• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.1
• /
• pp.13-23
• /
• 2015

The paper experimentally deals with the radial in-plane vibration characteristics of disk-shaped piezoelectric transducers. The radial in-plane motion, which is induced due to Poisson's ratio in the piezoelectric disk polarized in the thickness direction, was measured by using an in-plane laser vibrometer, and the natural frequencies were measured by using an impedance analyzer. The experimental results have been compared with theoretical predictions obtained by simplified theoretical and finite-element analyses. It appears that the fundamental mode of a piezoelectric disk transducer is a radial mode and its radial displacement distribution from the center to the perimeter is not monotonic but shows maximum slightly apart from the perimeter. The theoretically-calculated fundamental frequencies agree well with the finite-element results for small thickness-to-diameter ratio, and they are accurate within 7 % error for the ratio up to 0.4.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.3
• /
• pp.19-28
• /
• 1990

The main purpose of this paper is to present both fundamental and some higher natural frequencies of catenary arcs. The differential equations governing planar free vibrations for these arcs are derived, in which the rotatory inertia is included, as non-dimensional forms and solved numerically to obtain frequencies and mode shapes. The hinged-hinged and clamped-clamped end constraints are applied in numerical examples. The lowest four natural frequencies are reported as the functions of non -dimensional system parameters; the slenderness ratio and the rise to span length ratio. The effects of rotatory inertia on natural frequencies are reported and some typical mode shapes are also presented.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.5
• /
• pp.179-191
• /
• 2000

본 연구에서는 화강토 지반상의 자립식 diaphragm wall의 거동을 연구하기 위하여 벽체의 근입깊이비, 지하수위 및 굴착조건(연속 및 단계굴착)을 변화시키면서 원심모형시럼을 수행하였다. 원심모형실험시 지반굴착은 흙과 동일한 밀도로 혼합된 zine chloride 용액이 배수되도록 밸브를 조작하여 실시하였으며, 굴착에 의해 발생되는 지반의 변형괴 벽체의 변위 및 휨모멘트를 시간경과에 따라 측정하였다. 실험결과, 벽체의 근입깊이비가 증가함에 따라 벽체의 휨모멘트는 증가하는 반면, 굴착과정동안 배면측에서의 간극수압 감소속도는 감소하였다. 최종 굴착단계에서 굴착후 시간경과에 따른 침하량은 굴착과정중의 침하？에 비해 5~7% 정도를 나타내었다. 최대표면침하량과 벽체변위를 굴착깊이로 정규화한 결과 최대 침하량은 벽체 변위량의 0.8~1.2배9평균0.91배)사이에 분포하였다. 굴착깊이로 전규화한 벽체변위와 근입깊이와의 관계는 지수함수식으로 제안하였다. 파괴면은 직선적인 형태로 파괴면내의 배면측 지반은 벽체를 향하여 하향의 변위를 일으키면서 벽체의 회전에 의해 파괴되었으며, 퐈괴면의 각도는 66~72.5$^{\circ}$정도로 이론적인 파괴면의 각도보다 크게 평가되었다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.6
• /
• pp.1382-1390
• /
• 1995

Electronic Speckle Pattern Interferometry (ESPI) with a CW laser, a video system and an image processor was utilized to measure the in-plane displacement. Unlike traditional strain gauges or Moire method. ESPI method measure the in-plane displacement on real time with out any surface preparation on surface attachment. The specimen has a crack of 10*0.1 mm in the middle of plate and strain gauge was also attached on that surface to compare with ESPI method. This study reveled the ESPI method to measure the displacement and distribution of strain in the specimen. It was shown in tensile tests that the measurement by ESPI method was comparable with strain gauge.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.04a
• /
• pp.48-53
• /
• 1997

Electronic Speckle Pattern Interferometry(ESPI) using the Model 95 Ar laserm, a video system and an image processor was applied to the in-plane displacement measurements. Unlike traditional strain gauges or moire method, ESPI method requires no special surface preparation or attachments and can be measured in-plane displacement with no contact and real time. In this experiment wpecimen was loaded in parallel with a loadcell. The specimen was the cold rolled sdteel sheet of 2mm thickness, which was attached strain gauges. The study provides an example of how ESPI have been used to measure strain displacement in this specimen. The results measured by ESPI have been used to measure strain displacement in this specimen. The results measured by ESPI have been used to measure strain displacement in this specimen. The results measured by ESPI compare with the data which was measured by strain gauge method in tensile testing.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.113-119
• /
• 1998

