• Title/Summary/Keyword: 면허취득

Search Result 55, Processing Time 0.026 seconds

Design and Implementation of Automatic Scoring Software to improve the Efficiency of Driving License Test (운전면허시험 효율성 향상을 위한 자동채점 소프트웨어 설계 및 구현에 관한 연구)

  • Kim, Cheol Woo;Yang, Jaesoo;Na, Wonshik
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.16 no.2
    • /
    • pp.180-189
    • /
    • 2017
  • Some people who take a driver's license test retake it again because of license cancellation, but most of them take the test for the first time to drive the car. Driving a car is directly linked to life, and the initial correct driving habits are more important than anything else. In particular, it is very important to obtain a license by evaluating the correct driving ability based on objective and fair standards when learning the first driving, because many people acquire a driving license while entering the society for the first time. In this paper, we propose the S / W design and its main functions that can emit high quality drivers through efficient, fair and accurate automated scoring. Through this, it is proposed to improve the automatic grading driver's license system, to prevent traffic accidents, and to reduce traffic accidents through proper driving.

Consciousness and Behavior of the Radiation Safety Management by Clinical Pathologists (임상병리사의 방사선안전관리에 대한 고찰)

  • Kim, Jean-Soo;Lee, Jin-Yong;Lee, Moo-Sik;Na, Baeg-Ju;Hong, Jee-Young;Go, Eun-Ju
    • Proceedings of the KAIS Fall Conference
    • /
    • 2011.05b
    • /
    • pp.1052-1056
    • /
    • 2011
  • 이 연구는 동위원소실에 근무하는 임상병리사들의 방사선 방어에 대한 지식, 태도 및 행위수준을 조사하여 상관관계를 파악하고 방사선 안전관리에 대한 행위에 영향을 미치는 요인을 분석하기 위해 시행하였다. 설문지는 2010년 10월부터 11월까지 대전 충청권 및 서울 경기권 동위원소실 임상병리사를 연구 대상자로 하여 연구자자 임의로 선정 직접설문, 또는 우편방식으로 조사하였고, 수집된 자료는 SPSS12.0 프로그램을 이용하여 빈도와 백분율, T-검정, ANOVA, 다중회귀분석법을 이용하여 분석하였다. 방사선 안전관리에 대한 지식 점수는 평균은 11.5점이었으며 표준편차는 ${\pm}$1.9 분포를 보였다. 방사선 안전관리에 대한 태도 점수는 평균 69.0점, 표준편차는 ${\pm}$5.4이었다. 방사선 방어에 대한 행위점수는 평균은 57.1점, 표준편차 ${\pm}$3.5이었다. 방사선 안전관리 행위에 있어 이론적으로 알고 있는 내용에 비해 수행이 현저히 떨어진 결과가 나왔으며, 방사선 안전관리에 대한 지식, 태도, 행위와의 상관성은 통계적으로 유의한 상관관계를 보였다(p<0.01). 행위점수에 영향을 미치는 요인으로는 종사자법정교육, RI 면허취득, 지식, 태도로 나타났다. 결론적으로 동위원소실에 근무하는 임상병리사의 방사성동위원소 안전관리 행위는 태도에 비하여 수행이 현저히 떨어진 결과가 나왔고, 안전관리 행위에 영향을 주는 인자로 종사자법정교육, RI 면허취득, 지식점수, 태도점수를 알 수 있었다. 업무 진행에 있어 잘못된 지식의 습득 및 태도를 취할 수 있는 가능성이 충분히 있으며 이를 바로 잡을 수 있도록 안전관리에 대한 지속적인 교육을 실시함과 더불어 RI면허 취득, 방사선 종사자에게 교육의 효과를 더욱 높이기 위한 적절한 교육 자료의 개발이 필요하다고 할 수 있다.

  • PDF

DPO 면허취득과정의 최근 동향

  • Ye, Byeong-Deok
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2015.07a
    • /
    • pp.57-59
    • /
    • 2015
  • 심해에서의 유전개발이 활성화되면서 이러한 개발에 필수적인 장비인 동적위치제어시스템 (Dynamic Positioning System, DPS)을 설치한 선박 또는 해양구조물의 수요도 폭발적으로 증가하고 있으며, 이에 따라 DPS 운영에 필수적인 DPO (Dynamic Positioning Operator) 자격증을 취득하고자 하는 지원자도 매년 급속하게 증가하고 있다. 그러나 DPO 교육훈련과정은 강제요건이 아니며, 따라서 엄정한 자격증명 및 검증이 어려운 실정이다. 특히 매년 2000건 이상의 신규면허를 심사하고 발급하는 것은 물론 기존 면허자에 대한 재검증 절차도 수행하여야 하는 현재의 상황으로 볼 때 효율적인 DPO 양성을 기대하기는 어려운 실정이다. 이 연구에서는 보다 이러한 문제점을 개선하여 보다 더 효율적이면서도 엄정한 DPO 양성을 위한 제도개선을 제안한다.

