• Restorative Dentistry and Endodontics
• /
• v.32 no.5
• /
• pp.403-410
• /
• 2007

The purpose of this study was to investigate whether rhBMP-2 (BMP2) could induce synergistic effect with $Pro-Root^{(R)}$ MTA (MTA) in pulpotomized teeth in the rats. Healthy upper first molars from thirty-two, 10 weeks old, Sprague-Dawley rats were used for this investigation. The molars were exposed with round bur, and light pressure was applied with sterilized cotton to control hemorrhage. 1.2 grams of MTA cement was placed in right first molars as a control group. In left first molars, $1\;{\mu}g$ of BMP2 was additionally placed on exposed pulps with MTA. All cavities were back-filled with light-cured glass-ionomer cements. The rats were sacrificed after 2 weeks and 7 weeks, respectively. Then histologic sections were made and assessed by light microscopy. Data were statistically analyzed via student t-test with SPSSWIN 12.0 program (p < 0.05). Inflammation observed in 2 weeks groups were severe compared to the 7 weeks groups. But the differences were not statistically significant. BMP2-addition groups had less inflammation than MTA groups in both periods, though these differences were also not statistically significant. In conclusion, the combination of BMP2 and MTA showed no differences with MTA only for pulpotomy of rat teeth.

• 전기의세계
• /
• v.41 no.12
• /
• pp.21-30
• /
• 1992

내연기관의 가솔린자동차보다 역사가 오래된 전기자동차는 상대적으로 주생성능과 가격 경쟁력의 열세로 그 자취를 감추었고 최근까지 주로 특수목적의 단거리 저속차량으로 사용되고 있다. 그러나 1890년대 후반부터 전세계가 자동차배기가스에 의한 대기오염과 지구온난화 현상등의 문제를 심각하게 공감하게 되었고 마침내 미국 캘리포니아주에서는 전가자동차의 강제판매를 규정화하게 이르렀다. 이 규정에 의하면 1998년도부터 차량 판매대수의 2%를 전기자동차 판매로 강제요구하고 있다. 이 비율은 2000녀도에 5% 2003년에는 10%로 늘어날 계획이다. 따라서 미국에 많은 자동차를 수출하고 있는 일본, 독일 및 여러 유럽국가에서는 이 사업에 막대한 자금을 투자하며 개발에 몰두하고 있다. 미국의 Big3도 에너지성의 도움으로 최근 USABC를 결성하여 전기자동차 개발에 박차를 가하고 있다. 지금까지 기존의 가솔린자동차 기술에 있어서 일본과 독일에 상대적 열세에 있었던 미국도 이번 캘리포니아주의 전기자동차 강제판매 규정에 따른 전기자동차 사업으로 미국자동차 시장의 새로운 판도를 조성하겠다는 의도인듯하다. 국내에서도 정부가 이 사업의 중요성을 심각히 인식하고 G7사업과제의 하나로 선정하여 산, 학, 연 각층의 전문가가 참여하여 성공적으로 개발을 마칠 수 있도록 적극 지원하고 있다. 지금까지의 평균주행성능을 보면 최고속도 100-120km/h, 일층전 최대주행거리 150-200km 정도이며, 아직 양산체제에 돌입하지 않았기 때문에 가격면에서 경쟁력이 없는 실정이다. 그러나 1990년도에 들면서 각종 요소부품들의 기술수준이 급성장을 이루어서 앞으로 10년정도 후면 성능과 가격면에서 가솔린자동차와 대등한 수준의 전기자동차 개발이 실현될 수 있으리라 예측된다.는 영향받지 않았다. Clonidine의 심박수 감소작용은 .뇌실내및 정맥내 diltiazem이나 nifedipine 처리후에 감약되었다. 5). 뇌실내 clonidine$(30{\mu}g)$ 처 리후 뇌실내 diltiazem$(400{\mu}g)$과 nifedipine$(350{\mu}g)$의 혈압하강및 심박수 감소효과는 영향 받지 않고 그대로 나타났다. 이상의 결과로 diltiazem과 nifedipine은 가토뇌내에서 methoxamine에 의한 혈압상승의 작용점인 alrfia-1 adrenoceptor의 흥분에는 영향을 미치지 못하나 clonidine의 작용점인 alpha-2 adrenoceptor의 흥분에 의한 혈압하강및 심박수 감소효과는 억제한다고 추론하였다.thin 함량은 110.6 mg/L로서 산업적인 생산성이 있는 것으로 나타났다. 이번 연구를 통하여 개발된 변이주 B76 및 이의 대량 발효를 위한 최종조건의 정립은 향후 astaxanthin의 산업적 생산공정에 필요한 기초자료로 이용될 것으로 기대된다.색총말내에 소형의 도형, 소형의 장형 연접소포 및 DENSE CORE VESICLE의 3가지 연접소포를 가지고 있었고 출현빈도수는 촉각엽에서 가장 큰 33%이었다. 제5형 신경연접은 축색종말내에 중등도크기의 원형, 대형의 원형연접소포 및 DENSE CORE VESICLE을 포함하였고 13%의 출현빈도수로 관찰되었다. 배추횐나비의 촉각에 있는 지각신경세포가 뇌의 촉각엽으로 뻗어 들어가 위의 5가지 신경연접중 어느 형을 형성하는지를 관찰하기 위하여 좌측 촉각의 기부를 제거하여 지각신경세포를 절단하였는데 그 결과, 좌측 촉각엽에서 제4형의 신경연접이 퇴행성 변화를 나타내었다.

