• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.8
• /
• pp.1086-1091
• /
• 2011

Anti-oxidative activity and tyrosinase inhibitory activity of various ethanol extracts of Polygoni multiflori radix (PMR) and Cynanchi wilfordii radix (CWR) were compared to identify an anti-oxidant and whitening agent source from nature. We conducted an investigation into the anti-oxidant activities of PMR and CWR ethanol extracts by measuring total polyphenol content, total flavonoid content, and ABTS radical capacity. The total polyphenol contents of PMR and CWR were 17.31${\pm}$0.54 mg GA/eq g, and 2.75${\pm}$0.22 mg GA/eq g, respectively. The total flavonoid contents of PMR and CWR were 6.38${\pm}$0.39 mg naringine/eq g, and 1.34${\pm}$0.09 mg naringine/eq g, respectively. The 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid) radical decolorization of PMR and CWR were 96.89${\pm}$0.21% at 1 mg/mL and 93.49${\pm}$0.76% at 50 mg/mL. Melanoma cells were cultured with the PMR and CWR ethanol extracts for 48 hr, and total melanin content as a final product and the activity of tyrosinase, a key enzyme, in melanogenesis, were estimated. The PMR and CWR ethanol extracts increased melanin content and tyrosinase activity in a dose-dependent manner. These results suggest that PMR and CWR ethanol extracts could be useful as a skin whitening agent.

• Economic and Environmental Geology
• /
• v.43 no.6
• /
• pp.555-564
• /
• 2010

Remediation process by using the bio-carrier (beads) with dead Bacillus sp. B1 and polysulfone was investigated for heavy metal contaminated groundwater. Sorption batch experiments using the bio-carrier were performed to quantify the heavy metal removal efficiencies from the contaminated solution. The analyses using SEM/EDS and TEM for the structure and the characteristic of precipitates on/inside the beads were also conducted to understand the sorption mechanism by the bio-carrier. Various amounts of freeze-dried dead Bacillus sp. B1 were mixed with polysulfone + DMF(N,N-dimethylformamide) solution to produce the bio-carrier (beads; less than 2mm in diameter) and 5% of Bacillus sp. B1 in the bio-carrier was optimal for Pb removal in the solution. The removal efficiency ratings of the bio-carrier for Pb, Cu and Cd were greater than 80% after adding 2g of bio-carrier in 50ml of aqueous solution (<10mg/L of each heavy metal concentration). Reaction time of the bio-carrier was very fast and most of the sorption reaction for heavy metals were completed within few hours. Batch experiments were duplicated at various pH conditions of aqueous solutions and Cu and Pb removal efficiencies highly maintained at wide pH ranges (pH 2-12), suggesting that the bio-carrier can be useful to clean up the acidic waste water such as AMD. From SEM/EDS and TEM analyses, it was observed that the bio-carrier was spherical shape and was overlapped by many porous layers. During the sorption experiment, Pb was crystallized on the surface of porous layers and also was mainly concentrated at the boundary of Bacillus sp. B1 stroma and polysulfone substrate, showing that the main mechanism of the bio-carrier to remove heavy metals is the sorption on/inside of the bio-carriers and the bio-carriers are excellent biosorbents for the removal of heavy metal ions from groundwater.

• Journal of Dairy Science and Biotechnology
• /
• v.14 no.2
• /
• pp.157-164
• /
• 1996

This study aimed increase the quality during ripening of Cheddar cheese made with proteinase-negative mutant of Streptococcus lactis KCTC 1913 selected by curing. The degradation of protein during cheese ripening were investigated by electrophoresis and chromatography. The results were summarized as follow ; 1. The number of lactic acid bacteria decreased with the ripening stage, and that of the control cheese decreased faster than that of the cheese made with mutant. 2. Polyacrylamide gel electrophoretic analysis of cheese caseins revealed no difference between the cheese made with mutant and the control cheese, but differences along with the ripening stage were evident. 3. On Sephadex G-25 column chromatography, the extracts of bitter components from the green cheese and 3 month ripended cheese were fractionated into 3 fractions. With the progress of ripening, bitter peptides were degraded to rather small peptides or free amino acids. 4. Sensory evaluation of the 3 month ripended Cheddar cheese found no significant differences in color but the cheese made with mutant evidenced higher palatability in flavor and better texture than the control cheese. 5. The yields of the cheddar cheese made with mutant was 0.14% higher than that of the control cheese.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.2
• /
• pp.124-128
• /
• 2016