  • PDF

해외건설 관계법령 및 정책방향

  • 김선태
    • 월간 기계설비
    • /
    • s.95
    • /
    • pp.65-82
    • /
    • 1998
  • 최근들어 전문건설업계의 해외건설면허 취득이 늘어남에 따라 설비건설업계에서도 해외건설면허를 확보한 회원사가 급증하고 있다. 해외건설면허는 좁은 국내시장을 탈피함은 물론 고품질 확보로 국제경쟁력 강화등 많은 장점이 있어 관심의 대상으로 부각되고 있다. 게다가 IMF한파에 대한 돌파구의 일환으로 해외건설에 대한 관심은 더욱 고조되고 있다. 이러한 시점에서 해외건설협회가 지난 4월 8일부터 10일까지 3일간 회원사들을 상대로 실시한 ${\ulcorner}$해외건설 실무교육 신임과정${\lrcorner}$교육은 관련업계의 관심을 모았다. 본지는 독자적인 해외건설 진출에 미숙한 설비건설업계의 사정을 고려, ${\ulcorner}$해외건설 실무교육 신임과정${\lrcorner}$ 교육중 해외건설 관계법령 및 정책방향을 게재한다.

  • PDF

Correlations between Radiological Technology Graduates' Academic Achoevement and their Obtainment of a License (방사선과 졸업생의 학업성취도와 면허 취득의 관계)

  • Park, Myeong-Hwan;Kwon, Deok-Moon;Seo, Soo-Kyo
    • Journal of radiological science and technology
    • /
    • v.29 no.1
    • /
    • pp.47-52
    • /
    • 2006
  • This study analyzed the correlations between variables like characteristics related to admission, academic achievement, obtainment of a radiological technology license. A majority of participants were from Daegu and academic high schools. Many participants were accepted by general admission selection, and their reason to apply to Daegu Health College was high graduate employment. Their selection for the academic program was made by their parents and themselves. Those who took the same course twice held 35.1%, and those who got an academic warning took 8.5%. The degree of participants' academic achievement showed somewhat low, and they had difficulty in taking their major courses. The average grade for admission was lower in a following selection order: college graduates, general, special, and rural areas. The admission selections and taking science courses in high school showed little significant correlations with obtainment of a radiological technology license. However, the obtainment of the license had significant correlations with retaking the same course, getting an academic warning, and the degree of academic achievement. The results also revealed that the obtainment of the license had little significant correlations with a part-time job experience, having a boy/girlfriend, and student club participation, but it had significant correlations with accommodations and study club participation. In conclusion, it is important to point out that radiological technology graduates' obtainment of a license is closely related with the degree of their academic achievement and their college life.

  • PDF

The Analysis of Raw Data of Completion of Off-Line Continuing Education in Nursing in Seoul, 2008-2012 (서울지역 간호사 보수교육 실시 분석 -오프라인교육 중심으로-)

  • Go, Jeong-Hee;Han, Mi-Ra;Hu, Jung
    • Journal of Digital Convergence
    • /
    • v.12 no.6
    • /
    • pp.527-538
    • /
    • 2014
  • The purpose of this paper was to analyze the Data of Continuing Nursing Education(CNE) in Seoul from 2008 to 2012. The subjects were collected from the data of Seoul Nurses Association. Descriptive statics, t-test, ANOVA were performed using SPSS 12.0 program for a total of 165,759 subjects' data. The number of continuing education recipients increased about 28% by the year of 2012. Over 50% of subjects worked at advanced hospitals and about 80% of subjects received education in self-developed program type. According to years since licensed, more than half(55.5%) of the subjects were under 7 years since licensed, followed by 4-6years since licensed(18.5%), 2-3years since licensed(16.2%), and 1year since licensed(9.7%). This study showed significant differences in contents, continuing education programs, workplace, type of continuing education. The findings of this study will contribute to identifying current trends of continuing education for nurses and provide fundamental data for developing continuing nurses education.

