• The Korean Journal of Pesticide Science
• /
• v.20 no.2
• /
• pp.93-103
• /
• 2016

A simultaneous analytical method was developed for the determination of isoxaflutole and metabolite (diketonitrile) in agricultural commodities. Samples were extracted with 0.1% acetic acid in water/acetonitrile (2/8, v/v) and partitioned with dichloromethane to remove the interference obtained from sample extracts, adjusting pH to 2 by 1 N hydrochloric acid. The analytes were quantified and confirmed via liquid chromatograph-tandem mass spectrometer (LC-MS/MS) in positive-ion mode using multiple reaction monitoring (MRM). Matrix matched calibration curves were linear over the calibration ranges ($0.02-2.0{\mu}g/mL$) for all the analytes into blank extract with $r^2$ > 0.997. For validation purposes, recovery studies were carried out at three different concentration levels (LOQ, 10LOQ, and 50LOQ) performing five replicates at each level. The recoveries were ranged between 72.9 to 107.3%, with relative standard deviations (RSDs) less than 10% for all analytes. All values were consistent with the criteria ranges requested in the Codex guideline (CAC/GL40, 2003). Furthermore, inter-laboratory study was conducted to validate the method. The proposed analytical method was accurate, effective, and sensitive for isoxaflutole and diketonitrile determination in agricultural commodities.

• Journal of Ginseng Research
• /
• v.28 no.4
• /
• pp.201-206
• /
• 2004

This experiment was conducted to determine the economic application method of Yakto among 6 application method : amount of Yakto application $3\;plot(70\;l,\;25.5\;l,\;13,3\;l/kan;\;180cm{\times}90cm),$ and added side dressing(3 l/kan) each plot. The reduced amoumt of Yakto application(25.5 l, 13.3 l/kan) were lower the contents of inorganic nitrogen, $P_{2}O_{5},\;K,\;Ca$ and Mg, but similar pH in bed soil compared with standard Yakto application(70 l/kan). Side dressing applicated on 29 May increased the contents of inorganic nitrogen, $P_{2}O_{5},\;K,\;Ca,\;Mg$ and salt concentration in bed soil compared with non­side dressing in each Yakto application plot(70 l, 25.5 l, 13,3 l/kan). The reduced amoumt of Yakto application(25.5 l/kan) added side dressing(3 l/kan) were similar the contents of inorganic nitrogen, K, Mg and salt but lower $P_{2}O_{5}$ and Ca in bed soil compared with standard Yakto application(70 l/kan) in June. The reduced amoumt of Yakto application(25,5 l/Kan) added side dressing(3 l/kan) was similar the contents of P, K, Ca and Mg but lower N in leaves compared with standard Yakto application(70 l/kan). The reduced amoumt of Yakto application(25.5 l/kan) added side dressing(3 l/kan) was shorter stem length, and higher $5{\%}$ chlorosis of leaf tip, but similar emergence ratio, survival ratio, leaf senescence ratio, chlorophyll, stem diameter and leaf area compared with standard Yakto application(70 l/kan). These suggested that 25.5 l Yakto application added side dressing(3 l/kan) per kan might be possible economical application method of Yakto.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.3
• /
• pp.123-135
• /
• 2006

Spatial variability and distribution map of soil properties and the relationships between soil properties and crop yields are not well characterized in agroecosystems that have been land leveled to facilitate more cultivation of the new reclaimed sloping highland. Potato, onion, carrot, Chinese cabbage and radish were grown on the coarse sandy loam soil in 2004. Soil moisture content, soil penetration resistance and crop yield were sampled in the $10m{\times}50m$ field consisted of five plots. Sampling sites of each cultivation plot were 33 for the soil moisture, 11 for the soil penetration and 33 for the crop yield. The results of semivariance analysis, most of models were shown spherical equation. The significant ranges of each spatial variability model for the soil moisture, soil penetration and crop yield were broad as 33-35 meters in the potato cultivation plot, and that in the Chinese cabbage cultivation plot was narrow as 5-6 meters. The coefficient of variances (C.V.) of moisture, penetration and yield were various from 14 to 59 percents in five cultivation plots. The highest C.V. of potato yield was 59 percents, and that of the radish cultivation plot was as low as 14 percents. The required sample numbers for the determination of soil moisture content, soil penetration resistance and crop yield with error 10% at 0.05 significant level were ranged 8-40 for soil moisture, 7-25 for soil penetration and 424-4,678 for crop yield. The variogram and distribution map by kriging described field characteristics well so that the spatial variability would be useful for soil management for better efficiency and precision agriculture in the reclaimed highland.