The objective of this research was to determine the effects of harvesting frequency and fertilization levels on botanical composition, dry matter yield, and forage feed compositions of Alpine grassland at 800 m altitude. This research lasted for three years at National Alpine Agricultural Research Institute in Pyeongchang with two harvesting frequency schedules (two and three times annually) and two levels of fertilizer application (conventional level of fertilizer at 280-200-240 kg/ha and a lower level of fertilizer at 200-200-200 kg/ha for N, $P_2O_5$, and $K_2O$). Mixture combinations with seeding rate (kg/ha) were as follows: Orchardgrass 18, Tall fescue 9, Timothy 8, Kentucky bluegrass 3, and Ladino Clover 2. The gramineae ratio ranged from 93.2 to 95.3%. Therefore, gramineae forage was considered as the dominant plant in this experiment. No significant (p>0.05) difference was observed in forage dry matter yield between the two harvesting frequency treatments (two times at 9.8 ton/ha and three times at 8.6 ton/ha). However, forage dry matter yield in the two times of harvesting frequency tended to be greater than that in the three times of harvesting frequency. Significantly (p<0.05) higher forage dry matter yield in the standard fertilization level group than the lower fertilization level group (9.8 ton/ha vs. 8.7 ton/ha) was observed. However, there was no significant (p>0.05) difference in forage crude protein concentration between the two harvesting frequency treatment groups, although the concentration in the group with three times of harvesting frequency tended to be higher. In contrast, crude fiber concentration in the group with two times of harvesting frequency tended to be higher, although the difference was not statistically significant (p>0.05). Crude protein, ether extract, crude fiber, and organic matter concentrations were not significantly (p>0.05) different between the two groups with different fertilization levels. Based on these results, it was concluded that the group with two times of harvesting frequency with conventional fertilization level might be proper for obtaining better forage productivity for Alpine grassland at 800 m altitude.

• Korean Journal of Remote Sensing
• /
• v.14 no.3
• /
• pp.213-222
• /
• 1998

Electro-Optical Camera(EOC) is the main payload of the KOrea Multi-Purpose SATellite(KOMPSAT) with the mission of cartography to build up a digital map of Korean territory including a Digital Terrain Elevation Map(DTEM). This instalment which comprises EOC Sensor Assembly and EOC Electronics Assembly produces the panchromatic images of 6.6 m GSD with a swath wider than 17 km by push-broom scanning and spacecraft body pointing in a visible range of wavelength, 510~730 nm. The high resolution panchromatic image is to be collected for 2 minutes during 98 minutes of orbit cycle covering about 800 km along ground track, over the mission lifetime of 3 years with the functions of programmable gain/offset and on-board image data storage. The image of 8 bit digitization, which is collected by a full reflective type F8.3 triplet without obscuration, is to be transmitted to Ground Station at a rate less than 25 Mbps. EOC was elaborated to have the performance which meets or surpasses its requirements of design phase. The spectral response, the modulation transfer function, and the uniformity of all the 2592 pixel of CCD of EOC are illustrated as they were measured for the convenience of end-user. The spectral response was measured with respect to each gain setup of EOC and this is expected to give the capability of generating more accurate panchromatic image to the users of EOC data. The modulation transfer function of EOC was measured as greater than 16 % at Nyquist frequency over the entire field of view, which exceeds its requirement of larger than 10 %. The uniformity that shows the relative response of each pixel of CCD was measured at every pixel of the Focal Plane Array of EOC and is illustrated for the data processing.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.212-228
• /
• 2013

