• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.181-186
• /
• 2003

The satellite navigation system is widely used for identifying a user's position regardless of weather or geographic conditions and also make effect on new technology of marine LBS(Location Based Service), which has the technology of geographic information such as the ENC. Generally, there are conceivable systems of marine LBS such as ECDIS, or ECS that use the ENC itself with powerful processor in installed type on ships bridge. Since the ENC is relatively heavy structure with dummy format for data transfer between different systems, we should reduce the ENC to small and compact size in order to use it in mobile platform. In this paper, we assumed that the mobile system like PDA, or Webpad can be used for small capability of mobile platform. However, the ENC should be updated periodically by update profile data produced by HO. If we would reduce the ENC without a consideration of update, we could not get newly updated data furthermore. As summary, we studied considerations for ENC reduction with update capability. It will make the ENC be useful in many mobile platforms for various applications.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.222-235
• /
• 2007

The objectives of this study was to evaluate the effect of thermocycling on the ${\mu}TBS$ (microtensile bond strength) to dentin with four different adhesive systems to examine the bonding durability. Freshly extracted $3^{rd}$ molar teeth were exposed occlusal dentin surfaces, and randomly distributed into 8 adhesive groups 3-steps total-etching (Scotchbond Multi-Purpose Plus; SM, All Bond-2; AB), 2-steps total-etching (Single Bond; SB, One Step plus; OS), 2-steps self-etching (Clearfil SE Bond; SE, AdheSE AD) and single-step self-etching systems (Promp L-Pop; PL, Xeno III; XE) Each adhesive system in 8 adhesives groups was applied on prepared dentin surface as an instruction and resin composite (Z250) was placed incrementally and light-cured. The bonded specimens were sectioned with low-speed diamond saw to obtain $1\times1mm$ sticks after 24 hours of storage at $37^{\circ}C$ distilled water and proceeded thermocycling at the pre-determined cycles of 0, 1,000 and 2,000. The ${\mu}TBS$ test was carried out with EZ-tester at 1mm/min. The results of bond strength test were statistically analyzed using one-way ANOVA/ Duncan's test at the a < 0.05 confidence level. Also, the fracture mode of debonded surface and the interface were examined under SEM. The results of this study were as follows ; 1. 3-step total etching adhesives showed stable, but bond strength of 2-step adhesives were decreased as thermocycling stress. 2. SE showed the highest bond strength, but single step adhesives (PL, XE) had the lowest value both before and after thermocycling. 3 Most of adhesives showed adhesive failure. The total-etching systems were prone to adhesive failure and the single-step systems were mixed failure after thermocycling. Within limited results of this study, the bond strength of adhesive system was material specific and the bonding durability was affected by the bonding step/ procedure of adhesive Simplified bonding procedures do not necessarily imply improved bonding performance.

• Restorative Dentistry and Endodontics
• /
• v.33 no.4
• /
• pp.332-340
• /
• 2008

The purpose of this study was to evaluate the viability of periodontal ligament cell in rat teeth using slow cryopreservation method with magnetic field through MTT assay and TUNEL test. For each group, 12 teeth of 4 weeks old white female Sprague-Dawley rat were used for MTT assay, and 6 teeth in TUNEL test. The Maxillary left and right, first and second molars were extracted as atraumatically as possible under tiletamine anesthesia. The experimental groups were group1 (immediately extraction), group 2 (cold preservation at 4$^{\circ}C$ for 1 week), group 3 (rapid cryopreservation in liquid nitrogen), group 4 (slow cryopreservation with magnetic field of 1 G), and group 5 (slow cryopreservation). F medium was used as preservation medium and 10% DMSO as cryoprotectant. After preservation and thawing, the MTT assay and TUNEL test were processed. One way ANOVA and Scheffe method were performed at the 95% level of confidence. The value of optical density obtained after MTT analysis was divided by the value of eosin staining for tissue volume standardization. In both MTT assay and TUNEL test, it had showed no significant difference among group 3, 4, and 5. And group 3 had showed higher viability of periodontal ligament cell than group 2. From this study, slow cryopreservation method with magnetic field can be used as one of cryopreservation methods.

• Korean Journal of Environmental Biology
• /
• v.32 no.1
• /
• pp.58-67
• /
• 2014

The outdoor mass cultivation is not possible for microalgae in Korea all year round, due to cold winter season. It is not easy to maintain proper level of productivity of microalgae even in winter. To prevent a drastic decrease of temperature in a greenhouse, two layers were covered additionally, inside the original plastic layer of the greenhouse. The middle layer was made up of plastic and the inner layer, of non-woven fabric. Acrylic transparent bioreactors were constructed to get more sunlight, not only from the upper side but also from the lateral and bottom directions. In winter at freezing temperatures, six different culture conditions were compared in the triply covered, insulated greenhouse. Wastewater after anaerobic digestion was used for the cultivation of microalgae to minimize the production cost. Water temperature in the bioreactors remained above $10^{\circ}C$ on average, even without any external heating system, proving that the triple-layered greenhouse is effective in keeping heat. Algal biomass reached to 0.37g $L^{-1}$ with the highest temperature, in the experimental group of light-reflection board at the bottom, with nitrogen and phosphorus removal rate of 92% and 99%, respectively. When fatty acid composition was analyzed using gas-chromatography, linoleate (C18 : 3n3) occupied the highest proportion up to 61%, in the all experiment groups. Chemical oxygen demand (COD), however, did not decrease during the cultivation, but rather increased. Although the algal biomass productivity was not comparable to warm seasons, it was possible to maintain water temperature for algae cultivation even in the coldest season, at the minimum cost.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.685-698
• /
• 1995