• Journal of fish pathology
• /
• v.24 no.2
• /
• pp.121-129
• /
• 2011

Aquatic animal raised in hatcheries play an important role in supplying seedling to stock enhancement and seed quality, especially, seed health is the key factor for survival in the field after release and for stocking effectiveness. We have inspected the hatchery-reared seeds of 33 marine species and 12 freshwater species for legally designated diseases in stock enhancement program in 2010. Results showed that abalone was the most abundant as 20.0% in the marine species group and then sea cucumber (15.6%), olive flounder (8.4%), rockfish (6.7%), black sea bream (6.3%) and swimming crab (6.1%) were followed. Crucian carp was the most abundant as 19.4%, and then eel (11.8%), Korean bullhead (10.9%), mandarin fish (10.8%), melanian snail (8.4%), catfish (7.7%) were followed in the freshwater species group. The total number of inspection cases for eight pathogens in this study were 2,105 and disqualification cases were 30 by detection of aquatic animals pathogens such as koi herpesvirus (KHV), red sea bream iridovirus (RSIV), white spot syndrome virus (WSSV) or viral haemorrhagic septicemia virus (VHSV).

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.3
• /
• pp.65-75
• /
• 2017

As a 360-degree image carries information of all directions, it often has too much information. Moreover, in order to investigate a 360-degree image on a 2D display, a user has to either click and drag the image with a mouse, or project it to a 2D panorama image, which inevitably introduces severe distortions. In consequence, investigating a 360-degree image and finding an object of interest in such a 360-degree image could be a tedious task. To resolve this issue, this paper proposes a method to find a region of interest and produces a 2D naturally looking image from a given 360-degree image that best matches a description given by a user in a natural language sentence. Our method also considers photo composition so that the resulting image is aesthetically pleasing. Our method first converts a 360-degree image to a 2D cubemap. As objects in a 360-degree image may appear distorted or split into multiple pieces in a typical cubemap, leading to failure of detection of such objects, we introduce a modified cubemap. Then our method applies a Long Short Term Memory (LSTM) network based object detection method to find a region of interest with a given natural language sentence. Finally, our method produces an image that contains the detected region, and also has aesthetically pleasing composition.

• The korean journal of orthodontics
• /
• v.30 no.3 s.80
• /
• pp.273-285
• /
• 2000

The aim of this investigation was to evaluate the differences of two canti-leyer springs by using a new simulation system. This was done using a Calorific machine that compared iron uprighting spring and root uprighting spring. The Calorific machine was designed to allow observation of the whole process of tooth moving, and is composed of three parts(a temperature regulating system, electro-thermodynamic teeth, and an artificial alveolar bone component). The experiment of both mechanics were repeated five times and measured two times. The intra-examiner agreement and inlet-examiner agreement were $96.54\%\;and\;95.73\%$ and these data were statistically tested by paired t-test. The obtained results were as follows. 1. Distal and buccal movement of the anchor teeth were observed greater in the root uprighting spring than the crown uprighting spring. 2. Crown uprighting spring showed distal movement of the crown of lower second molar for 3.29mm but root uprighting spring showed only 1.68mm. 3. Crown uprighting spring exhibited forward movement of mesial and distal root of the lower second molar for 3.91mm, 3.60mm but the root uprighting spring showed 6.76mm, 6.26mm.

• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.263-271
• /
• 1995

The purpose of this study nab to evlauate and compare the effect of the variable factors of wire on the elastic properties of looped rectangular wire. Five variable factors were presented-material(Hi-T, blue Elgiloy), wire size(.016'$\;\times\;$.022', .018'$\;\times\;$.025'), loop length(15mm, 20mm), loop configuration(open loop, closed loop), gabling (non-gable, gable). So, the total 256 specimens were divided into 32 groups, and each of those nab pulled on Instron testing machine. The load-deflection curve of each wire obtained, from which force, range in elastic limit, and stiffness were computed and analyzed statistically. The results were obtained as follows : 1. All of the variable factors - wire material, size, loop length loop configuration, and gabling - took a significant effect on load-deflection rate of looped wire. 2. The force at elastic limit was the smallest in the group of Hi-T, .016'$\;\times\;$.022', 20mm loop length, open loop, non-gable, and the largest in the group of blue Elgiloy, .018'$\;\times\;$.025', 15mm loop length, closed loop, non-gable. 3. The range at elastic limit was the smallest in the group of Hi-T, .018'$\;\times\;$.025', 15mm loop length, open loop, non-gable, and the largest in the group of HI-T, .016'$\;\times\;$.022', 20mm loop length, closed loop, gable. 4. Loop configuration and loop length were the most effective factors on the elastic properties of looped wires, and gabling was the least effective.