Stone cultural heritages are repaired by the use of metal stiffeners. The problem is that this type of repair has been based on the experience of workers without specific guidelines and has caused various problems. This is to suggest the structural reinforcement and behavioral characteristics of metal rods to minimize the secondary damage of materials and have the specimens tested and verified to establish the guidelines on how to insert metal stiffeners. When only epoxy resin is applied to the cut surface, only 70% of the properties of the parent material are regenerated and it is required to structurally reinforce the metal stiffener for the remaining 30%. The metal rod is under the structural behavior after the brittle failure of stone material and the structural behavior does not occur when the metal stiffener is below 0.251%. When it accounts for over 0.5%, it achieves structural reinforcement, but causes secondary damage of parent materials. The appropriate ratio of metal stiffener for the stone material with the strength of $1,500kgf/cm^2$, therefore, should be between 0.283% and 0.377% of the cross section of attached surface to achieve reversible fracture and ductility behavior. In addition, it is more effective to position the stiffeners at close intervals to achieve the peak stress of metal rod against bending load and inserting the stiffener into the upper secions is not structurally supportive, but would rather cause damage of the parent material. Thus, most stiffeners should be inserted into the lower part and some into the central part to work as a stable tensile material under the load stress. The dispersion effect of metal rods was influenced by the area of reinforcing rods and unrelated to their diameter. However, it ensures stability under the load stress to increase the number of stiffeners considering the cross section adhered when working on large-scale structures. The development length is engineered based upon the diameter of stiffener using the following formula: $l_d=\frac{a_tf_y}{u{\Sigma}_0}$. Also, helically-threaded reinforcing rods should be used to perform the behaviors as a structural material.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.3
• /
• pp.24-51
• /
• 2021

Since June 2006, there have been active efforts to systematize the permission system including the amendment of [Cultural Heritage Protection Act]. Cultural Heritage Administration prepared standards on reviewing each type of cultural heritages(CH) in 2015, promoted a project on the modification of permission standards and showed remarkable performances in quantitative aspects. But as there has been little change for the cases applied for permission, additional studies on policy are required to improve the management efficiency and reduce the citizens'inconvenience. In response, this study aims to identify the actual management status on the current state alteration permission system, and establish practically utilizable reference materials at permission review. While historic sites(HS) constitute a relatively small proportion in state-designated CHs, they are subject to the designation of permission standards. Also, with their location in the downtown area, the application rate is high (51.4%) and the results are commonly utilizable to other types of CH. We constructed a DB based on the minutes of Cultural Heritage Committee(CHC) on HS and categorized similar features in permission handling results. The result of the analysis is as follows. Out of a total of 5,243 cases for permission applied for HS, 1,734 cases of cultural heritage areas(CHA) and 3,509 cases of historic and cultural environment preservation areas(HCEPA) have been applied. CHA has a great proportion of the applications for events and festivals, which are highly related to CHs or representing the local area. There is a high permission rate on applications for the purpose of public service by local governments. Meanwhile, HCEPA has a high proportion of applying for the installation and extension of buildings and facilities at the private level. Thus, negative decisions were made for tall buildings, massed facilities, or suspected scattering of similar acts. Our actual condition analysis has identified a total of 78 types of harmful acts which may influence the preservation of CHs. 31 types in CHA and 37 types in HCEPA are categorized. Especially, 10 common types of permission have been confirmed in both sectors. As a result, it is expected to secure consistency in the permission administration, enhance the management efficiency and improve the public's satisfaction over the regulatory administration by providing practically utilizable reference materials for altering the current state of CH and for decision making on the part of CHC.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.100-117
• /
• 2020