A research on the necessity of e-learning multimedia contents: applying the customized driver's license exzmination learning system (맞춤형 운전면허 학과시험 학습 시스템을 사용한 E-Learning 멀티미디어 콘텐츠의 필요성 연구)

  • Lee, sung-haeng;Min, Byung-won;Oh, yong-sun
    • Proceedings of the Korea Contents Association Conference
    • /
    • 2011.05a
    • /
    • pp.351-352
    • /
    • 2011
  • 운전면허 시험이 존재하는 동안 운전면허 학과시험은 필수적인 시험제도로 존재 할 것이며 향후 상당기간동안 지속적으로 산업화가 될 것으로 전망 된다. 그러나 기존의 서적을 통한 학습은 이미 출제 되었던 문제로 지정된 상황에 대한 대처 방법을 평가하는 것에 지나지 않는다. 또한 운전면허 학원에서 학과시험을 취득 할 경우 과도한 시간과 경비가 소요할 뿐만 아니라 학습효과 면에서도 비효율적인 것으로 평가되고 있다. 때문에 학습자의 능력, 연령 등을 고려한 맞춤형 운전면허 학과시험 시스템의 시급의 도입이 시급하며 이를 편리하게 학습 할 수 있는 E-Learning 멀티미디어 콘텐츠 개발이 필요하다. 이에 본 연구는 이러한 필요성에 따라 학습자의 상황에 맞는 맞춤형 교육이 이루어 질 수 있는 맞춤형 운전면허 학과시험 학습 시스템을 제안하고자 한다. 이를 통해 학습자의 문항반응의 오답분석을 통하여 최적의 평가문제와 학습콘텐츠를 선택하여 학습자에게 제공하는 과정을 반복함으로써 동적 맞춤형 E-Learning 학습방식을 제공하고, 난해한 교통 법규를 쉽고 재미있게 학습할 수 있을 것으로 기대해 본다.

  • PDF

KOSHA 18001 - 자율안전관리체계 구축의 "건설업 안전보건경영시스템"

  • 대한설비건설협회
    • 월간 기계설비
    • /
    • s.261
    • /
    • pp.73-79
    • /
    • 2012
  • 최근 몇 년간 지속된 국내 건설경기 침체로 설비건설업계는 많은 어려움을 겪고 있다. 또한 금년 1월 1일부터 기계설비공사의 겸업제한이 폐지되면서 일반건설사도 기계설비의 면허취득이 가능해지는 등 설비건설업계에 많은 변화가 일고 있다. 이처럼 개방과 불황의 파고를 넘기 위해서는 기업의 경쟁력 강화가 그 어느 때보다도 절실히 요구되고 있다. 기업은 신기술 신공법 개발 및 알뜰경영으로 경쟁력을 강화시키는 것도 중요하지만 전사적인 안전관리로 근로손실에 의한 생산성 저하, 재해보상금 지급 등 안전사고와 관련한 지출을 크게 줄이는 것도 경쟁력 강화의 한 요인으로 주목되고 있다. 최근들어 안전 보건 및 환경 등에 대한 관심이 높아지면서 건설업계는 기업경영의 우수성을 객관적으로 평가받을 수 있는 안전보건경영시스템 인증 취득이 늘어나고 있다. 더구나 설비건설업계의 숙원사업인 분리발주와 유사한 주계약자공동도급이 올해부터 기계설비공사에 적용되면서 일반건설업체도 기계설비건설업체와 공동도급을 받기 위해 노력하고 있다. 이럴 때 설비건설업체가 경쟁에서 우위를 선점할 수 있는 요건은 무엇일까? 기술력, 신뢰도 등 여러 가지 요인이 있겠지만 안전보건경영시스템 인증도 한 몫 할 수 있을 것으로 예상된다. 지난 2001년 안전보건경영시스템 인증이 도입된 이후 지난 3월 30일 현재 설비건설업계는 14개 업체가 인증을 취득했다. 본지는 지난 2006년 9월호에 건설업 안전보건경영시스템을 특집으로 소개한 바 있다. 최근들어 안전보건경영시스템에 대한 관심이 높아지면서 이에 대한 문의가 많아짐에 따라 이번 호에는 안전보건경영시스템에 대해 다시 한번 알아본다.

  • PDF