $250^{\circ}C$ and 20 atm.

• The Korean Journal of Pesticide Science
• /
• v.13 no.3
• /
• pp.185-189
• /
• 2009

A monoterpenoid compound, benzylideneacetone (BZA), is a metabolite of an entomopathogenic bacterium, Xenorhabdus nematophila. Its primary biological activity is an inhibitor of phospholipase $A_2$, which catalyzes the committed step of biosynthesis of various eicosanoids that are critically important to mediate insect immune responses. When BZA was applied to two-spotted spider mite, Tetranychus urticae, it exhibited a dose-dependent mortality in leaf-disc assay. Subsequently BZA was tested against T. urticae infesting apples in a field orchard, in which it showed a significant control efficacy, which was not statistically different with that of a commercial acaricide. BZA also had significant antibacterial activities against three species of plant pathogenic bacteria when it was added to the bacterial cultures, in which it showed the highest inhibitory activity against a bacterial wilt-causing pathogen, Ralstonia solanacearum. The bacterial pathogen caused significant disease symptom to young potato plants. However, BZA significantly suppressed the disease occurrence. This study suggests that BZA can be used to develop a novel crop protectant to control mite and bacterial pathogen.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.437-446
• /
• 2017

70 percent of Korea's territory is covered with mountains, whose difficult conditions can cause damage to facilities. Recently, the demand for facilities related to outdoor activities including monorails has been on the rise, and such facilities are much more likely to become damaged. For this reason, a monitoring system applying IoT to mountainous areas was developed and its applicability is evaluated in this study. The current status of the existing mountainous facilities and monitoring systems were reviewed, and the current wired monitoring technology was analyzed. A scenario for IoT-based monitoring was developed, and then sensor nodes were developed, which include an RF-communication module and interface, power-supply and solar-cell. A testbed was set up at K University. The same data was collected by the wireless system as had been collected by the wired one. The study findings are as follows. Firstly, by using the wireless system, it is estimated that the construction duration can be reduced by about 25 percent, while the construction costs can be reduced by about 3~52 percent. Secondly, the safety of the construction workers can be improved by making the working conditions less dangerous, such as by eliminating the need to transport cables.