• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.244.1-244.1
• /
• 2014

디스플레이 패널의 터치 스크린에 가장 널리 사용되는 ITO 전극은 사용자의 눈에 전극 면이 시각적으로 구분되지 않도록 해야 한다. 따라서 최근에는 ITO 전극 면이 구분되지 않도록 하기 위해 다층 박막으로 이루어진 인덱스 매칭(index matching, IM) 기술을 이용하여 ITO 전극 필름을 제작하고 있다. 이러한 인덱스 매칭된 ITO 필름은 기판이나 공정 조건, 인덱스 매칭 층의 물질 종류에 따라 ITO 박막의 전기적 광학적 특성이 각각 다르게 나타나기 때문에 이에 대한 많은 연구가 이루어지고 있다. 본 연구에서는 롤투롤 스퍼터링(roll to roll sputtering) 방법으로 고굴절과 저굴절이 순차적으로 코팅 처리된 PET 기판 위에 ITO 박막을 증착하여 IM-ITO 필름을 제작하고 전기적 광학적 특성을 관찰하였다. 이를 위해 습식(wet) 코팅 방법으로 저굴절층과 고굴절층을 PET 필름 위에 코팅하여 IM층을 제작한 PET 필름 위에 ITO 박막을 증착하고, $150^{\circ}C$로 후 열처리를 하여 인덱스 매칭된 ITO 필름을 제작하였다. 제작된 필름은 GIXD를 이용하여 박막의 구조와 결정성을 조사하였고, 면저항 측정기와 홀측정 장치를 이용하여 전기적 특성을 관찰하였다. 그리고 분광광도계와 탁도(haze) 측정기를 이용하여 광학적 특성을 조사하였다. 본 연구를 통해 롤투롤 스퍼터링 방법으로 유무기 복합막으로 구성된 IM-ITO 박막의 전기적 광학적 구조적 특성에 대해 보고하고자 한다.

• The Journal of Natural Sciences
• /
• v.8 no.1
• /
• pp.137-143
• /
• 1995

The purpose of this study is to investigate the change of shrinkage, tensile strength, elasticity, light-fastness and color-fastness of 100% cotton upper under wear after acidic treatment and repeated washing and drying. Both of warp and welt were shrinked, especially in the early washing stage. Tensile strength was not weakened by 15 times of repeated washing. Hunter whiteness(HW) of white-underwear decreased, but color difference($\Delta$E) and yellow index(YI) increased corresponding to the frequency of washing and sunlight drying. The discoloration of color-underwear was significant in the early stage.

• Composites Research
• /
• v.13 no.4
• /
• pp.67-74
• /
• 2000

The general solution of the anti-plane shear problem for the curved interfacial crack between viscoelastic foam and composites was investigated with the complex variable displacement function. Kelvin-Maxwell three parameter model is used to present viscoelasticity and the Laplace transform was applied to treat the viscoelastic characteristics of foam in the analysis. The stress intensity factor near the interfacial crack tip was predicted by considering both anisotropic and viscoelastic properties of two different materials. The results showed that the stress intensity factor increased with increasing the curvature of the curved interfacial crack and it also increased and eventually converged to a specific value with increasing time. The stress intensity factor increased with increasing the ratio of stiffness coefficients between foam and composites and the effect of fiber orientation on the stress intensity factor decreased with increasing the ratio of stiffness coefficients between foam and composites.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2
• /
• pp.26-30
• /
• 1997

In this paper, the thickness measurement method of adhesive layers of multilayers using power cepstrum signal processing technique has been proposed. The peak values for reflected signal from each layer have been separated by power cepstrum technique. Therefore, thickness of adhesive layers have been measured by the intervals of peak signal. In the experiment, the adhesive layers of 0.5mm-0.75mm thickness using epoxy(2-Ton and Plastic Steel Putty(A)) between the aluminum and the brass were formed. The adhesive layer thickness which is calculated with data of reflected signal by ultrasonic pulse-echo method was within error 1.34% of the measured values.

• 한국벤처창업학회:학술대회논문집
• /
• 2019.11a
• /
• pp.153-155
• /
• 2019

최근 국내 외를 불문하고 IT기술의 비약적인 발전에 따라 금융분야에서도 금융과 기술이 결합된 새로운 형태의 금융서비스가 다양하게 개발되고 있다. 그러나, 개인금융시장의 비약적 발전에도 불구하고, 기업금융시장에서의 핀테크 활용은 아직까지 미미한 실정이다. 기업 신용평가는 재무제표 위주의 정태적(static) 과거 정보 위주로 이루어지고 있어 업력이 짧고 규모가 영세한 중소기업의 금융접근에 제약이 존재한다. 또한, 중소기업의 인력이 부족한 상황에서 모든 거래를 일일이 금융기관을 방문하여 처리해야 하는 불편함도 애로사항으로 파악되었다. 이러한 한계를 해소하기 위해 신용보증기금은 빅데이터 활용과 비대면 채널에 주목하였다. 본 보고서는 신용보증기금이 빅데이터와 비대면 채널을 활용하여 중소기업의 금융접근성을 향상시킨 사례에 대하여 소개하고자 한다. 첫 번째로, 신보는 기존에 활용되지 못한 동태적(dynamic) 빅데이터를 활용하여 기업의 현재 새로운 신용평가모형을 개발하였다. 두 번째로, 신보는 중소기업의 금융거래 편의성 향상을 위해 비대면 금융업무 플랫폼을 도입하였다. 신보는 이를, 데이터 수집이 체계적이고 정교해야 하며, 중소기업 관련 데이터가 공유되어야 한다는 정책적 시사점을 발견하였다. 이러한 정책적 시사점을 바탕으로 신보는 이제 기업 데이터 뱅크(Data Bank)로서의 역할을 도모하고 있으며, 더 나은 기업정보 생태계를 구현하고자 한다. 이를 통해 신보의 신기술을 활용한 중소기업 금융접근성 제고 사례가 핀테크를 활용한 공공기관의 금융정책 수립에 유용한 사례가 될 수 있을 것으로 기대한다.