• Journal of the Korea Computer Graphics Society
• /
• v.21 no.3
• /
• pp.1-10
• /
• 2015

One way to create a visually immersive environment is to utilize a front projection system. Especially, when enough space is not available behind the screen, it becomes difficult to install a back projection system, making the front projection an appropriate choice. A drawback associated with the front projection is, however, the interference of shadow. The shadow can be cast on the screen when the user is located between the screen and the projector. This shadow can negatively affect the user experience and reduce the sense of immersion by removing important information. There have been various attempts to eliminating shadows cast on the screen by using multiple projectors that compensate for each other with missing information. There is trade-off between calculataion time and desired accuracy in this mutual compensation. Accurate estimation of the shadow usually requires heavy computation while simple approaches suffer from inclusion of non-shadow regions in the result. We propose a novel approach to removing shadows created in the front projection system using the skeleton data obtained from a depth camera. The skeleton data helps accurately extract the shape of the shadow that the user cast without requiring much computation. Our method also utilizes a distance field to remove the afterimage of shadow that may occur when the user moves. We verify the effectiveness of our system by performing various experiments in an interactive environment created by a front projection system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.113-130
• /
• 2011

Due to the development of information and communication technology, the global influence on politics, economics, society, and culture has grown. A major example of this impact on the economic sector is the growth of e-commerce, which increases both the speed and efficiency of businesses. In light of these new developments, businesses need to shift away from the misconception that information overwhelms to embrace the enhanced competitiveness that e-commerce provides. However, concern about fraudulent transactions through e-commerce is pertinent because of the loss in both critical revenue and consumer confidence in open markets. Current solutions for fraudulent transactions include real-time monitoring and processing, payment pending, and confirmation through SMS, E-mail, and other wired means. Our research focuses on the management of Fraud Detection Systems (FDS) to safeguard online electronic payment systems. With effective implementation of our research we hope to foster an honorable online trading culture and protect consumers. Future comparative research in domestic and abroad markets would provide further insight into preventing fraudulent transactions.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.2
• /
• pp.139-147
• /
• 1994

Orthophosphate crystals were grown by the hydrothermal method and the properties of grown crystals were investigated by means of X-ray diffraction. Vickers hardness tester, etc. The starting powders of $AIPO_4 and GaPO_4 $were prepared as a single phase by the solid state reaction of stoichiometric mixture of $AI_2O_3 or Ga_2O_3$ and $NH_4H_2PO_4$ and the subsequently by the hydrothermal treatment. The hydrothermal conditions for high growth rates of the orthophosphate crystals are as follows: $AlPO_4$ crystal; temperature ranges, between $170$~$200^{\circ}C$; temperatures difference, $15$~$20^{\circ}C;$, hydrothermal solvent, 4m HCl, $GaPO_4 crystal; temperature ranges, between $210 and 240^{\circ}C;$; temperature difference, $25$~$30^{\circ}C; $, hydrothermal solvent, 4m HCl. Morphologies of grown crystals tended to be bounded by (1010), (1011) and (0111) faces at low temperatures, and grew with well developed (0001) faces by increasing the growth temperature. On the other hand, the properties of orthophosphate crystals $(AlPO_4/GaPO_4)$ were as follows: lattice parameters (nm); a=0.494, c=1.094/a=0.490, c=1.105, density (gcm-3); 2.62/3.56, Vickers hardness (Nm^2); $1.02{\times}10^1^0/7.06{\times}10^9$, refractive indices; $ne=1.529{\pm}0.003, no=1.519{\pm}0.003/ne=1.611{\pm}0.006, no=1.599{\pm}0.006, birefringence; {\pm}0.01/{\pm}0.012$, dielectric constant (Fm-1); 6/7.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.3
• /
• pp.44-51
• /
• 2009

It is very important to verify generated setup errors in cancer therapy by using a high energy radiation and to perform the precise radiation therapy. Specially, the verification of treatment position is very crucial in special therapies like fractionated stereotatic radiotherapy (FSRT). The FSRT uses normally high-dose, small field size for treating small intracranial lesions. To estimate the developed FSRT system, the isocenter accuracy of gantry, couch and collimator were performed and a total of inaccuracy was less than ${\pm}1mm$. Precise beam targeting is crucial when using high-dose, small field size FSRT for treating small intracranial lesions. The EPID image of the 3mm lead ball mounted on the isocenter with a 25mm collimator cone was acquired and detected to the extent of one pixel (0.76mm) after comparing the difference between the center of a 25mm collimator cone and a 3 mm ball after processing the EPID image. In this paper, the radiation treatment efficiency can be improved by performing precise radiation therapy with a developed video based EPID and FSRT at near real time