• Food Science and Preservation
• /
• v.10 no.1
• /
• pp.47-53
• /
• 2003

This study was carried out to investigate the quality characteristics and its distribution of Fuji Apple produced in Korea. The appels were collected 1mm the major producing areas of the apples, Cheongsong, Yechun, Bongwha, Singju and Yesan. Quality characteristics of the apples produced in these areas for 3 years were measured in terms of redness, size, weight, uniformity, defects, sweetness, firmness, pH and total acidity, The average redness for 3 years in the apples was 88.94% and the apples in the third year had the highest value, 93.88%, in redness. The average size toy 3 years in the apples was 87.17mm and the average weight was 276.74g. In external appearance, defects on the surface of the apples caused by physical factors were more serious than those by insects. Sweetness was 14.81$^{\circ}$Brix and its variation was 1.78$^{\circ}$Brix. The average firmness for 3 years in the apples was 0.83kgf, The pH value and total acidity for 3 years in Fuji apples were 3.83 and 0.32 ％, respectively, and the values had no significant difference between production years. According to the producing areas, the apples of area A in redness showed the highest value, 91.10% and these of area D showed the lowest value, 86.15%. The highest value for size was 88.12mm for area C and the lowest value was 86.40mm for area D. The apples of area B had the heaviest weight, 280.49g and these of area D in weight had the lowest value, 273.89g. No great difference showed in external defects and total acidity of the apples among the areas. In sweetness by districts, the apples of area E had the highest value, 15.32$^{\circ}$Brix, while area B was for the lowest value, 14.58$^{\circ}$Brix. The firmness of Fuji apples produced in area D and E was the highest value, 0.83kgf, and the apples of area C were the lowest value, 0.76kgf far firmness.

• Geophysics and Geophysical Exploration
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2014

To reveal and classify site characteristics in densely populated areas in Chuncheon, Korea, Rayleigh-waves were recorded at 50 sites including four sites in the forest area using four 1-Hz velocity sensors and 24 4.5-Hz vertical geophones during the period of January 2011 to May 2013. Dispersion curves of the Rayleigh waves obtained by the extended spatial autocorrelation method were inverted to derive shear-wave velocity ($v_s$) models comprising 40 horizontal layers of 1-m thickness. Depths to weathered rocks ($D_b$), shear wave velocities of these basement rocks ($v_s^b$), average velocities of the overburden layer ($\bar{v}_s^s$), and the average velocity to a depth of 30 m ($v_s30$), were then derived from those models. The estimated values of $D_b$, $v_s^b$, $\bar{v}_s^s$, and $v_s30$ for 46 sites at lower altitudes were in the ranges of 5 to 29 m, 404 to 561 m/s, 208 to 375 ms/s, and 226 to 583 m/s, respectively. According to the Korean building code for seismic design, the estimated $v_s30$ indicates that the lower altitude areas in Chuncheon are classified as $S_C$ (very dense soil and soft rock) or $S_D$ (stiff soil). To determine adequate proxies for $v_s30$, we compared the computed values with land cover, lithology, topographic slope, and surface elevation at each of the measurement sites. Due to a weak correlation (r = 0.41) between $v_s30$ and elevation, the best proxy of them, applications of this proxy to Chuncheon of a relatively small area seem to be limited.

• Journal of Environmental Policy
• /
• v.6 no.1
• /
• pp.1-40
• /
• 2007

The research in this paper, for the effective implementation of CBD PoW PA(Program of Work on Protected Areas of Convention on Biological Diversity) that was adopted by CBD COP7(Conference of the Parties) in 2004, shows the objectives and activities of 9 each subject in PoW PA regarding domestic status and cases of national park management. Before anything else, according to the result of the review on the status of protected areas in Korea, there are 1,119 protected areas which are classified into 14 types and the total area is about $15,621km^2$. After a thorough review on 9 each subject about the implementation of CBD PoW PA, we found out that some parts such as management planning, prevention and alleviation of threats, and establishment of PAs system, are improved while financial support, improved social benefit, and MEE(Management Effectiveness Evaluation} fields are need to be improved. Especially regarding time-bound, ecological gap analysis on national level and MEE are need to be improved immediately. This paper could help us to understand the current status of PAs management system in Korea and to prepare national reports of CBD and implementation report of PoW PA. Based on research and results of this paper, we need to find the fields that have gaps in order to meet the requirements of the CBD PoW PA and the implementation tools that are suitable for managing Korea's protected areas. To effectively implement the various activities which require a systematic approach on the national level, the establishment of the networks among relevant organizations for protected areas are vital. To effectively reach the ultimate goal of CBD PoW PA, reducing the rate of biodiversity loss, it is essential that lots of plans established by authorities must be carried out in a constant manner to achieve goals of CBD PoW PA.

• Journal of Bio-Environment Control
• /
• v.26 no.1
• /
• pp.7-12
• /
• 2017

This experiment was conducted to analyze the effect of drainage reuse rate on the growth and fruiting of summer paprika in closed hydroponic cultivation. The experiment was carried out for 25 weeks from March to September 2015 with 0, 20, 30, 50% mixing ratio of waste nutrient solution using non - recycling hydroponic cultivation as a control. As a result, stem diameter of the test was different in the groups 1 and 2, but no difference showed as the group progressed more than 3 groups. L.A.I tended to decrease with increasing drainage mixing ratio. The number of nodes in the 50% reuse test group was 1.4 compared to the control group, but there was no significant difference. The number of harvested nodes was significantly different in the control group (11.1 nodes) and the 50% reuse test group (8.7 nodes), and the harvested nodes tended to decrease as the drainage was reused. The ratio of harvest was also the same as that of the harvesting node, and the control was the highest at 33.2% and the lowest at the 50% reuse test at 27.6%. Relative yields were reduced by 30%, 35% and 45% in the control group in the first group, and this tendency was also observed in the second and fourth groups. However, in the 3 and 5 groups, the production of 50% test group increased by 13% and 5%. The ratio of unmarketable fruit was increased 2%, 4%, 4%, and 7% in 0%, 20%, 30% and 50% reuse test, respectively. In conclusion, if the decrease in yield due to the decline in early growth is carefully managed, even if the imbalance of inorganic ions occurs after the mid-term growth, the growth of the crop will enter into a stable period and the re-use will not be worried about the growth and the yield decrease.

