• Journal of the Korean Society for Railway
• /
• v.11 no.3
• /
• pp.233-239
• /
• 2008

It is very important to set a reliability target and verify the requirement when procuring the rolling stock in the aspect of safety, availability and LCC. While there are a few different methods to verify the reliability target, it is required that the most appropriate method should be used considering the characteristics of rolling stock itself and the operation environment. Even though recently the quantitative reliability requirements are widely adopted in domestic market, there is no substantial contents in the various standards and guidelines. In this study we investigate the various reliability demonstration test plans and evaluate them for rolling stock application. And three test plans among them were applied to the real operation data.

• Management & Information Systems Review
• /
• v.33 no.1
• /
• pp.299-312
• /
• 2014

This study is about the influence of perceived justice with service recovery on customer satisfaction and the customer's behavioral results. Even though prior studies estimated overall customer satisfaction, this study measured customer satisfaction separately in two parts: satisfaction with the service recovery and relationship satisfaction. The results are as follows. Distributive justice and interactional justice have positive effects on satisfaction with service recovery. But distributive justice, procedural justice and interactional justice have positive effects on relationship satisfaction. Satisfaction with the service recovery and relationship satisfaction have a positive effect on customer loyalty.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.496-496
• /
• 2011

A very simple and cost-effective method for fabrication of SiOx-incorporated diamond-like carbon (DLC) thin films at a preparation temperature of less than $200^{\circ}C$ was developed. Since DLC coating can be prepared not under vacuum but atmospheric conditions without any carrier gas flow, not only wafers but also powderic substrates can be used for DLC coating. Formation of DLC coating could result in appearance of superhydrophobic behaviors, which was sustained in a wide range of pH (1~14). DLC-coated surfaces selectively interacted with toluene in a toluene/water mixture. These results imply that our preparation method of the DLC coating can be useful in many application fields such as creating self-cleaning surfaces, and water and air purification filters.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.4
• /
• pp.15-22
• /
• 2011

U-Healthcare service is a real-time service using the vital signs which are continuously transferred from monitoring sensors attached to mobile patients under the wireless network environments. It should monitor the health condition of mobile patients everywhere at any time. In this paper, we have improved two features of the three layered mobile patient monitoring system with load balancing ability. First, the simulation process has been improved by allowing the number of related nodes to be changed. Secondly, we have modified S node to which queue is added to reduce the loss rate of collecting data from patients during the delay of S node process. And the data from the patient with high priority can be transferred to the server immediately through the filtering function. Furthermore, we have solved the problem of redundancy in sharing information among S nodes by differentiating process time to each S node. By performing a DEVS Java-based system simulation, we have verified the efficiency of this improved system.

• The Journal of the Korean dental association
• /
• v.58 no.8
• /
• pp.496-504
• /
• 2020

The osseointegrated implants react biomechanically in a different pattern to occlusal force, due to lack of the periodontal ligament unlike the natural teeth. The implants show markedly less movement and limited tactile sensitivity compared with the natural teeth. The implant occlusion concept aims to avoid overloading on the implants and to direct occlusal loads along the longitudinal axis of the implants, in order to compensate for the different biomechanics of the implants. Although many guidelines and theories on implant occlusion have been proposed, few have provided strong supportive evidence. Moreover, the outcome of treatment often quite successful in spite of different concepts of occlusion and there is an increasing tendency to doubt about the strict theoretical implant-specific occlusion concept. The purpose of this article is to review the previous reports about the concept of implant occlusion and discuss clinical occlusal considerations in implant rehabilitations.

• KSBB Journal
• /
• v.15 no.6
• /
• pp.673-676
• /
• 2000

In order to identification of carotenoid pigments of Haloarcular sp. EH-1 as a food for fish were analyzed. The content of carotenoids cultured in 3 L and 5 L bioreactor were 83.1 and 82.7 mg%, respectively. Identification of each carotenoid was achieved by means of co-TLC and co-HPLC with authentic specimens, spectroscopic and instrumental analyses, and chemical treatments as usual. The main components identified were ${\beta}$-carotene(8.1%), 3-hydroxyechinenone(42.0%) and astaxanthin(25.0%).

• Electronics and Telecommunications Trends
• /
• v.18 no.1 s.79
• /
• pp.7-16
• /
• 2003

최근 정보통신 서비스의 제공 영역은 댁내로 그 초점이 맞추어지고 있다. 특히 우리나라 거주 환경은 주로 아파트 등에 의한 공동주택이므로 초고속 정보통신 서비스를 댁내로 효과적으로 유입하려면 이에 적합한 연계 시설이 이루어져야 한다. 최근의 통신기술은 나날이 발전하고 있어 기존의 전화망 설비를 기반으로 하더라도 새로운 네트워크 구성 방식이 요구되고 있기 때문에 댁내(공동주택 구내)의 통신설비 또한 새로운 양상으로 진화되고 있다. 이러한 댁내통신설비의 수용을 위하여는 그 확보 공간과 최적의 운용을 위한 환경이 마련되어야 한다. 본 논문에서 다루고자 하는 내용은 댁내통신설비의 설치 공간과 운용환경 중에서도 특히 운용환경에 대한 것으로서 위와 같은 새로운 초고속통신망 서비스 수용을 원활히 이룰 수 있도록 기존의 열악한 환경을 개선하고 적절한 환경 기준 또는 표준을 마련하기 위하여 댁내통신설비와 관련된 국제표준 중심의 각종 기준들을 분석하고 이에 더하여 실제의 공동주택 현장에서의 실태를 조사 분석하여 그 개선 방안을 절충함으로써 앞으로의 댁내통신설비 기술의 발전 추세에 발맞추고자 한 것이다.

• Journal of the Korea Society for Simulation
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2012

In recent days, global shipbuilding companies have been showing great interest in eco-friendly ship products and trying to reduce environmental pollution - harmful gas and dust in shipbuilding process. Following this trend, Life Cycle Assessment (LCA) was carried out to an application of shipyards layout. LCA is a technique used to assess environmental impacts during the life cycle of products and systems. Until now, LCA has been used through ISO 14040 in somewhat limited industries, such as Building Life Cycle Assessment. Thus, this study analyzes the shipyard layout planning framework and builds life cycle inventory along with the simulation model structure to evaluate environmental impacts.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.07a
• /
• pp.493-494
• /
• 2014

본 논문에서는 2014년도 청강문화산업대학교 게임전공에서 진행된 졸업 작품의 QA 절차에 대해 서술 되어 있다. 졸업 작품이 기획될 때부터 기획서나 관련 문서들을 분석하여 QA가 어떻게 진행되었는지에 대한 내용과 QA를 진행한 결과에 대한 분석이 포함되어있다. QA가 진행된 게임은 Unity 3D 엔진으로 개발된 '안드로메다'팀의 1Hour 과 야근컴퍼니'팀의 Epi&Sode, '개미즈'팀의 DeadLine 이며 QA에 사용된 기법은 '체크리스트(check lists)라는 기법을 이용하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.07a
• /
• pp.473-475
• /
• 2014

게임은 과거와는 달리 전반적인 기술이 향상되면서 표현의 한계가 넓어지면서 3D공간에서 현실과 같은 착각을 일으킬 수 있을 정도로 다이내믹한 장면이 연출이 가능해졌다[1]. 플레이어의 반사 신경을 자극하여 캐릭터를 조작하는 쾌감을 느낄 수 있는 액션요소[2]를 덧붙여 다이내믹한 연출과 게임의 액션요소를 결합한 게임을 개발하였다.