• Journal of Bio-Environment Control
• /
• v.21 no.1
• /
• pp.12-19
• /
• 2012

This research was performed to determine the appropriate daily last irrigation time to enhance the plant growth and the water and fertilizer use efficiencies in coir bag culture for tomato plant. The time to finish the daily irrigation was set by 1, 2, 3 and 4 hours before the sunset. The water content in the substrate was greatly affected by the last irrigation time. The earlier the last time, the greater the daily fluctuation of water contents in the substrate. The daily irrigation times were not affected by using irrigation management system controlled by drainage electrodes or the physiochemical properties of coir. The growth characteristics were not significantly different among the treatments. The highest marketable yields were obtained in the treatment finishing two hours before sunset, and the lowest yields were obtained in the the treatment finishing 4 hours before sunset. Based on the result from surveying quantity of irrigated water for 128 days of the experiment period, the water and fertilizer use efficiencies were lowest in the treatment finishing 4 hours before sunset, and the highest in the treatment finishing 2 hours before sunset. In terms of plant growth, yields, water and fertilizer use efficiencies, 2 hours before sunset treatment was determined as the most economical and desirable irrigation schedule.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.2
• /
• pp.282-297
• /
• 2019

Detection of mesoscale oceanic eddies using satellite data can utilize various ocean parameters such as sea surface temperature (SST), chlorophyll-a pigment concentration in phytoplankton, and sea level altimetry measurements. Observation methods vary for each satellite dataset, as it is obtained using different temporal and spatial resolution, and optimized data processing. Different detection results can be derived for the same oceanic eddies; therefore, fundamental research on eddy detection using satellite data is required. In this study, we used ocean color satellite data, sea level altimetry data, and infrared SST data to detect mesoscale eddies in the East Sea and compared results from different detection methods. The sea surface current field derived from the consecutive ocean color chlorophyll-a concentration images using the maximum cross correlation coefficient and the geostrophic current field obtained from the sea level altimetry data were used to detect the mesoscale eddies in the East Sea. In order to compare the eddy detection from satellite data, the results were divided into three cases as follows: 1) the eddy was detected in both the ocean color and altimeter images simultaneously; 2) the eddy was detected from ocean color and SST images, but no eddy was detected in the altimeter data; 3) the eddy was not detected in ocean color image, while the altimeter data detected the eddy. Through these three cases, we described the difficulties with satellite altimetry data and the limitations of ocean color and infrared SST data for eddy detection. It was also emphasized that study on eddy detection and related research required an in-depth understanding of the mesoscale oceanic phenomenon and the principles of satellite observation.

• Journal of Digital Convergence
• /
• v.20 no.2
• /
• pp.289-297
• /
• 2022

The purpose of this study was to investigate the perception of dental students based on their experiences of online classes after taking non-face-to-face education courses for all the school semesters in 2020. For the research method, an online survey was conducted on A survey was conducted on 161 dental students enrolled in A University. The analytical method was conducted through frequency analysis, correlation analysis, and multiple regression analysis. The survey analysis findings showed that the satisfaction of dental students' about the non-face-to-face education course was above 4.2, and the detailed items were in the order of the appropriateness of the attendance processing method, satisfaction with recorded video lectures, and the assessment method of the course grade. In the case of the factors that affect the satisfaction of non-face-to-face education courses, the learning system and assessment method were statistically significant. The online class type that is most preferred by the students is recorded video lectures, and the highest number of participants chose 21~30 minutes as the appropriate time for the class content. It is considered that the application of the online system will continue to be used together with face-to-face education courses in the education site and various university-level efforts like systematic support are required to achieve effective learning achievements. This study only investigated the non-face-to-face education operation conditions of A University, so it cannot be generalized to all universities, but it can be used as basic data to provide education curriculum design and supportive measures for the compatibility of face-to-face and non-face-to-face courses.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.2
• /
• pp.46-53
• /
• 2000

Hot forging of aluminum alloy has the bad machinability due to continuous chip formation caused from the ductility The bad machinability requires a labor and a high cost to produce final products after hot forging. In industrial field, T4 heat treatment is performed to improve the machinability, and the annealing and the cold sizing are followed. In this study, a series of heat treatments are introduced during hot forging operation without T4 heat treatment after forming so that it improves the machinability with reduction of the number of operations and machining cost. Instead of T4 heat treatment, water cooling and air cooling are tried and compared to find out an optimum cooling condition

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.2
• /
• pp.251-254
• /
• 2014

In this paper, we studied a technique of extracting a Frequency Hopping(FH) signal for analysis using high-speed parallel processing structure. Unlike fixed frequency signal, FH signal is difficult to detect and analyze because FH systems use many random frequencies instead of a single carrier frequency. To solve this problem we designed a method that analyze FH signal using high-speed parallel processing. In order to apply parallel processing, we use CUDA using GPU and compare single processing with prarallel processing. As a result, using CUDA on a GPU is about 8.53 times faster than single processing.