Recently Electronic Speckle Pattern Interferometry(ESPI) has been studied because it has the advantages to be able to measure the whole-field surface deformations of engineering components and materials in industrial areas with noncontact. The speckle patterns to be formed with interference phenomena of scattering light from rough surfaces illuminated by laser light have phase informations of surface deformations. In this study we used this interference phenomena and the phase shifting method to measure the inplane deformations, together with the use of digital image equipment to process the informations contained in the speckle pattern and to display consequent interferograms on TV monitor. FEA was performed before experiments and we obtained good agreement between the experimental results and FEA.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.602-604
• /
• 2011

본 연구에서는 알루미늄 폼 샌드위치 복합재료와 알루미늄 허니컴 샌드위치 복합재료의 면내 외 방향 압축실험으로 하중-변위의 관계를 분석하고 압축 특성을 비교하였다. 만능재료시험기로 1 mm/min 의 속도로 압축을 하였으며, 카메라로 실험과정을 촬영하고 로드셀에서 나오는 데이터를 컴퓨터로 저장하였다. 압축실험의 결과로 알루미늄 폼 및 허니컴 샌드위치 복합재료에서 하중이 증가함에 따라 심재에 좌굴이 발생하였다. 면내 방향 압축실험에서 알루미늄 폼 및 허니컴 샌드위치 시험편에 작용하는 압축 최대하중은 비슷하지만 비중을 고려하면 알루미늄 허니컴 샌드위치 복합재료가 더 우수한 것으로 판단되며, 면외 방향 압축실험에서도 알루미늄 허니컴 샌드위치 복합재료의 압축 최대하중이 알루미늄 폼 샌드위치 복합재료보다 높게 나왔다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.3
• /
• pp.52-57
• /
• 1997

Electronic Speckle Pattern Interferometry(ESPI) using the Model 95 Ar. laser, a video system and an image processor was applied to the in-plane displacement measurements. Unlike traditional strain gauges or Moire method, ESPI method requires no special surface preparation or attachments and can be measured in-plane displacement with no special surface preparation or attachments and can be measured in-plane displacement with no contact and real time. In this experiment specimen was loaded in parallel with a loadcell. The specimen was the cold rolled steel sheet of 2mm thickness, which was attached strain gauges. The study provides an example of how ESPI have been used to measure strain displacement in this specimen. The results measured by ESPI compare with the data which was measured by strain gauge method in tensile testing.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.179-179
• /
• 2004

최근 산업계 기술 동향은 첨단화, 고정도화 그리고 초소형화하고 있으며, 초정밀 가공 기술(nano technology)의 발전에 따른 고정밀의 계측기술이 요구되고 있는 실정이며, 기계구조 재료가 다양한 조건 하에서 사용되어지고 있다. 이에 따라 새로운 정밀계측기술 또한 급속히 발전하고 있으며, 특히 비접촉 정밀 계측 분야에서는 레이저(laser)를 이용한 광계측 방법이 선호되고 있다. 레이저를 이용한 비접촉 계측방법은 기계구조물의 미소하중, 미소균열검출, 미소변형계측, 정밀계측 등의 분야에 장점을 가지고 있어 관심이 높아지고 있다.(중략)

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.314-317
• /
• 2010

본 논문에서는 p-수렴 천이요소의 층별이론을 사용하여 균열을 갖는 적층판의 팻취보강 효과에 대해 알아보았다. 이 모델의 면내 변위는 각 구간별로 연속인 선형변화로 가정하였고, 두께방향으로의 면외 변위는 일정한 상수로 가정하여 적용하였다. 변위장의 정의는 적분형 르장드로 다항식을 적용하였다. 또한 에너지 방출률법과 VCCT 방법을 사용하여 응력확대계수를 산출하였다. 수치적분은 별도의 외삽법 없이 각층별의 절점에서 방생하는 적분 값을 바로 얻을 수 있는 가우스-로바토 적분법을 사용하여 계산하였으며, 수치예제를 통해 제안된 모델의 정확도와 기존의 3차원 고체요소를 사용한 것보다 동일한 정확도를 얻기 위해 휠씬 적은 요소 및 자유도가 사용됨을 알 수 있었다.