• Journal of Bio-Environment Control
• /
• v.26 no.1
• /
• pp.13-18
• /
• 2017

This study was conducted to investigate optimal temperature of garlic and develop bulb weight model in harvest time. Day and night temperature in chambers was set to $11/7^{\circ}C$, $14/10^{\circ}C$, $17/12^{\circ}C$, $20/15^{\circ}C$, $23/18^{\circ}C$, $28/23^{\circ}C$(16/8h). Bulb fresh and dry weight was heaviest on $20/15^{\circ}C$. In $11/7^{\circ}C$ and $14/10^{\circ}C$, leaf number and total leaf area increased slowly. But in the harvest, leaf number and total leaf area were not significant, except $28/23^{\circ}C$. Models were developed with fresh bulb weight. As a result of analyzing the model, $18{\sim}20^{\circ}C$ certified optimal mean temperature. And the growing degree day base temperature estimated $7.1^{\circ}C$, upper temperature threshold estimated $31.7^{\circ}C$. To verify the model, mean temperature on temperature gradient tunnel applied to the growth rate model. Lineal function model, quadric model, and logistic distribution model showed 79.0~95.0%, 77.2~92.3% and 85.0~95.8% accuracy, respectively. Logistic distribution model has the highest accuracy and good for explaining moderate temperature, growing degree day base temperature and upper temperature threshold.

• Journal of Bio-Environment Control
• /
• v.18 no.3
• /
• pp.238-243
• /
• 2009

To investigate the characteristics of moisture content (MC), moisture distribution and starting point of drainage in a rockwool slab culture, time domain reflectometry (TDR) sensors were used in a drip irrigation system. MC values ($0{\sim}100%$) measured by TDR sensors in a slab were compared to those by loadcells. Seventy two seedlings of paprika (Capsicum annuum L.) were cultured for $5{\sim}6$ months in a green-house and the starting point of irrigation was determined by the average value of three TDR sensors which were inserted diagonally across the slabs under the plants. MCs as a standard for starting point of irrigation by TDR were determined with 40%, 50%, and 60%. Distribution of MCs in a slab measured with five TDR sensors equally spaced from two irrigation points were not much different when the MC in the slab increased from zero to saturation point. The saturated MCs in the slab were presented at $58{\sim}65%$ and the drain was started when the MC became around $50{\sim}55%$. At the saturated MC in the slab, TDR sensors presented 100% but the values from the loadcell showed 90% at the same time. However, measurement errors between two methods for MC remarkably decreased with a decrease in the MC in a slab. Especially when the MC was maintaining below 60%, the errors between TDR and loadcell methods for measuring MC in the rock-wool slab were less than 5%. There were no significant differences in number of fruits and fresh and dry weights of fruits when they were cultured under the different MC conditions with three irrigation regimes (40%, 50%, and 60%). These results indicated that the MC control by TDR sensors in a rock-wool based paprika culture can be suggested as a method to determine the starting point of irrigation for a soilless culture system.

• Journal of Bio-Environment Control
• /
• v.18 no.3
• /
• pp.177-184
• /
• 2009

For the purpose of reducing the cost for greenhouse operation by acquiring the electric power necessary for it, this study installed a solar photovoltaic system on the roof of the building adjacent to green-houses and experimentally examined the quantity of power generation based on weather conditions. The results of the study are as per the below: The maximum, average and minimum temperature while the experiment was conducted was $0.4{\sim}34.1,\;-6.1{\sim}22.2$, and $-14.1{\sim}16.7^{\circ}C$ respectively, and the solar radiation was $28.8MJ{\cdot}m^{-2}$ (maximum), $14.9MJ{\cdot}m^{-2}$ (average), and $0.6MJ{\cdot}m^{-2}$ (minimum). The quantity of electric power didn't increase in proportion to the quantity of solar radiation and instead, it was almost consistent around 750W. Daily maximum, average and minimum consumption of electric power was 5.2kWh, 2.5kWh and 0kWh respectively. Based on the average electric power consumption of the system used for this experiment, it was sufficient in case the capacity and the working time of a hot blast heater are small, but it was short in case they are big. In case the capacity of the hot blast heater is big, the average electric power quantity will be sufficient for array area $21m^2$, about three times of the present area. In summer when the temperature of the array becomes high, the generation of electric power didn't increase in proportion to the quantity of solar radiation, but this experiment result shows a high correlation between two factors (coefficient of correlation 0.84).