National Treasure no. 101, the stupa of State Preceptor Jigwang from the Beopcheonsa Temple Site in Wonju has been transferred from place to place and reassembled several times since it was built. In particular, overall dismantling and repair was carried out in 1957 to restore parts damaged by bombing during the Korean War. Documented information on the repair process and materials used at that time does not exist. However, various types of metal materials used for this stupa have been identified during conservation work. Besides clamps anchor bolts, 9mm-thick circular rebars were mainly used for joining the parts of this stupa, while circular rebars and wires of various thicknesses were used for joining the parts with mortar restoration materials. Although deformed bars are typically used for stone pagodas classified as architectural structures, smooth circular rebars were used in this case. In terms of restoration using mortar, material shapes were transformed, bound alternately, and twisted irregularly to improve bonding strength and coherence in order to insert restoration materials and to bolster structural weaknesses. In addition, metallographic analysis showed the material to be hypo-eutectoid steel with low carbon content. Many non-metallic inclusions in the shape of drops of different sizes were included, which do not affect the whole elemental composition due to the very small quantities involved. Qualitative and EPMA analysis of Mn and S, which were not identified by SEM-EDS area analysis, established an even distribution of MnS in crystal grains of the microstructure, regardless of the shape of the samples. It is presumed that secondary homogenization and softening might have been conducted after manufacturing to facilitate the working process. Furthermore, in consideration of properties indicating that the thinner the steel is, the less carbon content contained and the greater the elasticity and elongation, it is judged that restoration work was ordered.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.1
• /
• pp.16-22
• /
• 2021

This experiment was conducted to study on the growth characteristics and seed productivity of Italian ryegrass (Lolium multiflorum Lam., IRG) planted in the Spring in Gangwon Highland according to the seeding distance (20, 30 and 40 cm). The field was located in highland around 600 m above sea level. The experimental design was randomized block design with three replication and the tested IRG variety was 'Greencall' developed by National Institute of Animal Science (NIAS). IRG was sown on March 26, 2020, and harvested on July 2. The plant height was the shortest at 80.5 cm in the 40 cm seeding distance plot (P<0.05), and there was no significant difference between the 20 and 30 cm seeding distance. The number of spike per square meter (㎡) was significantly higher in the 20 cm seeding distance plot than that of 40 cm (937 vs. 571). The dry matter (DM) content of seed and straw after harvesting was 49.70 and 33.36 % on average, and there was no significant difference between treatments (P>005). However, there was a significant difference in the fresh and DM yield of seeds and straw (P<0.05). DM yield of seeds was significantly higher in 20 cm distance than that of 40 cm, and the yield of straw was the same trend. On the other hand, there was no significant difference in DM yield between 20 cm and 30 cm and also in the feed value of straw after seed harvesting among seeding distance. The average CP, ADF, NDF, and TDN contents were 6.91, 36.76, 61.75 and 59.86%, respectively, and the RFV value was 91. Considering the above results, the production of Italian ryegrass seeds sown in the spring in the highlands of the Gangwon is lower than that of autumn sowing, but it is judged that it needs to be reviewed in case it is unavoidable. In the future, there should be an economic analysis and the development of technology that can increase production.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.3
• /
• pp.153-161
• /
• 2023

The worldwide effects of COVID-19 have led to a surge in online shopping and contactless services. The consumption pattern has caused the issues such as the environmental pollution together with the increase of plastic waste. Reducing the reliance on the petroleum based plastic use for the package and replacing it with environmentally friendly material are the simple ways in order to solve those problems. Paper is an eco-friendly product with high recyclability as the food packaging materials but has still poor barrier properties. A barrier coating on surface of the paper can be achieved with the proper packaging materials featuring water, gas and grease barrier. Polyethylene (PE) or polypropylene (PP) coatings which are generally laminated or coated to paper are widely used in food packaging applications to protect products from moisture and provide water or grease resistance. However, recycling of packaging containing PE or PP matrix is limited and costly because those films are difficult to degrade in the environment. This study investigated the recyclability of modified acrylic emulsion coating papers compared to PE and PP polymer matrixes as well as their mechanical and gas barrier properties. The results showed that PE or modified acrylic emulsion coated papers had better mechanical properties compared to the uncoated paper as a control. PE or PP coating papers showed strong oil resistance property, achieving a kit rating of 12. Those papers also had a significantly higher percentage of screen reject during the recycling process than modified acrylic coated paper which had a screen rejection rate of 6.25%. In addition an uncoated paper had similar value of a screen rejection rate. It may suggest that modified acrylic emulsion coating paper can be more easily recycled than PE or PP coating papers. The overall results of the study found that modified acrylic emulsion coating paper would be a viable alternative to suggest a possible solution to an environmental problem as well as enhancing the weak mechanical and poor gas barrier properties of the paper against moisture.