This study was conducted to the effect of temporary cement on the adhesiveness of dentin bonding agent to dentin surface. One hundred freshly extracted bovine mandibular incisors were grinded to expose flat labial dentin surface. The dentin surfaces were temporarized with either eugenol-containing temporary cement(TemBond and Zinc Oxide Eugenol cement) or non-eugenol temporary cement(Nogenol and TempBond NE) for 7days, and then the temporarization was removed with surgical currette and the exposed dentin surfaces were water-rinsed. Bonding specimens were made by use of All-Bond 2 and Super-Bond C&B dentin bonding agent, and stored in $37^{\circ}C$ distilled water for 24hours. The tensile bond strenth and the cohesive failure rate were measured, and then the pretreated dentin surfaces which the temporary cement had been applied to and removed from and the fractured dentin surfaces after bonding test were examined under scanning electron microscope. The results were as follows : In case of bonding with All-Bond 2, tensile bond strength of each experimental group was lower than that of the control group(p<0.05), but there was no significant difference between the bond strengths of the control group and each experimental group in case of bonding with Super-Bond C&B(p>0.05). No significant difference between tensile bond strength of experimental group, whether temporary cement contains eugenol or not, was seen(p>0.05). In case of bonding with All-Bond 2, the control group showed cohesive-adhesive mixed failure mode and the experimental groups mainly showed adhesive failure mode, but in case of bonding with Super-Bond C&B, almost of the control and the experimental groups mainly showed cohesive failure mode. On SEM examination, all of the dentin specimens pretreated with either 10 % phosphoric acid or 10% citric acid after application of the temporary cements demonstrated remnants of temporary cement attached to dentin surface.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.3
• /
• pp.151-158
• /
• 2002

In Korean high yielding varieties developed by crosses between indica and japonica rice, the most limiting factor for yield increase may be attributed to the less number of tillers per unit area. The goal of this study is to find out the effect of the environmental factors as well as cultivation practice on the development and increase of tillers of Dasanbyeo, the high yielding indica / japonica hybrid cultivar. The effect of temperature was examined with 3 different light intensity, 220,600, and 1220 $\mu$㏖/s/$m^2$, respectively. For all the experiments, the leading japonica variety in Korea, Hwaseongbyeo, was used fur the check cultivar for the comparison with Dasanbyeo. The increase of the tillers was more prominent in Dasanbyeo than in Hwaseongbyeo at 220 $\mu$㏖/s/$m^2$ of light intensity, while the similar increase of tiller no. was found at 600 $\mu$㏖/s/$m^2$ of light intensity treatment. However, Hwaseongbyeo showed more rapid increase of tiller at 1220 $\mu$㏖/s/$m^2$ of light intensity. The mean number of the primary tiller ranged 5 to 7 in Dasanbyeo, and 2 to 7 in Hwaseongbyeo, showing greater variation in the latter case. However, the secondary tiller number ranged from 2 to 13 for the former, and 2 to 12 for the latter. The earliest initiation of tiller node of Dasanbyeo and Hwaseongbyeo was observed on 6 and 4 days after transplanting(DAT), respectively, at 600 $\mu$㏖/s/$m^2$ of light intensity, while 10, and 7 DAT, respectively, at 1,220 $\mu$㏖/s/$m^2$. No cultivar difference was observed at 600 $\mu$㏖/s/$m^2$ with the 18 DAT. The ratio of effective tiller was lower in Dasanbyeo, ranging from 47 to 55% than in Hwaseongbyeo, ranging from 72 to 100%.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.1
• /
• pp.88-95
• /
• 2002

In recent years, the security of hardware and software systems is one of the most essential factor of our safe network community. As elliptic Curve Cryptosystems proposed by N. Koblitz and V. Miller independently in 1985, require fewer bits for the same security as the existing cryptosystems, for example RSA, there is a net reduction in cost size, and time. In this thesis, we propose an efficient hardware architecture of underlying field arithmetic processor for Elliptic Curve Cryptosystems, and a very useful method for implementing the architecture, especially multiplicative inverse operator over GF$GF (2^m)$ onto FPGA and futhermore VLSI, where the method is based on optimized unit operation components. We optimize the arithmetic processor for speed so that it has a resonable number of gates to implement. The proposed architecture could be applied to any finite field $F_{2m}$. According to the simulation result, though the number of gates are increased by a factor of 8.8, the multiplication speed We optimize the arithmetic processor for speed so that it has a resonable number of gates to implement. The proposed architecture could be applied to any finite field $F_{2m}$. According to the simulation result, though the number of gates are increased by a factor of 8.8, the multiplication speed and inversion speed has been improved 150 times, 480 times respectively compared with the thesis presented by Sarwono Sutikno et al. [7]. The designed underlying arithmetic processor can be also applied for implementing other crypto-processor and various finite field applications.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.2
• /
• pp.135-141
• /
• 2016

This study amied to determine the effect of species and seed mixture on productivity, botanical composition and forage quality in middle mountainous region (Geosan) pasture. Total seven experimental pastures (T1 : Orchardgrass, T2 : Timothy, T3 : Tall fescue, T4 : Perennial ryegrass, T5 : Kentucky bluegrass, T6 : Timothy + Orchardgrass + Tall fescue + Alfalfa, T7 : Timothy + Orchardgrass + Kentucky bluegrass + White clover) were established in autumn, 2014 and evaluated for productivity and agronomic characteristics for 2015. Plant heigh was high in Orchardgrass and Perennial ryegrass pasture. Dry matter (DM) content was high in Kentucky bluegrass. Botanical composition in $1^{st}$ harvest was high in shrub, but the grass composition was high in $2^{nd}$ and $3^{rd}$ harvest. Fresh and DM yield were higher in Orchardgrass and Perennial ryegrass (p<0.05); whreras, Kentucky bluegrass was the lowest. In seed mixture pasture, yields of T6 plot (Tall fescue) were higher than those of T7 (Kentucky bluegrass). Average CP (crude protein) content of $2^{nd}$ and $3^{rd}$ cutting time was 16.91 and 14.79%, respectively and Kentucky blue grass was the highest in $3^{rd}$ cutting time by 17.57%. IVDMD (in vitro dry matter digestibility) showed low in $1^{st}$ cutting and Kentucky bluegrass was the lowest in every cutting time. TDN (total digestible nutrient) content was the highest in $3^{rd}$ cutting and the lowest in $1^{st}$ cutting. These results indicated that Orchardgrass, Perennial ryegrass and T6 are recommendable for productivity and Timothy, Perennial ryegrass and T7 are recommendable for forage quality.

• Korean Journal of Food Science and Technology
• /
• v.46 no.5
• /
• pp.566-574
• /
• 2014

This study was conducted to compare the physicochemical composition and fermentation conditions of sliced, dried radish kimchi with flying fish roe (DFFR). The levels of crude protein, crude lipid, and crude ash in DFFR were higher than those in sliced, dried radish kimchi without flying fish roe (control). DFFR also contained higher levels of Fe and Ca, compared to the control. The inosine monophosphate (IMP) content of DFFR and control was 5.63 and 2.64 mg/100 g, respectively. The polyunsaturated fatty acid and DHA contents in DFFR were approximately 5 and 23 times higher than those in the control, respectively. The major free amino acids contained in these samples were arginine, proline, alanine, leucine, and valine. The number of cells belonging to the Leuconostoc species in DFFR was higher than that in the control. In sensory evaluation studies, DFFR scored the highest in terms of appearance, flavor, taste, and texture.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.1-7
• /
• 2017

Cobalt silicide was used as a counter electrode in order to confirm its reliability in dye-sensitized solar cell (DSSC) devices. 100 nm-Co/300 nm-Si/quartz was formed by an evaporator and cobalt silicide was formed by vacuum heat treatment at $700^{\circ}C$ for 60 min to form approximately 350 nm-CoSi. This process was followed by etching in $80^{\circ}C$-30% $H_2SO_4$ to remove the cobalt residue on the cobalt silicide surface. Also, for the comparison against Pt, we prepared a 100 nm-Pt/glass counter electrode. Cobalt silicide was used for the counter electrode in order to confirm its reliability in DSSC devices and maintained for 0, 168, 336, 504, 672, and 840 hours at $80^{\circ}C$. The photovoltaic properties of the DSSCs employing cobalt silicide were confirmed by using a simulator and potentiostat. Cyclic-voltammetry, field emission scanning electron microscopy, focused ion beam scanning electron microscopy, and energy dispersive spectrometry analyses were used to confirm the catalytic activity, microstructure, and composition, respectively. The energy conversion efficiency (ECE) as a function of time and ECE of the DSSC with Pt and CoSi counter electrodes were maintained for 504 hours. However, after 672 hours, the ECEs decreased to a half of their initial values. The results of the catalytic activity analysis showed that the catalytic activities of the Pt and CoSi counter electrodes decreased to 64% and 57% of their initial values, respectively(after 840 hours). The microstructure analysis showed that the CoSi layer improved the durability in the electrolyte, but because the stress concentrates on the contact surface between the lower quartz substrate and the CoSi layer, cracks are formed locally and flaking occurs. Thus, deterioration occurs due to the residual stress built up during the silicidation of the CoSi counter electrode, so it is necessary to take measures against these residual stresses, in order to ensure the reliability of the electrode.